How to fix your ipod jack

How To Replace The iPod Classic Headphone Jack

How to fix your ipod jack

The entire process of an iPod headphone jack repair looks like this:

  1. Take the plastic pry tools, insert them into the backplate and carefully slide them up and down to separate the faceplate from the backplate.
  2. Lift the hard drive carefully upward to unlatch the headphone jack cable from the logic board.
  3. Now that the headphone jack has been removed from the rest of the device, pry the battery away from the backplate. Be careful not to puncture the battery with your tool.
  4. Unscrew the 3 black screws and 1 silver screw from the inner frame and remove the headphone jack and hold switch from the backplate.
  5. Unscrew the single silver screw holding the plastic hold button from the headphone jack, then separate the hold switch from the metal plate. The old headphone jack and switch can be discarded.
  6. Attach the replacement switch to the plastic hold button, then insert it back into the inner backplate.
  7. Insert the replacement headphone jack into the bracket and screw the 3 black screws and 1 silver screw back into place.
  8. Place the battery back into the backplate, insert the cable back into the logic board, then close up the case. Don?t forget the hard drive insulators. You?re done!

Additional Notes:
Level of Difficulty: Easy
Parts Recommended: (1) iPod replacement headphone jack
Tools Recommended: (2) plastic pry tools [included] + (1) phillips head #00 screwdriver

Top Sellers

  • Free Repair Quote
  • Screen Replacement
  • Battery Replacement
  • Audio Jack Repair
  • Shipping Box & Label

Select Yours

  • Apple iPhone
    • iPhone 2G Parts
    • iPhone 2G Repair
    • iPhone 3G Parts
    • iPhone 3G Repair
    • iPhone 3GS Parts
    • iPhone 3GS Repair
    • iPhone 4 Parts
    • iPhone 4 Repair
    • iPhone 4S Parts
    • iPhone 4S Repair
    • iPhone Parts (All)
    • iPhone Repair (All)
  • Apple iPod
    • iPod Classic Parts
    • iPod Classic Repair
    • iPod Mini Parts
    • iPod Mini Repair
    • iPod Nano Parts
    • iPod Nano Repair
    • iPod Photo Parts
    • iPod Photo Repair
    • iPod Video Parts
    • iPod Video Repair
    • iPod Parts (All)
    • iPod Repair (All)
  • Apple iTouch
    • iPod Touch 1G Parts
    • iPod Touch 1G Repair
    • iPod Touch 2G Parts
    • iPod Touch 2G Repair
    • iPod Touch 3G Parts
    • iPod Touch 3G Repair
    • iPod Touch 4G Parts
    • iPod Touch 4G Repair
    • iPod Touch Parts (All)
    • iPod Touch Repair (All)
  • Apple iPad
    • iPad 1 Parts
    • iPad 1 Repair
    • iPad 2 Parts
    • iPad 2 Repair
    • iPad 3 Parts
    • iPad 3 Repair
    • iPad 4 Parts
    • iPad 4 Repair
    • iPad Mini Parts
    • iPad Mini Repair
    • iPad Parts (All)
    • iPad Repair (All)

Why Choose Us

The world without sounds is not good to live at all. Can you imagine a world wherein people don’t know how to talk? Dull, isn’t it?

Like in the real world, any portable media player without sound is boring. Imagine yourself watching a movie on your iPod touch without sound effects? Can you really feel the thrill of the movie? I don’t think so.

One of the most important parts of an iPod touch is the headphone jack. Headphone jack is the outlet wherein we insert our headphones at. Having a headphone jack is quite advantageous because you can listen to the music better.

Your iPod Touch can still blast your music and movies using the built-in speaker. However, it is really impractical to use the capacity of the built-in speakers if you are listening to music during your trips. When you are on the road, plugging your headphone on the iPod touch jack is really great thing to do.

What if the headphone jack becomes defective? Don’t worry because I will teach you strategies on how to fix iPod Touch headphone jack problem.

There are a couple of things I need you to do before replacing the headphone jack.

  • Please use another 3.5mm headphone and try inserting it at the ipod touch jack. It is not necessarily to buy new one as this one is just a testing. You can borrow from a friend or a family member.
  • If inserting another working headphone on your ipod touch’s jack doesn’t solve the problem, try the next solution.
  • Using your own headphone, adjust its fit like you have to wiggle it to the right and to the left. Listen if there will be any sound produced.
  • Make it sure that the volume is not muted.
  • Be sure that there are no residues that clog the headphone jack. For instance there is something that clog the jack, you need a Q tip and clean it.

Speaker splitter

Speaker splitter can be another option in mending your defective headphone jack. This only applicable for those headphone jacks that plays one side only. That is to say, the left speaker is producing sound while the right is not, vice versa.

Purchase a speaker splitter. You can visit nearby electric supply shops. If you don’t want to feel the heat of the sun, purchase it online at eBay, Amazon, or any other online retailers you know. Don’t worry, speaker splitters are very much affordable. It usually depends upon the brand. Amazon currently supplies the Belkin F8V234-WHT Speaker andHow to fix your ipod jack Headphone Splitter for $3.48. You need to make it sure that the size of the headphone is 3.55 mm to suit the jack of your iPod touch. Did you get it?

Install a New Headphone Jack

If the above options don’t solve your problem, I guess it’s time to replace your headphone jack. Installing headphone jacks wihtout ample technical knowledge is not recommended. If you dare take it without the proper experience, your precious iPod touch might get further destructions.

Visit Apple Inc.’s service center and ask the staff on how they can address your problem.

We have collected the most relevant information on The Audio Jack On My Ipod Touch Is Broken. Open the URLs, which are collected below, and you will find all the info you are interested in.

How to Fix Your iPod Jack: 7 Steps (with Pictures) – wikiHow

    https://www.wikihow.com/Fix-Your-iPod-Jack#:

How to Fix Your iPod Jack: 7 Steps (with Pictures) – …

    https://www.wikihow.com/Fix-Your-iPod-Jack
    Check to ensure that no lint or foreign material has collected in the audio jack, (which is quite common). If this is the case, remove it with the plastic part of a cotton bud. Take a small screwdriver (or something similar, like a rough …

how to fix an ipod touch headphone jack (without buying .

    If only one of your headphones don’t work then you don’t have to buy any thing to fix your ipod headphone jack. You just need a flathead screwdriver and .

Is my iPod touch 6 headphone jack broken? – Apple Community

    https://discussions.apple.com/thread/7641027
    Question: Q: Is my iPod touch 6 headphone jack broken? I bought my iPod months ago ..it’s a 6th gen .. 16gb bought from target.. (and for some reason the paint is chipping on the bottom ) Anyway last month my skull candy headphones werent working right in my iPod. The sound was all staticky and if I turned the wire the sound would go in and out .

iPod Headphone Jack Repair – Fixing your broken audio

    Professional repair centers can offer diagnostics on your iPod to determine the root cause of the audio problem. Repairing an iPod Headphone Jack varies from one iPod generation to the next. Each generation iPod model typically has its own specific headphone jack. Some of the newer models such as the iPod Touch require soldering to the logic board. The …

Now you know The Audio Jack On My Ipod Touch Is Broken

Now that you know The Audio Jack On My Ipod Touch Is Broken, we suggest that you familiarize yourself with information on similar questions.

Learn more about iPod service options, warranty, and pricing.

How do I get service for my iPod?

Apple offers many ways to get support and service for your iPod. Choose the one that’s best for you. Our support articles might answer your question. Or we can help you with batteries, cracked screens, and other issues.

Hardware service may no longer be available for older iPods. Contact your local provider to inquire about available service options.

Contact us

Contact us to get advice from an Apple Support expert. We’ll help you fix your issue or set up a repair. Before you contact us, be ready with your iPod’s serial number, your Apple ID and password.

Send it in

Contact us and we’ll give you shipping instructions. You can ship your iPod to us and we’ll service it as soon as possible. If you have an iPod shuffle, you can arrange for Apple to ship you a replacement before you return your original iPod shuffle to us.

Bring it in

To get help in person, bring your iPod to one of our Apple Authorized Service Providers or make an Apple Store appointment online.

If you have an iPod touch, be sure you know your Apple ID and password before your appointment.

How much will it cost?

There’s no charge if the issue is covered under warranty, AppleCare+, or consumer law. If your issue isn’t covered, the price depends on the type of repair. If we can’t repair your iPod, you might need to replace it.

How long will it take?

Repair source

Approximate time

3-5 business days

Bring to an Apple Authorized Service Provider

Ask your representative

Bring to an Apple Store

Up to 5 business days

Depending on where you get service, you might be able to check the status of your repair online.

Is your iPod covered by AppleCare+?

AppleCare+ gives you expert technical support and hardware coverage from Apple, including accidental damage protection. Each incident of accidental damage is subject to a service fee.

If you don’t have AppleCare+, you’ll pay the out-of-warranty fee for that type of repair.

Model Accidental damage (AppleCare+ fee)
iPod touch $ 29

Not sure if you’re covered? Check if you have AppleCare+ coverage by entering your iPod’s serial number.

Out-of-warranty service

Repairs are considered out of warranty when:

  • Your iPod is over one year old
  • Your iPod has an issue that’s not covered under warranty or consumer law, like accidental damage or damage caused by unauthorized modifications

We might be able to fix your iPod for an out-of-warranty fee. If we can’t fix it, you might have to replace it. Replacement equipment that Apple provides as part of the repair or replacement service may contain new or previously used Apple genuine parts that have been tested and pass Apple functional requirements. Contact your service representative for details. The Apple Limited Warranty is in addition to rights provided by consumer law.

Battery service

The Apple Limited Warranty covers a defective battery, but it doesn’t cover wear from normal use. We might need to test your iPod to find the cause of your battery issue.

If your battery has a manufacturing defect and it’s covered by our warranty, AppleCare+, or consumer law, we’ll replace it at no additional cost.

If you’re covered by AppleCare+ for your iPod touch and your battery can hold less than 80 percent of its original capacity, we’ll service it at no charge.

If your battery service isn’t covered by warranty, AppleCare+, or consumer law, we can service your iPod for a fee.

Screen repair

If your iPod screen is broken, we might be able to service it for an out-of-warranty fee. Accidental damage isn’t covered by Apple Warranty. The cost to repair an accidentally damaged screen depends on your iPod model, any additional damage, and if you have AppleCare+ coverage. If your screen cracks due to a defect, it’s covered by Apple warranty and consumer law.

AppleCare+ for iPod touch includes up to two instances of accidental damage, each with a service fee. You can use an instance for screen repair. If you don’t have AppleCare+, we might be able to repair your broken screen for an out-of-warranty fee.

We’ll run a diagnostic test to see if your iPod needs any other repairs. If it does, we’ll let you know.

Apple accessories

The Apple-branded accessories that come in the box with your iPod, including the power adapter, are covered by our warranty and consumer law. They’re also covered by AppleCare Protection Plan or AppleCare+. For service details, contact Apple or an Apple Authorized Service Provider.

Get ready for iPod service

  • Back up your iPod touch with your computer or use iCloud. You’ll need the backup to restore your content if we have to reset or replace your iPod touch.
  • Make sure you know your Apple ID and password.
  • Keep your cables and other accessories when you get service.

Apple Limited Warranty and proof of purchase

The Apple Limited Warranty covers your iPod and its accessories against manufacturing defects for one year from the date you bought your product. The Apple Limited Warranty is in addition to rights provided by consumer law.

Our warranty doesn’t cover damage caused by accidents or unauthorized modifications. See the warranty for complete details. You can check your coverage status online and update your proof-of-purchase information if there’s an error in our records. If our warranty, your AppleCare plan, or consumer law don’t cover your repair, you’ll pay out-of-warranty fees.

Consumer law

Your country or region might have consumer-protection laws for some repair issues.

Our guarantee after service

We guarantee our service, including replacement parts, for 90 days or the remaining term of your Apple warranty or AppleCare plan coverage, whichever is longer. We offer this whenever you get service from us or from an Apple Authorized Service Provider. This is in addition to rights provided by consumer law.

Problems with your iPhone headphones? It could be the headphone jack

How to fix your ipod jack

  • Tweet
  • Share
  • Email
  • Tweet
  • Share
  • Email

In This Article

Jump to a Section

If you’re not hearing music or phone calls through your headphones, you may be worried that your iPhone headphone jack is broken. Maybe it is. Audio not playing through the headphones is a sign of a potential hardware problem, but it’s not the only possible culprit.

Before heading to the Apple Store for a repair, try the following steps. They’ll help you figure out if your iPhone headphone jack is really broken or if there’s something else going on that you can fix yourself—for free.

While this article is about the iPhone headphone jack, many of these tips also apply to models that don’t have a headphone jack. So, even if your iPhone doesn’t have a headphone jack, if you’re having trouble with your headphones or audio output, this article may have the solution.

First, Try Other Headphones

The first thing to do when trying to fix a broken iPhone headphone jack is to confirm that the problem is with your headphone jack, not the headphones themselves. It would be better if it’s the headphones: it’s usually cheaper to replace headphones.

The easiest way to do this is to get another set of headphones—ones that you already know work properly—and plug them into your iPhone. Try listening to music, making calls, and using Siri (if the new headphones have a mic). If everything works properly, then the problem is with your headphones, not the jack.

If the problems still happen even with new headphones, confirm that the headphones work on another device and then move on to the next step.

Clean the Headphone Jack

Many people keep their iPhones in their pockets, which are full of lint that can find its way into the headphone jack (or the Lightning port, on models that don’t have a headphone jack). If enough lint or other gunk builds up, it can block the connection between the headphones and the jack. If you suspect lint or other build-up is your problem:

  • Look into the headphone jack to check for lint. You may need to shine a light into the jack to get a good look.
  • If you see lint, blow into the headphone jack or shoot some compressed air into it (compressed air is better since it doesn’t have the moisture that’s present in breath, but not everyone has it handy). This may be enough to remove anything that’s built up in the jack.
  • If the lint is packed tightly and can’t be blown out, try a cotton swab. Remove most of the cotton from one end of the swab. Put a tiny bit of rubbing alcohol on the end you removed the cotton from. Then insert that end into the headphone jack. Move it around gently and try to pull out the lint.
  • If that didn’t work, or you don’t have a cotton swab, flatten out a paperclip. Wrap some tape around one end, being careful to not wrap so much that it’s larger than the headphone jack. Insert the tape end into the headphone jack and twist it a couple of times. Gently pull it out, dispose of any debris, and repeat as necessary.

While you’re cleaning, clean your headphones, too. Periodic cleaning will increase their life expectancy and ensure they don’t carry harmful bacteria that could irritate your ears.

How to fix your ipod jack

Restart Your iPhone

It might not seem related to problems with the headphone jack but restarting the iPhone is often a key step in solving problems. That’s because a restart clears the iPhone’s active memory (but not its permanent storage, like your data; that won’t be touched), which could be the source of the problem. And since it’s easy and quick, there’s no real downside.

How you restart your iPhone depends on the model, but some general guidelines are:

Hold down the Power button and one of the Volume buttons (for the iPhone 7, it needs to be the Volume down button).

On an iPhone 6 or older, just hold down the Power button.

Move the slider button from left to right.

Wait for your iPhone to fully power down.

Press and hold the Power button until you see the Apple logo.

If holding down just the on/off button doesn’t restart the phone, try a hard reset. How you do this depends on what model iPhone you have. If you’re still not able to hear audio, move on to the next item.

Check Your AirPlay Output

One reason that you might not hear audio through your headphones is that your iPhone is sending the audio to another output. The iPhone is supposed to automatically recognize when headphones are plugged in and switch audio to them, but it’s possible that hasn’t happened in your case. One potential cause is that audio is being sent to an AirPlay-compatible speaker or AirPods. To check for that:

Swipe up from the bottom of the iPhone’s screen to open Control Center (on the iPhone X and newer, swipe down from the top right).

Tap AirPlay in the top right of Control Center to reveal all available output sources.

Tap Headphones (or iPhone, whichever option is present).

How to fix your ipod jack

Tap the screen or press the Home button to dismiss Control Center.

With those settings changed, your iPhone’s audio is now being sent to the headphones or the iPhone’s built-in speakers. If that doesn’t solve the problem, there’s another, similar setting to investigate.

Check Bluetooth Output

Just like audio can be sent to other devices over AirPlay, the same thing can happen over Bluetooth. If you’ve connected your iPhone to a Bluetooth device like a speaker, it’s possible the audio is still going there. The simplest way to test this is to:

Open ​Control Center.

Tap the Bluetooth icon in the top-left group of icons so that it’s not lit up. This disconnects Bluetooth devices from your iPhone.

How to fix your ipod jack

Try your headphones now. With Bluetooth off, the audio should play through your headphones and not any other device.

Your Headphone Jack is Broken. What Should You Do?

If you’ve tried all of these options and your headphones still aren’t working, your headphone jack is probably broken and needs to be repaired.

If you’re very handy, you can probably do this yourself—but we wouldn’t recommend it. The iPhone is a complex and delicate device, which makes it hard for regular people to repair. Plus, if your iPhone is still under warranty, fixing it yourself voids the warranty, which means Apple won’t help you fix problems you cause.

Your best bet is to take it to the Apple Store for a fix. Begin by checking your iPhone’s warranty status so you know if a repair is covered. Then, set up a Genius Bar appointment to get it fixed. Of course, there’s always the choice of upgrading to the latest iPhone and leaving the world of wired headphones behind. Good luck!

We have collected the most relevant information on Ipod Touch Audio Port Broken. Open the URLs, which are collected below, and you will find all the info you are interested in.

How to Fix Your iPod Jack: 7 Steps (with Pictures) – wikiHow

    https://www.wikihow.com/Fix-Your-iPod-Jack#:

Broken USB port on iPod Touch – Apple Community

    https://discussions.apple.com/thread/3134506
    First, check the port with a magnifying glass to see if there is some dirt/lint blocking good contact. Perhaps cleaning the connection will solve your problem. Reply Helpful camswe Level 1 (0 points) Jul 30, 2011 3:40 AM in response to Community User

How to Fix Your iPod Jack: 7 Steps (with Pictures) – …

    https://www.wikihow.com/Fix-Your-iPod-Jack
    Check to ensure that no lint or foreign material has collected in the audio jack, (which is quite common). If this is the case, remove it with the plastic part of a cotton bud. Take a small screwdriver (or something similar, like a rough …

iPod Repair – Official Apple Support

    https://support.apple.com/ipod/repair/service
    AppleCare+ for iPod touch includes up to two instances of accidental damage, each with a service fee. You can use an instance for screen repair. If you don’t have AppleCare+, we might be able to repair your broken screen for an out-of-warranty fee. We’ll run a diagnostic test to see if your iPod needs any other repairs.

how to fix an ipod touch headphone jack (without buying .

    If only one of your headphones don’t work then you don’t have to buy any thing to fix your ipod headphone jack. You just need a flathead screwdriver and .

в€љ How to Fix And Repair Broken iPod? – AppleRepo.com

    Broken iPod could be caused by Water damage by accident, the screen blacked out, your ipod break out because of it fallen from your hand, the song stopped working from your iPod and you do not know why?? So many reasons which could break your iPod. And The worst thing is if your broken ipod is out of warranty, you will pay some expensive dollar to repair your damage ipod.

iPod Logic Board Replacement Kits & Services – iRepair

    https://www.irepair.com/ipod-logic-board.php
    iPod Logic Board Replacement. Broken iPod logic board troubles can produce various signs, including: no sound from the headphone jack or bottom port, iPod dead completely, or a refusal to charge. We fix iPod logic board problems of all types and offer two flexible options: Self-Service (You Fix) and Full-Service (We Fix).

iPod Parts – iDemiGods

    https://www.idemigods.com/Apple_iPod_Parts_s/77.htm
    iPod Parts. A wide selection of Apple iPod repair parts are available for purchase from iDemiGods. We stock and maintain a very large inventory of Apple iPod parts in the North America. Apple iPod repair parts are available for all models and sizes. iDemiGods is here to help repair broken Apple iPod products.

Solved! – Broken ipod touch | Tom’s Guide Forum

    https://forums.tomsguide.com/threads/broken-ipod-touch.237438/
    Ok well recently i dropped and cracked my ipod touch 2nd generation. Only the glass was broken so i thought hey why dont i go get the glass solution that people use to fix windows. well it sealed part of the crack but now more is cracking down the whole ipod..

Why does the new iPod touch have a headphone jack .

    https://www.techradar.com/news/why-does-the-new-ipod-touch-have-a-headphone-jack
    The new iPod’s small size also makes it ideal for watching downloaded content on the go, while support for FaceTime means kids can keep in touch with family members and friends over a Wi-Fi .

iPod Touch 4th Gen Dock Charge / Sync Port Replacement .

    If your iPod Touch 4th Generation won’t charge properly, you may need this replacement docking port. Or, if a computer or docking device isn’t detecting your iPod, this docking port can often resolve the issue. Bent or broken pins within the dock port can interfere with charging, docking, and connecting to a computer.

Now you know Ipod Touch Audio Port Broken

Now that you know Ipod Touch Audio Port Broken, we suggest that you familiarize yourself with information on similar questions.

Here are a few quick and easy fixes for when your headphones stubbornly keep falling out of the audio jack.

It can be the most annoying thing to plug in your headphones only to find out that the headphone jack is loose and not working.

Most of us are used to things working as advertised. And so if we realize that the headphones won’t go into the jack, it can become a major inconvenience. It’s not always possible to use your speakers instead, especially if you’re out in public.

But don’t fret. You don’t have to go to the repair center right away. There are several things you can do to learn how to fix a loose headphone jack.

For best results, we recommend that you start with simple, non-invasive solutions with minimal risk of damaging your device.

In This Article

  1. What’s Causing the Loose Headphone Jack?
  2. How to Fix a Loose Headphone Jack
  3. Conclusion

What’s Causing the Loose Headphone Jack?

Before you fix any problem, it’s essential that you find out what’s causing it in the first place.

This lets you pick the most appropriate solution so you don’t have to opt for harder fixes that may damage your device.

A loose headphone jack may cause different problems. One of which is when the headphone plug falls out constantly from the port. It may also cause hearing static on your headphones, as well as stereo problems.

Learn more about headphone jacks and plugs to help you understand the problem better.

The following are quick and simple ways to diagnose a loose aux jack.

Plug the headphones into another device

The first test is to insert the headphones into a different jack. If the plug still will not fit, then you don’t have a problem with the headphone jack. You have a problem with your headphones. In this case, you may want to think of getting a new pair of headphones.

Check for size differences

Factory defects and wear and tear caused by extended use can also cause unnoticeable size changes that affect how the plug fits inside the jack. It’s also possible that the audio jack itself has some damage because of misuse.

Check for dust or debris

Dust, dirt, or even lint collecting inside the headphone jack can prevent the plug from clicking in. Get a flashlight and shine it into the jack to make sure it’s free from clogged up debris.

Inspect for signs of corrosion

Corrosion of the headphone plug or jack can also cause size changes. Corrosion happens because of exposure to moisture. If the plug or jack shows some rust or discoloration, it’s likely corroded. If that’s the case, it may be time to get new headphones or give the headphone jack a good cleaning.

Make sure the device’s case isn’t getting in the way

Some phone cases are too thick or do not fit snugly with the phone model. This prevents the headphone plug from being inserted fully in the port. To see if this is the problem, try removing the phone case before placing the headphone plug.

See if the headphone plug is still straight

A slight bend can cause your plug to not fit well inside the jack. If that’s the case, check out our separate guide on how to fix a bent headphone plug.

How to Fix a Loose Headphone Jack

Now that you know why your phone or PC’s headphone jack is loose, it’s time to fix it.

There are three things you can do to keep the audio plug from falling out. You can:

Clean the headphone jack

If you peered into the jack and found debris, it’s a good sign. It means you may not have to repair or replace the jack at all. You simply need to clean it.

How to remove debris in the headphone jack

  1. Flatten out a paper clip.
  2. Wrap the edge of the paper clip with double-sided tape.
  3. Carefully insert the sticky end into the headphone jack.
  4. Press the paper clip tightly to the bottom of the jack and twist. This will get the debris to stick to the tape.
  5. Repeat the steps, checking regularly into the jack to make sure no debris is left.
  6. Clean the jack with a Q-tip and alcohol.

If it doesn’t work:

  • Use a toothpick instead of a paper clip.
  • If you have a 1/16-inch drill bit, you can use that too. The shape of the drill bit can make it easier to pick up the debris than a toothpick or a paper clip.

For other tips, check out our guide on how to clean your headphone jack.

How to remove corrosion in a headphone jack

  1. Get yourself an interdental toothbrush, the kind that is used by people wearing braces to clean hard-to-reach parts of their teeth. You can easily find an interdental brush at any grocery store.
  2. Dip the brush in 70% isopropyl alcohol. Tap the brush so that it’s moist but not soaking wet.
  3. Insert the brush into the headphone jack with your device turned off. Move the brush up, down, and in circles. You have to do this a few times to make sure the jack is thoroughly clean.

Adjust the headphone pin

  1. Cut a thin strip of aluminum.
  2. Wrap it around the base of the headphone plug until it’s thick enough to make it fit into the audio jack.

Repair the headphone jack

If none of these DIY fixes work for you, you may have to open the device and make more invasive repairs.

Keep in mind that opening your device could void your warranty and may even cause irreparable damage if you didn’t do the repair correctly. It can also cause additional issues like short circuits in the headphone wires if not done properly.

It’s always best to take advantage of the warranty and get your device repaired by authorized professionals.

But if you insist on repairing the jack yourself, make sure you’re absolutely confident in your DIY skills. Only you are accountable for any damage that may be caused by repairing the device yourself.

If the warranty for your device has expired and you need to save the money you’d have to spend at a repair center, this may be the only option for you.

The following videos provide clear step-by-step instructions for fixing your headphone plug or jack:

Conclusion

Just like when fixing the headphone wires, fixing a loose headphone jack only involves a quick, simple fix that doesn’t risk damaging your device. In case you need to open your device, you need to make sure you’re fully aware of the risks involved.

The methods we shared above are useful if you need to use your headphones right away so you can stay focused on work and prevent distractions while listening to high-quality music or podcasts that you love.

If you find other issues, feel free to read through our ultimate guide on how to fix your broken headphones.

Have we helped you fix your loose headphone jack? What particular method helped you? Have you found another method that works? Let us know in the comments below.

Reliable Headphone Jack Repairs from Square Repair

30 Minute Repairs | Walk-in or drop off | Guarantees / Warranties | Central London location

How to fix your ipod jack

A broken or faulty headphone jack can cause a lot of problems for your Apple device. There are numerous sound issues that can be caused if the headphone jack of your iPhone or iPod isn’t functioning as it should; however, Square Repair is here to help you.

“There can be various issues as to why your headphone jack is faulty. It can be caused by water damage or a build-up of dust.”

Square Repair is fully-qualified to correctly carry out the necessary repairs to your iPhone or iPod device without causing further damage to it. Book an appointment with us today .

For the last seven years, Square Repair has helped repair over 70,000 devices right from our London Liverpool Street Station branch. We’re highly experienced and qualified to carry out repairs for your iPod and iPhone device. Find out more about our guarantees.

What can I do to fix my iPod or iPhone Headphone Jack?

There a few quick fixes we recommend that you can try out before visiting us. Sound issues can be caused by a few things. You could try to:

  • Check for any sort of debris or damage in and around the headphone jack. Carefully check the headphone jack of your iPhone or iPod and gently brush it clean.
  • Check the current condition of your headphones. If you can, try using another pair of working headphones and see if the problems continue or are fixed.

At Square Repair, we take great pride in fixing your iPod or iPhone device. Our passionate team enjoy carrying out dependable repairs for your device. Find out more about us.

From our London Liverpool Street station branch, we’ve helped countless people. We’re proud of the reviews that they’ve left us , and it’s why we continue carrying out our repairs with only high-quality, long-lasting parts.

For further questions about our iPod and iPhone headphone jack or any other repairs, contact us today.

LOGIN REGISTER ADVERTISE

How to fix your iPod

Related Articles

We’ll be showing you how to fix an earphone plug, and then replace an iPod Video earphone jack and battery (but it should work for most of the other iPods too).

You can get a matching plug from any electronics store. An earphone jack and battery will set you back about R600 for both, still cheaper than buying a new one.

To find the replacement part you’re looking for have a look at either www.ifixipods.co.za or www.igear.co.za. For the less adventurous both sites offer a repair service if you’re willing to mail your iPod to far far away for a couple of days.

You’ll need the following

• A blunt knife or plastic object to pry the case open.
• A small screw driver set, pliers and a tweezer.
• A soldering iron and small blade.

Fixing the earphone plug

We’ll be fixing the earphones first. Determine where your cable is broken by playing some music and jiggling the cable at different locations until you hear the music playing, cut the cable at about an inch away from this spot up the cable.

Stripping a centimeter of plastic from the cord will expose two really tiny wires, these are normally enamel coated. Solder one wire to each of the earphone plug connectors, you might need a bit of heat to get through the enamel coating so be patient, cramp the plug around the cable and close it up.

Opening the iPod

To open your iPod insert the knife between the top and bottom covers starting at the lower corners, work your way up wedging the two apart. Be carefull not to let the knife extend too far into the device or hurt your casing. Congratulations on now voiding your warranty. Carefully take the covers apart noting that two wires hold them together, use the tweezer to disconnect the latches holding the wires in place on the main board. You can now completely detach the back cover.

Pry the battery off with the knife being careful not to damage the ribbon cable attaching the earphone plug. Unscrew the old earphone jack and replace it with the new one, replace the battery and make sure the glue strip is holding it in place.

Closing everything up is a bit tricky, the ribbon connectors on the main board have a little brown latch that you need to open, insert the cables and push the hinges shut ensuring that they’re making contact by pulling on the cables slightly.

Close the covers by snapping them into place and you’re ready to go. [MS]

The first thing that you will need is a cable. One end of the cable has a 3.5 mm headphone jack. This looks exactly like the socket on the end of your Apple headphones. The other end of the table has 2 RCA connectors. These will plug straight into your stereo. The cable looks like this:

How to fix your ipod jack

You will need a cable like this, one end has a headphone jack to plug into your iPhone, the other end has two RCA connectors to plug straight into your stereo.

These cables start as cheaply as 1c (e.g. here) but I’d steer away from one like that which uses cheap cable. Pretty much anyone can tell the difference in the sound on one of these cheap cables even if you don’t know much about music at all. The difference between a mid-range cable and a high end cable is less noticeable unless you have a good ear and a good stereo. I use one like this which costs about $25, but you can buy one somewhere in the middle range for around $10 like this or this and it should be fine. I find Belkin to be pretty reliable. Steer away from anything on ebay that looks like this:

How to fix your ipod jack

Stay away from cheap cables that look like this.

I’ve written an article about finding the best cable here.

You can plug the 3.5mm straight into your iPod headphone jack, and the other end will plug into your stereo. This is not the best solution (read on further down in this article) but it works.

For best results set your iPhone volume to about half. If it’s too quiet you may get some noise and hiss. If it’s too loud you may get some distortion.

When plugging into the back of the Stereo Amplifier, the normal input to use would be the AUX-IN, but you can use almost whatever input you want: CD-INPUT, TAPE-IN, TV-IN, DVD-IN or the AUX-IN.

Do not use the PHONO-IN as it is designed specifically for a record player and won’t sound as good.

How to fix your ipod jack

On this Pioneer receiver the AUX IN is called ‘ANALOG AUX’. This is where you’d plug in your iPod dock.

When you plug your iPhone directly into your stereo as I’ve described above there will be a very slight loss of audio quality. This is because the headphone jack is designed to power headphones, not be plugged into a stereo. (You can read about the technical differences here.) For most people this will probably not be noticeable, so unless you have a really good stereo with a nice set of speakers the straight cable will work fine.

If however you are after the best possible audio quality into your stereo, equivalent to or better than a CD player, then can buy a “dock” for your iPhone.

Apple sell iPod and iPhone docks for the new lightning connecto here, but for older iPods that don’t have a lightning connector, Apple don’t sell this product any more. Even their own support article here (dated Feb ’15) now tells you to plug the iPod straight into your home stereo from the headphone jack. (This will work, but it is definitely an inferior sound quality to the dock.)

So, for the best sound quality, you need to track down a 2nd hand iPod or iPhone dock that will suit your iPhone or iPod.

In ebay you will need to search for something like this:

“Apple Universal Dock genuine”

“Apple Dock MA045”

“Apple Dock MC746LL”

“Apple Dock A1371”

Or they are still available on Amazon here, here and here.

How to fix your ipod jack

This is an Apple iPod dock. It has a ‘line out’ output on the back. (The jack on the left in the above picture). Using a line level out will give you the best possible sound quality, better than just using the headphone socket. This is because the line out has been designed to put out a signal that is perfectly matched to a home stereo that has a ‘line in’.

The headphone output on the iPod is not a true ‘line out’, it is a headphone level. This is different. A headphone output is expecting a pair of headphones and while it will still work fine, you may lose some high-end or low end or clarity using it as a line out instead of a headphone out. The dock gives you a proper ‘line out’ which will be the exact voltage and impedance to match the ‘line in’ on your stereo. This is important for the best sound quality.

Use exactly the same cable that I talked about above. The headphone jack and plugs into the ‘line out’ from the dock, and the RCA connectors plug into the back of your stereo.

There are other advantages to the dock. The first one is obviously the better audio quality. But you can also leave the audio lead and charger cable plugged into the dock permanently, so that whenever your phone or iPod is plugged into the dock it will be charging at the same time that it is playing. The Apple iPod dock also has an infrared receiver on the front which will allow you to control your iPod via any Apple remote control! so you can play and pause your iPod using the Apple remote control.

Note that the newest iPhone docks (iPhone 6 and newer) do not have a ‘line out.’ The first generation of lightning dock did have a ‘line out’.

How to fix your ipod jack

The first generation of lightning dock with a true ‘line out’.

How to fix your ipod jack

The newer iPhone dock with output is marked as a headphones not ‘line out’.

There is a lot of confusion on the Apple support sites as to whether this socket marked headphones is actually a true high-quality ‘line out’ or whether it is just the same as what a headphone socket would output.

Here is one of the comments on the apple support site:

“Apple Documentation says that it has both Headphone & Line Level output BUT I am unable to achieve this. Apple support could not help find out how to accomplish this and simply stated that the documentation “must be incorrect.”

So if you wish to have true Line Level Output like the previous 5s dock, DO NOT BUY THIS PRODUCT until Apple confirms otherwise, or at least explains how to use this product.”

It sounds like if you have a new lighting iPhone you may be just as well off buying the Apple lightning to headphone connector rather than the dock. I have not been able to confirm whether the new iPhone dock is a true line out or not.

If you are buying a new stereo, Pioneer and others are now including AIRPLAY into some of their amplifiers. The amplifiers have a Wi-Fi receiver built in which means you can play from your iOS device over your Wi-Fi (Airport) network directly to your Stereo with no loss of quality. You don’t need to connect any cables. This article has more information about how to connect your iPod or phone wirelessly.

Get help when you can’t hear sound from your headphones, the sound is muffled, or your microphone doesn’t work.

Check for debris, damage, or loose connections

  1. Check for debris in the headphone port on your iPhone, iPad or iPod touch.
  2. Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage.
  3. Look for debris on the meshes in each earbud. To remove debris, gently brush all openings with a small, soft-bristled brush that’s clean and dry.
  4. Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.

If your headphones still aren’t working, follow the steps below for your issue.

How to fix your ipod jack

If you can’t hear any sound or if only one side of your headphones works

  1. Adjust the volume with the volume buttons on your iOS device or use the Volume slider in Control Center on your iPhone or iPad.
  2. To see if you need a replacement, try a second pair of headphones. If the second pair works, contact the manufacturer of the initial pair and ask if you need a replacement. If the second pair doesn’t work, contact Apple Support.

How to fix your ipod jack

If your microphone doesn’t work

  1. Make sure that your headphones have a built-in microphone.
  2. Check your microphone for blockage, like debris, lint, or plastic packaging.
  3. To see if you need a replacement, try a second pair of headphones. If the second pair works, contact the manufacturer of the initial pair and ask if you need a replacement. If the second pair doesn’t work, contact Apple Support.

How to fix your ipod jack

Still need help?

If your headphones still aren’t working, contact Apple Support.

by Jenefey Aaron Updated on 2021-09-24 / Update for iPhone Fix

Have you ever met the same issue mentioned below? Your iPhone 13/12/11/X/8/7/6s/6/5 not detecting headphones and the symptoms are extremely wired. You are going to adjust the volume level but “ringer (headphones)” pops up on your screen, and the sound can’t work through the normal speaker output.

Some iPhone users think it as their iPhone speakers suddenly not working or that something goes wrong. But that is actually pretty rare. Probably your iPhone gets stuck in headphone mode. You can usually fix the issue really quickly without anything but to do following the next ways. Here is how to fix iPhone 13/12/11/X/8/7/6s/6/5 headphone jack not working.

Try those ways first to fix iPhone headphone jack not working

Before we take steps to fix the headphones not working issue as a software glitch, please have a routine examination and do following several things.

  • Make sure that nothing is covering the headset microphone.
  • Make sure that the headphone has a built-in microphone.
  • Unplug the headset from iPhone and cleanup any crud from the headset jack. Later plug it back in.
  • Make sure the headphone is plugged in right way. If you are using a case, remove it to make sure it’s not getting in the way.
  • Try to use another headphone. If the issue also happens with the other headset, you are supposed to ask help for Apple Store. If the other headset works normally, you have to change new one.
  • Try to adjust the volume on your iPhone using the volume buttons and the Volume slider in Control Center.

Repair iPhone System to Fix iPhone Headphones Jack Not Working

If the headphones still not be detected, it could be a software malfunction of iOS, like iPhone stuck in headphones mode. I sincerely recommend Tenorshare ReiBoot for you to get your iPhone out of headphone mode to fix headphone not working issue. This iPhone repair software empowers you to fix 50+ iOS system issues without data loss, inclulding iPhone headphones mode, iPhone recovery mode loop, iPhone stuck on Apple logo, black screen, etc.

Download and install ReiBoot free, let’s see how to fix iPhone headphones not detected issue.

How to fix your ipod jack How to fix your ipod jack

  • Launch ReiBoot and connect your iPhone/iPad to computer. Choose “Repair Operating System” feature.

How to fix your ipod jack

Click Start Repair and you’ll enter the firmware package download interface. Before system recovery, you’ll need to download the latest iOS firmware file.

How to fix your ipod jack

Click Start Repair after the firmware is downloaded successfully. ReiBoot will get started repairing iOS system.

How to fix your ipod jack

After system recovery, your iPhone 13/12/11/X/8/7/6s/6/5 will be restarted. You can plug in headphones and iPhone will recognize the headphones now.

How to fix your ipod jack How to fix your ipod jack

Updated on 2021-09-24 / Update for iPhone Fix

  • » Opinions and Analysis on iPhone models –
  • iPhone 4 – background
  • iPhone 3GS – background
  • iPhone 3G – background
  • iPhone 2G – the original, background

    iPod Touch 1st, 2nd, 3rd or 4th Gen headphone jack replacement

    Apple has engineered several of their iPod models with the express intent that they never be repaired. When you open them up parts that could easily be damaged (and therefore compel additional repair) are high temperature soldered down to deliberately make a simple repair impossible. The iPod Touch and iPod Nano models are built with the intent that the battery, and the headphone jack will not be replaced.

    So it has to be a real point of consternation to Apple that there are clever people like me who have the soldering skills to work around their obstacles and take care of these things.

    I know about this problem and I’ve fixed it many times. It is from having the earbuds plugged into the headphone jack, dropping it and having it land on the earplug. This drives the plug far enough into the jack that it permanently destroys the right side hearing’s positive connection so you can hear the left side only. At times when you wiggle the earbud plug you may seem to get hearing from both sides. What is actually happening is the plug is cross connecting the the left side to both the left and right side hearing producing mono left side in both earbuds.

    Pricing for that repair on each model can be found in the graphics below. Look up the cost relative to your model.

    How to fix your ipod jack
    How to fix your ipod jack
    How to fix your ipod jack
    How to fix your ipod jack

    The complexity of the repair stems from how the jack is fastened to the logic board of the Touch. Apple has FoxConn (the sub-contractor that actually manufactures the iPods, iPhones and laptops) use a high temperature solder and basically “flash welds” the headphone jack in place. The high temperature de-soldering and soldering in of the new part is tricky, but I am passionate about getting peoples iPods working again so they don’t have to buy a new one.

    These are comments people have sent me after they received their iPod back fixed.
    http://www.isickbay.com/comments/comments.shtml

    Here is an interesting case that shows the degree of intensity I exhibit at my work on hard drive based iPods
    http://www.isickbay.com/call–1-877-IPOD-PRO/recent_fixes/recent_fixes_13.shtml

    email me at [email protected] with questions or to set up a repair.

    Monday through Friday from 10am to 7pm, and Saturday & Sunday noon to 6pm.

    I’m in Sonoma County. Northern California wine country,


      Frank Walburg
      Service Court
      Santa Rosa, Ca 95403-3139

    Find out more about iPod service options, warranty and pricing.

    How do I get service for my iPod?

    Apple offers many ways to get support and service for your iPod. Choose the one that’s best for you. Our support articles may answer your question. Or we can help you with batteries, cracked screens and other issues.

    Contact us

    Contact us to get advice from an Apple Support expert. We’ll help you fix your issue or set up a repair. Before you contact us, be ready with your iPod’s serial number, your Apple ID and password.

    Send it in

    Contact us and we’ll send you a box for your iPod. You can send your iPod to us and we’ll repair or replace it as soon as possible. If you have an iPod shuffle or iPod nano, you can arrange for Apple to send you a replacement before you return your original product to us.

    Bring it in

    To get help in person, bring your iPod to one of our Apple Authorised Service Providers or make an Apple Store appointment online.

    If you have an iPod touch, make sure you know your Apple ID and password before your appointment.

    How much will it cost?

    There’s no charge if the issue is covered under warranty, AppleCare+ or consumer law. If your issue isn’t covered, the price depends on the type of repair. If we can’t repair your iPod, you may need to replace it.

    How long will it take?

    Repair source

    Approximate time

    3-5 business days

    Take to an Apple Authorised Service Provider

    Ask your representative

    Take to an Apple Store

    up to 5 business days

    Depending on where you get service, you may be able to check the status of your repair online.

    Is your iPod covered by AppleCare+?

    AppleCare+ gives you expert technical support and hardware cover from Apple, including accidental damage protection. Each incident of accidental damage is subject to an excess fee.

    If you don’t have AppleCare+, you’ll pay the out-of-warranty fee for that type of repair.

    Model Accidental damage (AppleCare+ fee)
    iPod touch £ 25

    Not sure if you’re covered? Check whether you have AppleCare+ cover by entering your iPod’s serial number.

    Out-of-warranty service

    Repairs are considered out of warranty when:

    • Your iPod is over one year old
    • Your iPod has an issue that’s not covered under warranty or consumer law, such as accidental damage or damage caused by unauthorised modifications

    We may be able to fix your iPod for an out-of-warranty fee. If we can’t fix it, you may have to replace it. Replacement equipment that Apple provides as a part of the repair or replacement service may contain new or previously used Apple genuine parts that have been tested and pass Apple functional requirements. Contact your service representative for details. The Apple Limited Warranty is in addition to rights provided by consumer law.

    Battery service

    The Apple Limited Warranty covers a defective battery, but it doesn’t cover wear from normal use. We may need to test your iPod to find the cause of your battery issue.

    If your battery has a manufacturing defect and it’s covered by our warranty, AppleCare+ or consumer law, we’ll replace it at no additional cost.

    If you’re covered by AppleCare+ for your iPod touch and your battery can hold less than 80 percent of its original capacity, we’ll service it at no charge.

    If your battery service isn’t covered by warranty, AppleCare+ or consumer law, we can repair or replace your iPod for a fee.

    Screen repair

    If your iPod screen is broken, we may be able to service it for an out-of-warranty fee. Accidental damage isn’t covered by the Apple Warranty. The cost to repair an accidentally damaged screen depends on your iPod model, any additional damage and if you have AppleCare+ cover. If your screen cracks due to a defect, it’s covered by Apple warranty and consumer law.

    AppleCare+ for iPod touch includes up to two instances of accidental damage, each with a service fee. You can use an instance for screen repair. If you don’t have AppleCare+, you can repair your broken screen for an out-of-warranty fee.

    We’ll run a diagnostic test to see if your iPod needs any other repairs. If it does, we’ll let you know.

    Apple accessories

    The Apple-branded accessories that come in the box with your iPod, including the power adapter, are covered by our warranty and consumer law. They’re also covered by AppleCare Protection Plan or AppleCare+. For service details, contact Apple or an Apple Authorised Service Provider.

    Get ready for iPod service

    • Back up your iPod touch with your computer or use iCloud. You’ll need the backup to restore your content if we have to reset or replace your iPod touch.
    • Make sure you know your Apple ID and password.
    • Keep your cables and other accessories when you have a device serviced.

    Apple Limited Warranty and proof of purchase

    The Apple Limited Warranty covers your iPod and its accessories against manufacturing defects for one year from the date that you bought your product. The Apple Limited Warranty is in addition to rights provided by consumer law.

    Our warranty doesn’t cover damage caused by accidents or unauthorised modifications. See the warranty for complete details. You can check your cover status online and update your proof-of-purchase information if there’s an error in our records. If our warranty, your AppleCare plan or consumer law don’t cover your repair, you’ll pay out-of-warranty fees.

    Consumer law

    Your country or region may have consumer protection laws for some repair issues.

    Our after-service guarantee

    We guarantee our service, including replacement parts, for 90 days or the remaining term of your Apple warranty or AppleCare plan cover, whichever is longer. We offer this whenever you have a device serviced by us or an Apple Authorised Service Provider. This is in addition to your rights provided by consumer law.

    If your battery won’t charge or charges slowly, or if an alert message appears, learn what to do.

    Plug into power

    To charge your device, follow these steps:

    1. Connect your device to the USB cable that comes with it.
    2. Plug into one of these three power sources:

    Wall power outlet

    Plug your USB charging cable into a USB power adapter, then plug the adapter into the wall.

    Computer

    Plug your charging cable into a USB 2.0 or 3.0 port on a computer that’s on and not in sleep mode. Don’t use the USB ports on your keyboard.

    Power accessory

    Plug your cable into a powered USB hub, docking station, or other Apple-certified accessory.

    How to fix your ipod jack

    If you’re trying to charge wirelessly with an iPhone 8 or later, first make sure that you can charge with the USB cable that came with your device. If that works, then get help with wireless charging. For a third-party accessory, check that it’s Apple certified.

    When your device charges, a lightning bolt appears inside the battery icon in the status bar , or a large battery icon on your Lock Screen .

    My device charges slowly or won’t charge

    My device stopped charging at 80 percent

    Accessory Not Supported or Certified message

    If your device charges slowly or won’t charge

    Follow these steps and try again after each:

    1. Check your charging cable and USB adapter for signs of damage, like breakage or bent prongs. Don’t use damaged accessories.
      How to fix your ipod jack
    2. Use a wall power outlet and check for firm connections between your charging cable, USB wall adapter, and wall outlet or AC power cable, or try a different outlet.
    3. Remove any debris from the charging port on the bottom of your device, then firmly plug your charging cable into your device. If the charging port is damaged, your device probably needs service.

    How to fix your ipod jack

  • Let your device charge for a half hour.
  • If your device is still unresponsive, force restart your device:
    • iPhone 8 or later and iPhone SE (2nd generation): Press and quickly release the volume up button. Press and quickly release the volume down button. Press and hold the side button until the Apple logo appears.
    • iPhone 7, iPhone 7 Plus, and iPod touch (7th generation): Press and hold both the side (or top) button and the volume down button until the Apple logo appears.
    • iPhone 6s or earlier, iPhone SE (1st generation), and iPod touch (6th generation) or earlier: Press and hold both the side (or top) button and the Home button until the Apple logo appears.
  • Let your device charge for another half hour.
  • If your device still won’t power on or charge, take your device, charging cable, and charging adapter to an Apple Store or Apple Authorized Service Provider for evaluation. You can also contact Apple Support.
  • How to fix your ipod jack

    If your device stopped charging at 80 percent

    Your iPhone might get slightly warmer while it charges. To extend the lifespan of your battery, if the battery gets too warm, software might limit charging above 80 percent. Your iPhone will charge again when the temperature drops. Try moving your iPhone and charger to a cooler location.

    iOS 13 and later use Optimized Battery Charging to slow the rate of battery aging by reducing the time that your iPhone spends fully charged. Your iPhone uses on-device machine learning to understand your daily charging routine so that it can wait until you need to use your iPhone to finish charging past 80 percent.* Optimized Battery Charging is active only when your iPhone predicts that it will be connected to a charger for a long period of time.

    * Information regarding your charging routine is stored only on your iPhone. The information isn’t included in backups and isn’t shared with Apple.

    How to fix your ipod jack

    If an alert says that your accessory isn’t supported or certified

    These alerts can appear for a few reasons:

    • Your iOS device might have a dirty or damaged charging port
    • Your charging accessory is defective, damaged, or isn’t Apple-certified
    • Your USB charger isn’t designed to charge devices

    Follow these steps:

    1. Remove any debris from the charging port on the bottom of your device.
    2. Restart your iPhone or iPod touch.
    3. Try a different USB cable or charger.
    4. Make sure that you have the latest version of iOS.
    5. Contact Apple Support to set up service.

    Wipe it clean or restore from a backup

    How to fix your ipod jack

    • Tweet
    • Share
    • Email
    • Tweet
    • Share
    • Email

    What to Know

    • Computer: Open iTunes > connect iPod touch to computer > select device icon >Restore iPod touch >Restore.
    • No computer: Open Settings >General >Reset >Erase All Content and Settings > enter Apple ID or passcode.
    • You can also restore your iPod Touch from an iCloud or computer backup.

    This article explains how to restore your iPod Touch to factory settings, as well as how to restore it from an iCloud or computer backup. Information applies to iPod Touch devices running iOS 12 and later.

    How to Factory Reset an iPod Touch With Mac Finder (macOS Catalina and earlier)

    When Apple removed iTunes from macOS Catalina, you might have thought you could connect your iPod to the Music app that replaced iTunes, but no. Instead you use the Finder to back up and restore your iPod Touch:

    Open the Finder by clicking its app in the Mac Dock.

    How to fix your ipod jack

    Connect the iPod Touch to the Mac via cable.

    Select iPod Touch in the Locations section of the Finder sidebar.

    How to fix your ipod jack

    Select Restore iPod Touch.

    How to fix your ipod jack

    Select Restore again to confirm. The computer erases your iPod Touch and installs the latest iPod software.

    Your iPod restarts and you can set it up as new.

    When you restore an iPod Touch to factory settings, you’re returning the device to its original state, fresh out of the box, wiping away all your personal data and settings. It will also install the latest compatible iPod software.

    How to Factory Reset an iPod Touch With iTunes (Mac or PC)

    Before you begin, if there’s any information on your iPod Touch you want to save, make a backup and turn off the Find My tool.

    On a Mac with macOS Mojave 10.14 or earlier (or on a PC), open iTunes.

    How to fix your ipod jack

    Connect your iPod to your computer and unlock it, entering your passcode if prompted.

    Select the small icon representing your device in the upper left corner of iTunes.

    How to fix your ipod jack

    Select Restore iPod Touch.

    How to fix your ipod jack

    Select Restore again to confirm. The computer erases your iPod and installs the latest iOS version.

    Your iPod Touch will restart and you can set it up as new.

    How to Factory Reset an iPod Touch Without a Computer

    If you don’t have access to a computer but your iPod Touch is still functioning, here’s how to restore it to factory settings.

    Tap Settings.

    Select General.

    Scroll down and tap Reset.

    Tap Erase All Content and Settings.

    How to fix your ipod jack

    If prompted, enter your Apple ID or passcode.

    Wait a few minutes, and then your iPod will be reset to factory settings.

    How to Restore an iPod Touch From a Backup

    If your iPod Touch isn’t working correctly, restoring the device from a backup might solve the problem. Or, if you buy a new iPod Touch, restoring from a backup will load your data and settings onto the new device.

    There are two ways to do this: restore from an iCloud backup or restore from a backup on your computer.

    iCloud Backup

    Here’s how to restore an iPod Touch from an iCloud back up:

    Before you can use these steps, you have to erase all the content on your iPod Touch. See the above instructions on restoring your iPod Touch to factory settings.

    Turn on your device. You should see a Hello screen.

    Follow the on-screen setup steps until you reach the Apps & Data screen.

    Tap Restore from iCloud Backup.

    Use your Apple ID to sign in to iCloud.

    Choose a backup. Once you select a backup, the transfer begins.

    If you see a message indicating that a newer software version is required, follow the onscreen steps to update.

    When prompted, sign in with your Apple ID to restore your apps and purchases.

    You’ll see a progress bar with the message Restore from iCloud. Stay connected to Wi-Fi during this process.

    When this process is complete, finish the rest of the setup steps and enjoy your iPod Touch.

    Content such as apps, photos, music, and more will continue to restore in the background for the next several hours or days, depending on how much data there is.

    Computer Backup

    To restore an iPod from a computer backup:

    If you’re using a Mac with macOS Catalina 10.15, open Finder. On a PC or with a Mac with macOS Mojave 10.14 or earlier, or on a PC, open iTunes.

    Connect your device to your computer with a USB cable. If prompted, enter your device passcode.

    Select your iPod Touch when it appears in the Finder window or iTunes.

    Select Restore Backup.

    Carefully choose the backup you want, paying attention to dates and times.

    Select Restore and wait for the process to finish.

    Keep your iPod Touch connected. The device will restart and sync with your computer. Disconnect only after it’s done syncing, and enjoy your restored iPod.

    Get your PC and your headphones working together again

    How to fix your ipod jack

    How to fix your ipod jack

    • Western Governors University
    • Tweet
    • Share
    • Email
    • Tweet
    • Share
    • Email

    Windows 10 has known issues with sound, specifically with headphones. If you experience no sound through your headphones or your headphones aren’t detected by Windows 10, there are several things you can try to get things working again.

    Causes of Headphone Issues in Windows 10

    The physical connections of the headphones commonly cause most sound issues with Windows 10 and headphones. Headphone jacks get dusty, pins get bent, and wires get frayed. The internal mechanics of some headphone devices, like mute buttons, can get knocked loose and cause problems.

    Software and driver issues are another common cause, as with any computer peripheral. Outdated or buggy drivers, incompatibilities, and missing software can result in a similarly frustrating experience.

    How to Fix Headphone Issues in Windows 10

    Solving any headphone issue relies on understanding what the cause of the problem is. Once you determine whether it’s a hardware or software problem, it shouldn’t be long before you have working headphones again. These tips walk you through solutions from easiest to most difficult, so if you’re not sure what’s causing the problem just start and step 1 and move through the list.

    Check the audio jack. On the back of your laptop or desktop, look for the audio output port, often labeled with a headphone or speaker icon, and make sure the headphones are plugged in. You might also want to unplug and plug the headphones back in since it’s possible the plug wasn’t pushed in all the way. You’ll feel it click when the plug is fully inserted.

    Most modern computers label the audio output in green.

    Check the external speakers. Some external speakers have a headphone jack built-in. The main difference is a separate power source. Many speakers require one. Make sure it’s plugged in, and the speakers are on, as the speakers may not provide enough power for the headphones.

    Check the headphones. Some headphones come with an inline audio control that works independently of the Windows 10 sound controls. Make sure the volume is loud enough for you to hear it.

    Check the volume controls. In the lower-right corner of the screen, right-click the speaker icon, then select Open Volume Mixer. Adjust the slider for your headphones up to hear the sound better.

    Unmute the headphones. In the Windows volume controls, a red circle with a slash through it indicates something is muted. Select the speaker below the mixer volume to unmute the headphones.

    Set the output device. The headphones may not be your output device. Right-click the speaker icon in the lower-right corner of the desktop. Then, select Open Sound Settings. Select the Choose your output device drop-down menu, and choose your headphones, if not selected.

    If you have sound playing for a test, you’ll see the volume levels move.

    Set the individual app volume. In the Windows sound settings, scroll down, and select app volume and device preferences. Here you can re-confirm what your output is set to and the volume.

    You can also control individual sound volumes for various apps that are running.

    Check the sound playback devices. Right-click the speaker/sound icon in the lower-right corner of the desktop, and select Sounds > Playback to see if your headphones are listed. If it doesn’t have a green check mark next to it, Windows 10 may not detect it, and you may need to install new drivers.

    Check the Sounds device usage. In Sounds, right-click your headphones, select Properties, and set Device usage to Use this device (enable).

    Adjust the sound balance levels. In Sounds, select the Levels tab to verify the volume setting for your headphones. Select Balance to adjust the Balance levels.

    Disable sound enhancements. Some sound cards will not function if any of the enhancements are enabled. In Sounds, go to the Enhancements tab and select Disable all enhancements. Then, select Preview to test your headphones.

    Try Windows 10 Troubleshooter. To run the troubleshooter, follow these steps:

    1. From the desktop, right-click the speaker/sound mixer icon, then select Troubleshoot sound problems.
    2. If you have to select which device you want to troubleshoot, choose your headphones and select Next.
    3. If asked, select No, Do not open Audio Enhancements.

    Update the sound drivers. You can usually accomplish that from the Windows Device Manager. Sometimes, outdated drivers can become incompatible with an update to Windows, or you may be lacking a new feature required to play the audio properly.

    Download drivers from the manufacturer. If the Device Manager method didn’t work, turn to the manufacturer of your headphones, sound card, or both. Ideally, update everything you can, including Windows, to ensure that everything is compatible and operating with the latest features and bug fixes.

    To install drivers from your sound card developer, go to their website and download the latest driver for Windows 10. Make sure you remember where you downloaded the files, as this will be important for installing the drivers later.

    If you select Let me pick from a list of available drivers on my computer, Windows reinstalls the current driver, which rarely fixes sound issues.

    If your headphones still won’t work, it might be time to invest in a new pair. We’ve tested quite a few to come up with our recommendations, so check them out!

  • » Opinions and Analysis on iPhone models –
  • iPhone 4 – background
  • iPhone 3GS – background
  • iPhone 3G – background
  • iPhone 2G – the original, background

    Have your Earbuds snapped off in your Touch headphone jack?

    I have a huge reputation for repairing iPhones and ipod Touch models that have been dropped in water. I also repair non-water immersed iPhones and iPod Touches. It the same skill set, with a bit less excruciating work 🙂 The most common repair for these of course is a cracked upper glass or LCD screen.

    When I repair your iPod Touch, all of your music, video and photos will still be there afterward. So will your contacts and calendaring and apps

    The shank of any pair of earbuds has three connection points. The broader top most part is “common”. It is also called the “Neutral” or “ground”. The middle section is left side positive connection and the bottom most tip is the right side hearing’s positive connection.

    These parts have fine wire embedded in an injection molded plastic bed that is surrounded by the metal shank piece that makes contact inside the headphone jack.

    Not always. but from time to time, the plastic at the tip weakens. or may have been a bad molding job and the tip separates leaving it in the “earbud jack” inside your iPhone or iPod.

    This can happen even if with the pair that Apple included with the device. In some cases the manufacturer will give you a free set of replacements if you tell them the tip separated inside the device. But no one will remove the tip or pay to have someone do it for you.

    Somewhere on the internet, people are getting the impression the solution is apply super glue to a paperclip and hope you can touch the tip back end and remove it. I’ve had to fix a pile of the problems that develop from that attempt before.

    The proper way to handle the problem isn’t isn’t to try to pull it from the front, it’s to push it out from the back.

    I doubt that you know how to safely get in and do this, that’s where I come in. Give me call and we can set up the repair.

    I’ve made this repair many times. Below is an example of this problem I’ve corrected. In this case it’s brand new iPhone 4G but the task and concept is the same for an iPod Touch model. If you have a touch with this problem, I can repair it.
    Raymond Tantorelli called me from Sebastopol California (95432) about his *NEW* iPhone 4. The problem he had occurs in many devices even if you are using an expensive set of earbuds. I mean more expensive than the ones Apple sends with the phone.

    The end tip which provides the left side positive connection for the stereo earbuds had broken off and now remained in the earbud jack. Catch this. even if it’s an Apple set of earbuds, having it break off in their new device still constitutes “abuse” and abuse voids the warranty.

    I see this problem repeatedly. I’ve fixed it in iPhones, iPod Touch models, iPod nano models, Classic iPods and now three times in iPads. I guess that runs the Apple table.

    It requires the complete dismantling of the device and then pushing straight back out again on the the earbud tip to free it.

    These are photos of the dismantling and correcting of the problem.

    How to fix your ipod jack How to fix your ipod jackHow to fix your ipod jack
    How to fix your ipod jack How to fix your ipod jackHow to fix your ipod jack

    This is a photo of Raymond. I suppose, his phone is now “under warranty” again. Total cost was $60, to get the phone they would have charged him $550 to replace!!

    How to fix your ipod jack

    This tip removal service is $60 which is my standard iPod Touch labor rate.

    How to fix your ipod jack
    How to fix your ipod jack
    How to fix your ipod jack
    How to fix your ipod jack

    These are comments people have sent me after they received their iPod back fixed.
    http://www.isickbay.com/comments/comments.shtml

    Here is an interesting case that shows the degree of intensity I exhibit at my work on hard drive based iPods
    http://www.isickbay.com/call–1-877-IPOD-PRO/recent_fixes/recent_fixes_13.shtml

    email me at [email protected] with questions or to set up a repair.

    Monday through Friday from 10am to 7pm, and Saturday & Sunday noon to 6pm.

    I’m in Sonoma County. Northern California wine country,


      Frank Walburg
      Service Court
      Santa Rosa, Ca 95403-3139

    The iPad is one of the most revolutionary devices created by Apple to set the tablet market on fire. Expanding on the iOS mobile operating system, Apple created a bigger and more utilitarian version of their beloved iPhone without the phone calling feature which became a hot seller and still is the go-to tablet for beginners and professionals alike who need a tablet to execute operation which lies in between the range of a laptop and a phone.

    Released on the 3rd of April 2010, the iPad became Apple’s second tablet following the Newton Message Pad 100 which was introduced in 1993 and discontinued in 1998.

    The iPad was put into development before the iPhone. In the beginning, the iPad was available only in the Apple Store but soon was available in all retail stores.

    Ever since the release of the iPad, Apple has been improving with every version they have been releasing, sometimes making them in different classes like the smaller iPad mini or even making them with an extra color luscious huge 12 inch screen as the iPad Pro.

    All of the iPads can connect WiFi, and the 2nd version of each generation comes with the feature of using cellular to stay connected all the time.

    The iPad and its classes have been ranked second in the world with its retina display and have stood the test of time from its Android competition who are in the first place.

    But sometimes one of the most important and desired feature of the wired age we are in fails on the iPad. And no, it’s not your charging port but the 3.5 mm jack which gives you full audio privacy while enjoying your jam or watch a video in utter audio privacy.

    And it doesn’t fail due to any system problems but the fact that the user broke his or her headphone jack in the jack and cannot get the broken piece out.

    So today we are here to give some tips and solutions on how to fix headphone jack broke off in iPad issue.

    The solution given below can be used with a wide variety of devices which accommodate the 3.5 mm jack as many devices are going wireless due to the current trend of Apple removing the jack.

    • 1 4 Ways to Fix Headphone Jack Broke Off in iPad
      • 1.1 The ballpoint pen stick up
      • 1.2 Thumbtack Bend
      • 1.3 Sticky toothpick
      • 1.4 Re jacking the jack

    4 Ways to Fix Headphone Jack Broke Off in iPad

    The ballpoint pen stick up

    The ballpoint pen sticks up is the solution where you take a ballpoint refill and jam it into the jack and then pulling out the refill after you apply some pressure at the speed of light.

    This method can be improved with a bit of super glue but when the user uses this add on one should be careful not overdose the ballpoint refill with lots of super glue as it can sometimes coat the walls of the 3.5 mm jack which will make it unresponsive or even solidify the broken jack in the hole. The ballpoint pen stick up

    Always try to use a ballpoint pen refill which has got the same diameter of the jack. Don’t use the nib of the pen instead always use the back end in such situations even though you might be able to wedge out the broken jack using the nib.

    This is because it might damage the wall of the 3.5 mm jack which will provide you with occasional interference when using the jack. Most probably after this method you won’t face headphone jack broke off in iPad issue again.

    Thumbtack Bend

    From the name itself, one can derive that this solution involves a thumbtack and the action of bending the said thumbtack.

    This, in theory, is the most straightforward solution but in practice, it’s the hardest as you have to bend the pointy edge to a shape of a hook which in turn on has to use to hook the broken jack out of the hole. Thumbtack Bend

    It’s not very risky to neither the broken jack nor the 3.5 mm jack but a minor risk persists to the user as you could get yourself pricked, so watch out. A safety pin can also execute this solution. This will fix headphone jack broke off in iPad error.

    Sticky toothpick

    This is another version of the second solution which is mentioned in this list.

    This solution involves taking a single toothpick and dipping any edge of it in super glue or any adhesive like super glue. Sticky toothpick

    After which one should be careful not to touch the walls of the jack and just touch the broken jack and slowly drag it out.

    While dragging out also be very careful not to touch he gluey end of the toothpick on the walls of the jack. This is a more inexpensive solution as you won’t be spoiling a pen but instead an expendable toothpick.

    Re jacking the jack

    This solution involves using the broken earphones or headphone wire from which the jack broke from and then jamming it back in and by luck, it will reattach hence making you pull it out.

    If you don’t want to play on lady luck, one can just apply some super glue on the broken end and jamming it in will allow you certify a connection to the broken jack which in turn will let you pull the broken jack out.

    One should be careful when applying the super glue because one should not overdose it as it might spread when it comes in contact with the broken jack.

    If you generously used superglue, then you should be careful not to jam it in too hard. Just make it touch the broken jack which in turn must be slowly and gently pulled out delicately.

    It’s because you just touched the broken jack and not establish a full proper contact which can only be achieved by jamming it.

    Hope, you won’t face headphone jack broke off in iPad issue from now.

    Table of Contents

    iPod Touch Screen Problem

    Nothing is worse than coming home with your brand new gadget and find a major problem with it. In the case with iPod touch this can be a defective screen with the so called negative black effect. Such screens have problems displaying dark colors. Often the screen is quirky or flickering while playing videos on iPod. When we have that kind of an iPod touch Screen, how can we possibly fix that iPod touch screen problem? please read the tips from www.applerepo.com blog below:

    Steps to Fix Broken iPod Touch Screen

    How to fix your ipod jack

    Steps to Fix Broken iPod Screen

    Here are several suggestions on how to improve our iPod screen functioning:

    + First, turn the auto brightness off. This will reduce screen flickering and sometimes may fix your iPod’s touch screen problem for a longer period of time.

    + Check if the battery is low. However, this kind of problems seems to appear even if battery is fully charged and iPod is running off the USB power.

    + Put a little pressure on the back and bottom right corner and the iPod device would usually correct itself for a while. This method is not a permanent solution to fix your iPod touch screen problems but anyway, you can use it as a temporary measure until your device is replaced by the manufacturer.

    Video Tutorial about iPod Touch Screen Broken Repair and Replacement

    Manufacturers of iPods have finally officially acknowledged that the problem is a really existing one and that a corporate policy on fixing iPod touch screen problems is a necessity. The problem has been ascribed to bad quality control and misapplication of the reflective coating of the LCD display. Companies like Apple have launched replacement policies for the defective touch devices until upgraded outputs have been released to meet the expectations of the clients. Software updates have not proved effective so far. In fact, they have just alleviated the screen problems and have proved no final solution to fix iPod touch screen problem .

    Post Tags: ipod touch glitching screen

    Related Articles

    Is Your iPod Touchscreen Not Working?

    The best way to Fix your IPod Touch Screen Not Working Problem

    116 comments

    Jenn have you ever tried taking a q-tip with nail polish remover and put it in the headphone jack, and wait about 10 minutes and you can unlock your ipod. p.s. i can use my ipod and stuff but the screen stays black and i cant control my volume or use the sleep button

    How do you fix a ipod with lines through the screen where you cant even see the screen? There is colored lines and black and white lines so i dont know how to find a solution to this problem.

    uhmm i am on band and i didnt have pockets so i put my ipod in my boobs and we was
    working on a show for a competition and i was sweating now it have like water spots inside of my screen what can i do to get it out .

    You can put it in rice and the rice will soak up the water and or sweat

    I have about 60 apps but it only shows about half even youtube and other apps that come with my ipod touch 4G wont work wy? Please help me

    we went on a game and the screen went white will not shut off or anything

    My iPod’s screen broke and got it fixed. When i got it back i tried using it but as well as responding to my commands it responds to random ones of it’s own. Say i am trying to find a song it would take over and find its own. My iPod is now unusable, can someone please help!

    I have a 3rd. gen,32 gig,ipod touch, stopped working week ago, no water damage just stopped working, plugged up to itunes wouldn’t recognize it so I restored it twice. Screen comes on but wont slide on or off, drains battery without using it. Can sync music and apps, or at least it shows it is.Screen is very bright and no red where it would be if I had water damage. It is 3 yrs old

    it was put under my pillow not the screen is so dull that the brightness doesnt work, plz help

    MY back light is broken how do i fix it? It wont turn on and ive messed with the settings and such but it still wont work and took off the auto brightness its like someone put shades on it.

    i have problem with the screen color the color of my apple i touch 4 changes itself it becomes grey and plz help

    My ipod needs a new screen and home botton and a new top piece help!

    hey, i have had my ipod touch gen 4, for like two and a bit months and like five weeks ago it got a crack in the top corner. it’s not massive and it hasn’t appeared to have affected how the ipod was working. i drop my ipod occasionally but it has not seemed to have ever made a difference. today when i went to use my ipod the touch screen wassn’t responding well, it lets me get up to the passcode enterer and then when you type in the passcode it goes really slow and like, put’s white boxes arround the number you press. you have to click all the numbers like four times and it’s really slow, i turned the ipod of and left it for a minute, then came back and it was fine.. but like two hours later (like now?) when i tried it it did it again. i turned it on and off and that but it still isn’t responding well, when i manage to type my passscode in which i am certain is correct… it says wrong passcode, i can’t be sure if it is the messed up screen putting in the wrong lnumbers or something else, so i was also wondering if you could reset the password without knowing it, thanks jaymee 🙂

    I was on my one app and my whole ipod touch turned off, and wont turn back on, i’ve try charging it and everything. please help i need my ipod.

    i have tha same problem except i fell asleep on top of it and i cant unlock itor play music its like it doesnt regonnize my finger

    my ipod touch fell in the toilet –(second time) By an accident and now iT wont let me slide and unlock but i cant press no button on the screen i cant even press play for music .
    I DONT KNOW WATTT TO DO.
    my ipod is evrything plzzz help me thnk u!.

    Did you try drying it out with a dryer or sticking it in the freezer. That worked for my cell. You may have to send it to someone or if you are the savvy type ; you can always fix it yourself. That’s what I have done. Got used one off ebay it had issues and I’ve fixed one thing at a time; I find that alot cheaper than sending to be serviced. You could have damaged the board also. It would be hard to tell. I would try with the freezer first then go through a list. I hope that helps.

    my ipod touch fell in the toilet –(second time) ny an accident and now i will tey to slide and unlock but i cant press no button on the screen i cant even press play for music .
    I DONT KNOW WATTT TO DO.
    my ipod is evrything plzzz help me thnk u!. 🙂

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Description

    iPod Touch 6th Gen Headphone Jack Repair Service

    The iPod Touch is a great device that provides a ton of entertainment, enjoyment and functionality. If you are experiencing no sound at all from the headphone jack or your sound is intermittent or inconsistent when the headphones lose connection, add this service to your cart.

    Our team of professional repair technicians will receive your device, perform a full diagnostic to find if any issues have developed in addition to the headphone jack problem. The turnaround is 24 hours once we receive the device. We use only high quality replacement parts which are covered by a 90 day warranty (does not include accidental damage).

    Put the music back into your life with our headphone jack repair service. Your iPod Touch 6th Gen does not have to become an expensive paperweight. This repair will give you back the enjoyment of your music collection and video playback.

    Contact us at [email protected] or 888-494-4349 with any questions about your device or service.

    Payment & Security

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Estimate shipping

    ASK TECH A QUESTION

    Refund Policy

    Additional Return Requirements and Policy

    1. All return or replacement request will be processed within 5 business days after returned item is received by iFixYouri
    2. Shipment received with visible damages must be reported to us within Three (3) calendar days of the delivery date. In the event an item is sold without shipping charge, iFixYouri will refund the amount of sale.
    3. All returns with missing part(s) (including, but not limited to, accessories, manuals, warranty registration cards, original manufacturer packing materials and retail packaging) will not be processed until the part is received.
    4. Customer is responsible for return shipping expenses and restocking fee unless otherwise explicitly states on the product. Replacements will be shipped at our expense.
    5. Customer is required to ship the return products with sufficient shipping packaging and void fill material inside to prevent product from physically damaged during return transportation or customer will be responsible for any loss and damages in return shipping. Any loss or damages during the return shipping due to insufficient shipping packaging may result the return to be rejected back to you or charges to be applied to your refund determined by iFixYouri.
    6. Upon our acceptance of the merchandise in like new condition in strict conformance with the basic criteria and standard returns policy, the purchase price will be credited to the credit card used for the original purchase.
    7. Refund will be issued after our warehouse receives, inspects, and processes your return. iFixYouri will refund back to your method of payment.

    Restocking Fees and Return Shipping Labels

    Returns are subject to restocking fees and return shipping fees. For products that are eligible for return or replacement, the return shipping labels are free for returns or replacement of the same item within the applicable return policy period and return reasons.

    iFixYouri does NOT charge restocking fee and return shipping labels within return policy period for returns of damaged or defective products, wrong product was sent to you, or the product did not match what was shown on website.

    In the event a returned product which is not defective, not the original product that was sent to you, or the product does match what was shown on the Site after our inspection, the product will be returned to you at your cost and the return shipping cost initially covered by iFixYouri will instead be deducted from the refund amount along with any necessary restocking fee that may apply.

    Old iPod devices such as iPod Classic and early iPod nano are prone to data corruption. Data corruption usually occurs when you unplug the iPod without ejecting it first or if you drop the iPod while the hard drive is spinning (hard drive disk errors).

    Corruption errors can cause the iPod to freeze and may prevent CopyTrans and CopyTrans Manager from properly copying music back and forth. Here’s how to repair iPod corruption errors.

    First, reset the iPod and place it in disk mode

    Resetting the iPod does not delete any data from the device but may help you fix corruption errors.

    First make sure that the device is not connected to your computer

    Next, toggle the Hold switch on top to the ON and then back to the OFF position a couple of times

    Press and hold both the Menu button on top and the Center button in the middle of the click-wheel for at least 10 seconds. Hold until the Apple logo appears on the iPod screen How to fix your ipod jack

    With the Apple logo in view, press and hold both the Center button in the middle and the Play/Pause button untill you see the iPod Disk Mode screen. How to fix your ipod jack

    If the issue is not resolved, continue with the steps below.

    Next, check for file system errors on the iPod drive

    Windows features an in-built tool called Check Disk that helps you detect and fix errors on the iPod drive. To run Check Disk:

    Keep the iPod disconnected from your PC, close iTunes and run CopyTrans or CopyTrans Manager. This is done to avoid accidental deletion of content from your iPod by iTunes

    Only now connect the iPod

    Right-click the Start menu icon and choose “Open Windows Explorer” How to fix your ipod jack

    From the right-hand pane select “Computer”. This is the place where all connected drives are listed How to fix your ipod jack

    Right-click on the iPod and choose “Properties” How to fix your ipod jack

    From the newly-opened window, navigate to the “Tools” tab and click “Check now…” under “Error-checking” How to fix your ipod jack

    Make sure that the “Automatically fix file system errors” option is checked and hit the “Start” button. How to fix your ipod jack

    Check Disk will now try to find and fix errors on the iPod drive. How to fix your ipod jack

    If the iPod is still not repaired at this point, the next step is to check the iPod drive for bad sectors and physical damage.

    Finally, check for bad sectors and physical drive damage

    Bad sectors are chunks of data on the drive that the iPod can’t read. Bad sectors are indicators of physical damage on the drive. Dropping the device while the hard disk is spinning is a common cause of bad sectors. To check the iPod for bad sectors and physical damage:

    Follow steps 1. to 5. from the above section

    Ensure that the “Scan for and attempt recovery of bad sectors” is checked and click “Start” How to fix your ipod jack

    This scan can take a very long time to complete (in some cases hours). Once the scan is complete, see the resulting message which will say whether any bad sectors were found and repaired. How to fix your ipod jack

    Optional – use HD Tune to check for physical damage

    HD Tune is a popular third-party tool that we recommend using for visualizing physical damage on iPods with rotational hard drives. HD Tune does not repair your iPod hard disk. There is no need to use HD Tune on other iPod types such as iPod nano.

    Download the free trial version of HD Tune from the following page

    Open HD Tune and navigate to the “Error Scan” tab, then click “Start” How to fix your ipod jack

    Once the scan completes, be on the look for red fields such as the ones from the below screenshot. Red fields indicate physical damage on the iPod drive. How to fix your ipod jack

    If the iPod drive is physically damaged, we encourage a visit to your local electronics repair shop instead of the Apple Store. Installing a new hard-drive on the iPod would not break the bank, while Apple would most probably send you away or offer you to purchase a new device.

    Related article

    Krasimir is an avid marketing aficionado and a tech-support specialist in charge of the English-speaking market. He grew up in Bulgaria and on the island of Mauritius where he became passionate about windsurfing and photography.

    This post aims at showing you why iPod won’t sync and how to fix iPod classic/nano/shuffle/touch not syncing issues. Do keep reading and get more details.

    Common iTunes Issues

    iTunes Sync issue
    • iPhone Songs Won’t Sync to iTunes
    • iPod Won’t Sync with iTunes
    • iTunes Waiting for Sync to Start
    • iTunes Sync Problem for iOS Update
    iTunes Connect Problem
    • iTunes The Value is Missing
    • iTunes Say You Don’t Have Permission
    • iTunes Store Sign in Problem
    • Stuck on Connect to iTunes
    • iPhone Not Showing in iTunes
    • Can’t Recognize iPhone in Recovery Mode
    iTunes Backup and Restore
    • Backup Not Enough Space on Computer
    • Restore Not Enough Space on iPhone
    • iTunes could not Backup the iPhone
    • iTunes Backup Corrupt or Incompatible
    iTunes Music issue
    • Add iTunes Music to iPhone Failed
    • Purchased Music Missing from iTunes
    • Cannot Add Music to iTunes
    • iTunes Songs Greyed Out

    AnyTrans – Sync iPod Data to iTunes Easily

    Free download AnyTrans to transfer data on iPod to iTunes with simple clicks.

    My iPod won’t sync with iTunes anymore. Although I upgraded to the latest version of iTunes, I still can’t fix iPod not syncing problems on my Windows 10 PC. Why is my iPod not syncing with iTunes? Anyone can help me?

    When syncing iPod with iTunes on your Mac or PC, you may go into a situation just like the above question described “iPod won’t sync”. And if you searched on Google, you may have found this issue happened not only on the iPod touch, but also on some other iPods, such as iPod shuffle, nano and classic, and even an iPhone or iPad. In this post, we will show you several quick solutions to fix the iPod won’t sync issue. These tips apply to fix iPod shuffle/classic/nano won’t sync issues as well.

    How to fix your ipod jack

    How to Fix iPod Won’t Sync

    • Why iPod Not Syncing Normally
    • UseВ iTunes Alternative to 1-Click Sync iPod Music
    • Basic TipsВ to Fix iPod Touch/Nano/Shuffle/Classic Won’t Sync
    • Use AnyFix to 1-Click Fix “iTunes Won’t Sync” Problem

    Why iPod Not Syncing Normally

    To fix the iPod won’t sync issue, you may search online for help. You’ll find this kind of iTunes sync problem can be caused by a variety of reasons:

    • Bad Wi-Fi connection.
    • USB cable or USB port problem.
    • Computer authorization and iCloud music conflicts.
    • Versions of iTunes or iPod operating system.

    In this post, we give you some basic tips to fix iPod won’t sync problems

    UseВ iTunes Alternative to 1-Click Sync iPod Music

    If yourВ iPod won’t sync with iTunes, you can also try to sync with iTunes alternatives like AnyTrans – iPhone Data Manager. ItВ allows you toВ transfer data on an iPod toВ other iDevicesВ and vice versa. For example, you can transfer iPodВ musicВ to iTunes, transfer App info toВ aВ new iPod Touch, transfer music from iPhone to iPod, etc.

    Besides, you can also use it to make a complete backup for your device, restore the backup, and manage iCloud content easily, etc. All you need to do is to follow the right tutorials. Here are AnyTrans’В detailed functions on sync songs:

    Sponsored Links

    How to fix your ipod jack

    B/aD0wO3c9MDthcHBpZD15dGFjaHlvbg–/http://www.weblogsinc.com/common/images/9928248613646672.JPG” /> How-To Turn your iPod in to a Universal Infrared Remote Control image

    Sometimes, you look around at all these gadgets and in a rare moment of inspiration or madness, you look at them all a little different. connected in a way they are currently not, but perhaps should be, or at least “could” be. There might not be anything “new” but there are countless combinations of disparate technologies, and we think this is a great example of combining a couple of those.

    This week’s How-To is a fun one, we take an iPod and turn it in to a universal infrared remote control which can be used to control all your home electronic equipment, or just about anything that uses a remote control, for example in our place we have our iPod controlling our TV, DVD Player, Direct TV, Ultimate TV PVR, Media Center PC, Xbox, XM Satellite Radio, Roomba and a few other random things like a Robot.

    How did we do this? Basically, we “recorded” the “sounds” an infrared remote makes on a PC and then put them on an iPod as songs. Adding a special sound-to-IR converter then turns those sounds back to IR and allows you to use your iPod as a remote control. As an added bonus, it works up to 100 feet. It’s a slick all-in-one unit and we’re never going back to 6 remotes ever again.

    If you want to see this in action before reading on, click here to watch a video (Windows Media).

    Getting Started
    For this How-to you’ll need a few things, we tried to do this in the simplest way so just about anyone can try it out, there are other ways to do this and we’ll cover those at the end of the article.

    iPod (doesn’t matter which one, we used our mini)

    PC or Mac with sound recording software (we used a PC with SoundForge)

    A Pocket PC (any Pocket PC 2002 / 2003 should work, we used a Toshiba and an iPaq)

    Griffin’s Total Remote Software and IR device (you’ll need the software and the included device).

    Getting the IR Signals

    The most important element for this How-to is the sound to IR converter from Griffin. This device (and software) was meant for Pocket PCs to extend the range and add consumer IR capabilities. We’re going to use the Pocket PC software to input the IR signals from our remotes, and then we’re going to use the sound to IR converter on our iPod later.

    We found Total Remote for about $16 on Froogle, you can also score one on eBay for less if you poke around. The software is included withthe IR device. You could make your own device, but that’ll take awhile and it’s not as polished and complete as what Griffin rolled out.

    Once you get the Total Remote software and IR device, install the software on your Pocket PC. Follow the instructions and start entering in all the remotes you’ll want to ultimately use on your iPod to control your electronics. To keep this simple, we’re going to start out with turning the power on or off on our TV.

    On the Pocket PC tap Start > Programs > Total remote

    Tap Edit > “Start One-Shot Sampling”

    Then pick a button on the interface, we picked the power button.

    Total remote will then prompt you to hold the remote (in our example, the TV remote) up to the IR port on the Pocket PC. This records the IR signal.

    Once recorded you can test the captured IR signal by using the IR device included with Total Remote. Once you verify that it’s working, it’s now time to get that IR signal off the Pocket PC and on to a computer as a sound file. You can also record more signals, but we’re going to keep moving for now.

    “Recording” the IR Signal
    Remove the Total Remote IR device from the Pocket PC headphone jack and run a line out cable from the Pocket PC to the Microphone or line in. You can get a 3.5mm stereo able like this from any computer store or RadioShack. Many computers come with this to run sound out to speaker, that’ll work too.

    On your desktop computer (for our example, a PC) use a sound-editing program that can edit sounds and remove channels (left and right). We’re using SoundForge for our example.

    In your recording app, set the recording format to the following (this is really important).

    44 Hz, 16bit Stereo. PCM

    We’re ultimately going to save this as a WAV (Windows Sound file) some applications might need to know that each of time.

    Hit record in the sound recording application, then on the Pocket PC with the line out from the headphone jack to the line in on the desktop computer, hit the button you assigned the “Power” signal to.

    Stop the recording, and press play- if you recorded it properly you’ll hear some weird beeps and pulses. That’s what the IR signal “sounds” like. In SoundForge you can actually see the pulses and signal on a wav graphic too.

    Next up, highlight the right channel and “mute” it. We’re not sure why this matters, but it does. If you don’t the sound won’t process through the IR device properly.

    Now, save the sound recording as a 44 Hz, 16 bit Stereo, PCM WAV file. We called ours “power.wav”

    Click here to listen to our recording (wav file).

    Putting the Signal on the iPod
    Pop your iPod in the cradle, in iTunes, make a new playlist, we called ours “TV” and then add the WAV file to the playlist, the file will then transfer to the iPod and we’re ready to test.

    Ready, Aim, Fire.
    Remove the iPod from the cradle, and put the Total Remote IR device in the headphone jack of the iPod. Go to the playlist, point the iPod and the TV and if you’ve done everything right, you can now control your TV, or anything else for that matter with your iPod.

    And that’s it. We entered in a few dozen signals from 5 or so remotes and it’s been working out great.

    If you didn’t see the video, click here to view (Windows Media).

    Advanced topics.
    If you don’t want to spring $16 or so for the Griffin Total Remote IR device and/or don’t have a Pocket PC, you can most likely make your own IR recorder, here’s an IR Reciever from RadioShack. You’ll need to get a PC microphone, cut the mic part off and splice in an IR receiver to record.

    To transmit from the iPod, again, you’re likely able to take a pair of headphones, slice the ear buds off and splice in an IR transceiver, here’s one from RadioShack that we think would work out.

    You’ll still need to find a sound recorder application, but there are tons of those, many free ones, google around for your specific platform and operating system.

    We did this a long long time ago, for another “hack” so we’re sure it’ll work out. If you run in to a jam, drop us a note, we’ll try to help.

    Now, you might ask why we didn’t make our own from the start. this because all that would take way too much time, and since we had a Pocket PC, $16 was pretty cheap for a very useful Universal remote using our favorite gadget, the iPod. It’s worth noting that this will work on other devices that can play sound, for kicks we put the wav files on our Mac, PC, linux box and were able to use those as a remote as well.