How to clean a burn

How to clean a burn

Burn wound treatments can range from simple to extensive depending on the severity of your burn. A basic understanding of burn wound treatment can reduce pain and…

Burn wound treatments can range from simple to extensive depending on the severity of your burn.

A basic understanding of burn wound treatment can reduce pain and facilitate healing of all four types of burns. Burns are specifically damage caused to one or multiple layers of skin and flesh by external sources such as heat or chemicals, and range in severity from minor to major. The level of severity is denoted by the “degree,” with each degree noting a higher level of damage starting at first degree and moving as far as the fourth degree. Understanding and identifying burns properly will increase your chances of successful treatment and effective healing.

Types of Burns

  • First-Degree or superficial burns are identified by pain, redness, minor swelling and an absence of blistering.
  • Second-Degree burns produce a slight thickness of the skin and may include blistering, indicating damage has been done to the underlying layers of skin.
  • Third-Degree burns feature leathery, waxen skin and are commonly accompanied by numbness due to full damage to the dermis and surrounding nerves.
  • Fourth-degree burns have extended past the skin layers and into the flesh, causing charring and irreparable damage.

Burn Wound Treatment at Home

For the majority of burns, it is strongly advised to seek immediate medical assistance. However, for superficial burns that do not exceed three inches in diameter, the victim may be reasonably capable of treating the burn from home. When handling a minor burn, it is important you follow specific steps:

  • Thoroughly wash hands using antibacterial soap
  • Run cool, not cold, water over the wounded area to reduce pain and swelling
  • Use a mild soap and water to cleanse affected area
  • Apply an antibiotic ointment if there is no opening of the skin
  • Wrap the affected area loosely with sterile gauze to avoid agitation

When to Seek Medical Assistance for a Burn Wound

Regarding second degree burns or higher, it should be left to your medical care provider to administer appropriate treatment. When released from medical care, it is a good idea to ask what can be done to facilitate better wound healing in the recovery process. These steps may include the use of non-steroidal anti-inflammatory drugs to reduce swelling and pain and regular cleaning and reapplication of the prescribed wound dressings.

Advanced Burn Wound Treatment

A common dressing for mild to moderate burn wounds would be a hydrocolloid dressing, a simple patch-type dressing with gel forming agents inside of a flexible water-resistant outer layer. These are effective, simple to apply, and require minimal maintenance, only needing to be changed every three to five days.

Hydrogel dressings are more commonly used for blistering wounds and consist of a hydrating polymer layer that both soothes pain and provides adequate moisture to facilitate healing. Hydrogel dressings require a loosely wrapped gauze layer to hold it in place.

In the case of third-degree burns, advanced wound treatment will be handled by your medical care provider unless directed otherwise, as treatment will likely involve extensive debriding (the removal of necrotic tissue), the use of skin grafts, and potentially physical therapy.

For second degree burns and beyond, medical treatment should always be sought for the best chances of the wound healing properly. If you put off treatment, this can lead to further complications, or the worsening of symptoms.

It should be noted that the wound dressings used in treating higher degree burns will be prescribed by your clinician and should be covered by your insurance. Minor wound care products will most likely not covered by insurance and can be purchased over-the-counter. If you have questions about the availability and coverage of products used in your burn wound treatment, contact Advanced Tissue or call 1-877-811-6080 for assistance.

Advanced Tissue is the nation’s leader in delivering specialized wound care supplies to patients, delivering to both homes and long-term care facilities.

Please note: blog posts are rarely updated after the original post. Because the medical industry is ever changing; please make certain to reference the current product list as well as up-to-date industry information when considering product selection or treatment. Always consult a physician to discuss specific concerns or questions related to your health.

How to clean a burn

The Spruce / Ulyana Verbytska

  • Working Time: 1 hr
  • Total Time: 1 hr, 30 mins
  • Skill Level: Intermediate

Gas stoves have some advantages over electric cooktops when it comes to cooking meals. Experienced cooks like the precise control offered by stoves with a gas range and some cooks refuse to cook with anything else. However, gas stoves can lose their effectiveness when the ports on their burners become clogged and interfere with the gas flow. A clogged gas burner will give off a weak flame or, in some cases, no flame at all if the burner is badly soiled. Fortunately, it’s fairly easy to clean gas burners.

How Gas Burners Work

The burners on your gas stovetop consist of a burner assembly attached to a small gas intake valve on the front or top of the stove, which is in turn connected to the main gas line. Turning the burner control knob opens the intake valve, allowing gas to flow through the venturi tube, a wide pipe that narrows in the center. The gas enters the venturi through one of the wide ends, increasing in pressure as it passes into the narrow section of the tube. As the gas passes back into the second wide section of the tube, the pressure lessens, drawing in air through a small hole in the bottom of the tube. The air mixes with the gas and flows into the burner.

The burner head itself is just a hollow metal disk with holes or slots in the outside edge. Many burners are designed with a metal or ceramic cap that sits atop the burner head and diffuses or directs the flames emerging from the burner head. A standing pilot light (on older stoves) or an electric spark pilot is located on one side of the burner, and it sends a small flame or spark to ignite the air-gas mixture as it flows through the holes in the burner. Adjusting the control knob on the stove governs the volume of the air-gas mixture, thereby controlling the intensity of the flame.

How Often to Clean Your Stove’s Gas Burners

A gas stove system is remarkably simple and trouble-free. In fact, difficulties arise only when the flow of gas becomes hindered, which is often caused by food residue that spills over the sides of pots and pans and clogs the ports around the burner heads. If left unattended, this food residue can become quite hard and difficult to remove. The best rule of thumb is to clean gas burners whenever the flame becomes irregular or exhibits a yellow color. Barring that, cleaning the burners once a month is probably sufficient. There is some variation in how manufacturers recommend cleaning the burner heads on a gas stove, but the following materials and steps will work for most stoves.

Medically reviewed by Last updated on March 4, 2021.

  • Overview
  • Aftercare Instructions
  • Ambulatory Care
  • Discharge Care
  • Inpatient Care
  • En Español


Examples of chemicals that can burn skin are found in cleaning products, paint stripper, and pesticides. Chemicals may also be found in some workplaces, such as wet or dry cement or battery acid. Signs and symptoms may not develop for several days. A burn may be worse than it appears at first. It may also get worse over the first few days.


Return to the emergency department if:

  • Your burn has more redness, pain, or swelling.
  • Your burn oozes yellow liquid that smells bad.
  • Your burned skin starts to tighten and restrict your movement.
  • Your burned skin changes color or a new wound develops.

Call your doctor or burn specialist if:

  • You have a fever.
  • You have less energy and feel ill.
  • You have blisters that rupture.
  • You have questions or concerns about your condition or care.


You may need any of the following:

  • Prescription pain medicine may be given. Ask your healthcare provider how to take this medicine safely. Some prescription pain medicines contain acetaminophen. Do not take other medicines that contain acetaminophen without talking to your healthcare provider. Too much acetaminophen may cause liver damage. Prescription pain medicine may cause constipation. Ask your healthcare provider how to prevent or treat constipation.
  • NSAIDs , such as ibuprofen, help decrease swelling, pain, and fever. NSAIDs can cause stomach bleeding or kidney problems in certain people. If you take blood thinner medicine, always ask your healthcare provider if NSAIDs are safe for you. Always read the medicine label and follow directions.
  • Acetaminophen decreases pain and fever. It is available without a doctor’s order. Ask how much to take and how often to take it. Follow directions. Read the labels of all other medicines you are using to see if they also contain acetaminophen, or ask your doctor or pharmacist. Acetaminophen can cause liver damage if not taken correctly. Do not use more than 4 grams (4,000 milligrams) total of acetaminophen in one day.
  • Antibiotics help fight or prevent an infection caused by bacteria.
  • Anti-itching medicine may help keep your burned skin from itching as it heals. It may be given as a pill or cream.
  • Take your medicine as directed. Contact your healthcare provider if you think your medicine is not helping or if you have side effects. Tell him of her if you are allergic to any medicine. Keep a list of the medicines, vitamins, and herbs you take. Include the amounts, and when and why you take them. Bring the list or the pill bottles to follow-up visits. Carry your medicine list with you in case of an emergency.

Early care of the burn area:

Your burn will be covered with a bandage to keep it moist and clean. The bandage absorbs fluid that drains from the wound and helps prevent infection. Change your bandage as often as directed, and if it becomes soaked with fluid from the wound. You may need to change the bandage 2 times each day to start, and then 1 time each week after that.

Later care of the burn area:

Do the following after healthy skin covers the burn area:

  • Apply a moisturizer such as aloe vera cream to the burn area. This can help keep the skin moist and reduce itching. Loose, soft clothing can also help relieve itching.
  • Do not expose your wound to direct sunlight. For at least 12 months, apply sunblock to your wound every time you go outside during the day. Use a sunblock with an SPF of 25 or higher.
  • Follow instructions to help reduce scarring. Scars can limit your movement.

Prevent chemical skin burns:

  • Store cleaning products out of the reach of children. Read the safety information on the labels of household cleaning products before you use them. Use child safety locks to keep children out of storage areas.
    How to clean a burn
  • Wear safety equipment when you use chemicals. Examples include gloves, protective clothing, and goggles. Read all labels before you use any chemical. Make sure you know how to use the chemicals correctly. Follow all safety rules in your workplace.

Follow up with your doctor or burn specialist in 1 day, or as directed:

You may need regular follow-up visits until your burn heals. Write down your questions so you remember to ask them during your visits.

The above information is an educational aid only. It is not intended as medical advice for individual conditions or treatments. Talk to your doctor, nurse or pharmacist before following any medical regimen to see if it is safe and effective for you.

Further information

Always consult your healthcare provider to ensure the information displayed on this page applies to your personal circumstances.

Make them look almost as good as new.

How to clean a burn

How to clean a burn

Chances are you have at least one blackened pot or pan in your cupboard. Thankfully, you don’t need special products to make your cookware look almost as good as new. Many stains can be removed using items you already have at home, says Miguel Hall, who works in Research and Development at Calphalon.

To get started, all you need are a few supplies:

Cleaning Burn Pots

How to clean a burn

How to clean a burn

How to clean a burn

How to clean a burn

How to remove burn marks from stainless steel surfaces

The best way to clean burn marks off both the interior and exterior of a stainless steel pan is to use warm water and soap, says Hall.

Particularly stubborn stains may need baking soda. Try this:

  • Start with a dry pan
  • Use a dry cloth to rub the baking soda into the marks
  • Rub the surface until you see the marks disappearing
  • Rinse off excess baking soda and dry. An abrasive cleaner like Barkeepers Friend can also be used in place of baking soda.

How to remove burn marks from nonstick surfaces

You should only use warm water, soap, and a sponge to remove spots from nonstick pans, says Hall. Abrasive cleaners and rough scrubbers may damage the nonstick coating. Sometimes, black marks appear on the exterior of your cookware. This is caused by the flame from a gas burner or food and oil spills, says Hall.

Try this if you have stubborn marks on the outside of your pan:

  • Cover the bottom of the pan with vinegar, then rub onto the exterior surface
  • Sprinkle with baking soda
  • Rinse the pan with water and let sit for several minutes
  • These two ingredients will react, causing marks to lessen, and possibly come off depending on the severity

How to clean a burn

Getting burns on your skin are not pleasing at all. Apart from the pain, a burn can disfigure your skin and give it a bad appearance. The wound from the burn on your skin can develop into a burn blister.

Burn blisters occur, when after the skin gets burnt, the upper layer if the skin detaches from the lower layer. Either friction or heat cause burn blisters. It is possible that some other skin conditions or other medical ailments can cause burn blisters too. Fluid is present in the space between skin layers, which leads to an edema.

Treating burn blisters are easier when they have not yet burst or when the fluid isn’t drained, because the layer of unbroken skin may help keep bacteria out of the skin. Nevertheless, burn blisters might eventually burst open. When a burn blister that has popped, burst or has torn open, it is messy, painful and needs even extra care to prevent the skin from getting an infection.

However, there are some easy things you can do to initially care for your burst blister that has popped open and treat it until it becomes better. You will learn how to treat a burn blister that has popped in this comprehensive article.

How to clean a burn

When it comes to treating a blister that has popped, it involves providing comfort and preventing infection while the blister heals.

Here are some simple tips for taking care of a burn blister that has popped open.

1. Wash your hands thoroughly before touching the burn blister

Getting an infection to your skin will come if you continually touch the burn blisters with your hands if it is not properly washed.

Use soap or disinfectant and warm water to wash your hands before touching the blister. Spend time washing your hands, don’t just wash for a few seconds.
Doing this will prevent the spread of germs, which could cause an infection in the skin.

2. Clean the burn blister with a mild soap

Wash the affected area thoroughly with mild soap and with cool water. Don’t scrub the blister, use a clean gauze to pat it dry. Scrubbing it will tear the skin further.
When cleaning the burst burn blister, avoid the use of alcohol, iodine, or hydrogen peroxide, because they all irritate the exposed skin.

3. Leave the skin to dry

After cleaning the burn blister with mild soap and water, allow the skin to dry for some few minutes.

4. Apply a skin ointment

Apply antibiotic or antiseptic skin ointment to the burn blister m. Use common ointments that contain include bacitracin, polymyxin B, or mixed antibiotic ointments and Betadine ointment.

Doing this will prevent the risk of getting infected.

5. Cover the burn blister with a clean bandage or gauze pad

Apply a sterilized and clean bandage over the blister. If you have smaller blisters, a simple bandage will do the trick. But for larger blisters, you may need to use a nonstick gauze pad fastened lightly with first aid tape. Make sure the tape of the bandage or adhesive surface does not come in contact with the blister.

6. Change the bandage daily

How to clean a burn

You should also change the bandage daily because it becomes wet or soiled from the fluid. Each time you finish changing the bandage, wash the affected area like I mentioned above and dried the area. Apply the antibiotic skin ointment to the skin again.
Replace with a new bandage on the blister until the skin has healed completely.

7. Remove the skin flaps

Skin flaps are dead layers of skin that a visible on the skin after an injury. You should cut the skin flaps with sterilized scissors when your skin has recovered.

8. Watch out for any infections and consult a doctor immediately

If you notice any skin infection symptoms, you should immediately visit a dermatologist for adequate help.

Thanks for reading. I’m sure you now know how to treat a burn after the blister has popped.

If you benefitted from this information and want to receive more helpful articles like these. Please sign up to our exclusive newsletters and receive useful health information directly to your mail box.

Type your email in the box below to begin.


I’ve had my egg about a year now and decided last night to do a ‘clean burn’. After pulling the black cod off I opened the bottom vent fully, took off the daisy wheel, and let ‘er go (checking the temp periodically). It only went to about 550 and after about 90 min the temp was falling. Now I haven’t fully inspected it yet, but a quick look at the woo, grid, and AR that were in it showed that there is still plenty of crud, soot, grease, etc on the parts and pieces.

Did I not have enough fuel in? After the cod I’d guess the firebox was about 1/3 – 1/2 full.


550 is not a clean burn. Sorry. You’ll need to go at least 650 for an hour. If you want a REAL clean burn, I mean the kind where the ceramics are near white again, then you’ll need to go 650 – 750 for a couple hours – with lump filled to near the top of the fire ring.

Be forewarned, if you decide to take your egg to these temps your gonna need to replace the gasket as it will melt. Tim

550 is not a clean burn. Sorry. You’ll need to go at least 650 for an hour. If you want a REAL clean burn, I mean the kind where the ceramics are near white again, then you’ll need to go 650 – 750 for a couple hours – with lump filled to near the top of the fire ring.

Be forewarned, if you decide to take your egg to these temps your gonna need to replace the gasket as it will melt. Tim

550 is not a clean burn. Sorry. You’ll need to go at least 650 for an hour. If you want a REAL clean burn, I mean the kind where the ceramics are near white again, then you’ll need to go 650 – 750 for a couple hours – with lump filled to near the top of the fire ring.

Be forewarned, if you decide to take your egg to these temps your gonna need to replace the gasket as it will melt. Tim

Don’t let unsightly scorch marks keep you from showing off your pretty pot.

Have you ever noticed unsightly brown burn marks creeping up from the underside of your tea kettle? You aren’t alone—and there are a few reasons why this happens. Specific substances, like anything containing sugar, can stick to the inside of your kettle even after a cleanse; when water bubbles over, it doesn’t just make a mess of your stovetop—it sticks to the underside of your pot. Add flame, and there you have it: burn marks. Other times, exposure to rapidly increasing temperatures (you crank the heat too fast!) or burned fats or oils (they can splatter onto your kettle if you leave it out while cooking) cause stubborn streaks. Thankfully, your pot isn’t ruined; you can get rid of most burn marks easily with the correct tools. Here’s how.

Why Pots, Pans, and Kettles Burn

Burns and scorch marks on the bottom of any piece of cookware are usually caused by oil, grease, or other fats that have burned and then adhered to the pan, notes Jenna Arkin, the Vice President of Innovation at ECOS. “Most cookware is made to resist heat and burning, but when oil is added, it can burn and stain surfaces,” she explains. Metal ions from hard water build-up might also be to blame. “If your home has hard water, this means that there are more hard metals, such as calcium and magnesium, in the water,” she adds. “Once water boils off, these metals can remain on the surface of cookware and cause staining.” This is especially true for the exterior of pots, pans, and kettles, when water bubbles over or is left on the surface before it is heated up.

Removing Marks

To clean burned, scorched, or stained pots, pans, and tea kettles, James Conner, the Vide President of Operations at Molly Maid, a Neighborly company, says you’ll need some gloves, vinegar, dishwasher detergent, dish soap, a towel or rag, a scrubbing brush or coarse sponge, and baking soda. “Safety first—put on some rubber gloves to keep your hands safe from grease and oil,” he says. Next, you’ll soak the dish in hot water with a few drops of detergent—and the hotter the water, the better (“Just be careful not to make the water so hot that you burn yourself,” he says). Soak your kettle for anywhere between 20 minutes and two hours, depending on the degree of the burn. Once you’ve soaked your pot, sprinkle it with baking soda and, using a wet, slightly abrasive sponge or brush with a few drops of dish soap, begin to scrub.

Stubborn Spots

If residue remains, you can repeat those steps until it comes off—or try covering the surface area with baking soda and pouring vinegar onto it. Conner says you’ll need to wait while this stain-fighting chemical reaction occurs, then wipe the concoction away with a soapy sponge to reveal the spot-free surface below.


The best way to prevent staining? Control the heat of your stove, explains Arkin. Don’t allow liquids to burn over while cooking—and be sure to quickly clean spills and messes that your kettle might come into contact with when it is on the stove. Better yet? Remove the kettle from the area entirely when frying or sautéing to reduce the amount of stain-causing substances your pot comes in contact with.

Gwen asked: “I placed a curling iron on a bathroom counter top and it burned the surface. The stain is unsightly. I have tried liquid cleaner with no positive results. I tried Ajax – no results. Does anyone have any idea?

Removing burn marks on countertops can tricky. Whether they are caused from a hot pan or a curling iron, the likelihood of removal all depends on the severity. There are several methods for removing light scorch marks, all using items that are readily available such as toothpaste or baking soda! If the scorch goes so deep that it penetrates the countertop material (rather than just discoloring the surface), it may be necessary to replace the countertop or find a clever way to cover it up.

Removing Burn Marks from Laminate Countertops

You Will Need:

  • White toothpaste
  • Soft Scrub with bleach
  • Soft cloth
  • Scrub brush or toothbrush
  • Water
  • Mild soap

Steps to Remove the Burn Mark:

  1. Begin by using the soft cloth and mild soap to remove any discoloration from the surface.
  2. Apply a layer of white toothpaste to the scorch mark and allow it to set for several minutes.
  3. Scrub the area lightly with either a scrub brush or toothbrush.
  4. Wipe the area clean with a soft cloth and water.
  5. If the stain remains, apply some Soft Scrub using the cloth and allow it to set for several minutes.
  6. Scrub the area with either a scrub brush or toothbrush.
  7. Repeat as necessary until the mark is removed.
  8. If the mark cannot be removed, it may have penetrated the surface, making it unable to be removed. Consider replacing the section or using one of our clever cover-ups below.

Removing Burn Marks from Solid Surface Countertops

You Will Need:

  • Fine-Grit sandpaper
  • Soft Brush
  • Cleaner for specific countertop type
  • Polish (optional)
  • Water

Steps to Remove the Burn Mark:

  1. Begin by cleaning the area with a cleaner designed for your specific type of countertop. Many companies offer special cleaners to remove burn marks and other stains. Doing this first allows for the maximum removal prior to removing any of the surface.
  2. Next, take the sandpaper and gently rub the stain away. This will remove a thin layer of the stone so proceed with caution. Only sand enough to remove the stain. Do not sand outside of the stain as this will also scratch the clean countertop and remove any sealer/finish.
  3. Clean the area again with the specified cleaner and polish as usual.

Removing Burn Marks from Porcelain Countertops

You Will Need:

  • Baking soda
  • Bar Keeper Friend (optional cleaner found at most department stores)
  • Soft cloth
  • Scrub brush or toothbrush
  • Water
  • Mild soap

Steps to Remove the Burn Mark:

*Porcelain countertops often have a polished finish that may become dulled using this process.

  1. Begin by using the soft cloth and mild soap to remove as much discoloration from the surface as possible.
  2. Mix the baking soda with water to create a paste.
  3. Apply a layer of the paste to the scorch mark and gently rub it in. It may also be helpful to allow it to set for a couple of minutes.
  4. Scrub the area lightly with either a soft cloth or toothbrush. The paste can be slightly abrasive, so don’t rub too hard to avoid damage to the finish on the sink.
  5. Wipe the area clean with a soft cloth and water.
  6. If the stain remains, apply the Bar Keepers Friend with a soft cloth and gently scrub the area.
  7. Repeat as necessary until the mark is removed.
  8. When the stain is gone, clean with water and mild soap as normal to remove any cleaning residue.

Clever Cover-Ups

If the scorch mark goes so deep that it cannot be removed, either replace the countertop or consider one of these clever options:

  • If the burnt countertop is in the kitchen, consider placing a permanent hot pad over the burnt spot. Take four tiles that coordinate with your countertop and use adhesive to make a square on top of the burn. Apply grout between them to create a perfect spot to set hot pots and pans. Chances are these hot pots and pans created the burn in the first place, so you can solve two problems at once!
  • If the burn mark is large (and on a kitchen countertop) make it your new work station and cover the area with a cutting board.
  • Decorative decals are available at many craft supply stores and can be easily attached with the adhesive backing.