How to install a network interface card

A network interface card (NIC) is easy to install. The only considerations for installation are that you have an available slot and that the NIC is designed for the slot type you have. Most PCs use a PCI or a PCIe (“e” for express) slot for a NIC. Older PCs used an ISA slot; which is now obsolete. Check that you have an available slot and the slot type, before purchasing a NIC.

Caution:Please read our safety information before attempting any testing or repairs.

Before installing the network interface card, unplug the PC to avoid an electrical shock hazard. Exercise caution as there are sharp edges on a PC and its components. Always wear a static electricity discharge strap when working with your PC’s components to avoid damaging your PC. Always follow the manufacturer’s instructions that were supplied with your modem.

How to install a network interface card

Remove the cover plate adjacent to the slot for your NIC

Align the NIC over the slot with the jack facing toward the outside of the PC

Set the NIC into the slot and press down firmly. Make sure the mounting bracket is properly aligned with any slot that might be present. It may be necessary to gently rock the card from end to end to secure it in the slot. The gold contacts at the bottom of the NIC should nearly or completely disappear into the slot. The card should be level and straight.

Secure the NIC mounting bracket to the case with a screw (or replace the securing mechanism your case uses.

Replace the cover

Plug in the ethernet wire to the RJ-45 jack and plug the other end into the your DSL modem, hub, router or if using a crossover wire, directly to another PC.

That completes the hardware installation, next you will need to start the computer and complete the software installation. Your NIC should have come with a disk which contains the appropriate drivers.

Follow the manufacturer’s instructions for installing the software. Windows will detect the NIC and start the hardware wizard; simply follow the prompts. Some manufacturers require you to cancel the hardware wizard and complete the installation using their own installation instructions.

To connect your PC to a local area network, you will have to configure your operating system software. In Windows, use the Network Wizard or read our article on the topic.

One Stop Location for All your Networking Needs

Network Interface Card (NIC) Installation

How to install a network interface card

Short for Network Interface Card, a NIC is also commonly referred to as a network adapter and is an expansion card that enables a computer to connect to a network such as a home network and/or the Internet using a Ethernet cable with a RJ-45 connector.

This section discuss the process of installing a Network Interface Card/Network Adapter.

Installation Process in Windows

  1. First step is to read the user’s guide and familiarize yourself with the new card.
  2. Power down PC and remove the AC power cord.
  3. Open the computer case.
  4. Find an available Peripheral Component Interconnect (PCI) slot on the motherboard and remove slot insert if one exists.
    How to install a network interface card
  5. Carefully remove the network card from its static-proof plastic envelope, and slide it into the slot.

  • Seat the card in the slot firmly with gentle pressure along the length of the card, especially right about the slot itself.
    How to install a network interface card
  • Snugly, screw the card to the computer frame, but do not over tighten.
  • Close the computer case.

  • Plug your computer in and power it up.
  • Click Start, then click Control Panel.
  • In Category View (vs. Classic View) click Performance and Maintenance.
    How to install a network interface card
  • Click “System” icon at bottom of window.
  • Click the Hardware tab.
  • Click the Device Manager button.
  • Double-click Network Adapters.
    How to install a network interface card
  • Beneath it should appear the name of your Ethernet card.
  • Next, double click the name of your Ethernet adapter.
  • If the text in the “Device Status” box says “This device is working properly.”, then you successfully installed the card and are finished.
    How to install a network interface card
  • If the text in the “Device status” box doesn’t say “This device is working properly.”, then write down on a piece of paper what it says and continue with next step.
  • Click the Troubleshoot. Button and follow instructions. Double check you followed the directions above. Install the most up to date device drivers.

    About Us

    We are a group of current or aspiring teachers currently studying at Pace University in Westchester County in New York State.

    Research Sources

    This site provides a step-by-step procedure list for installing a Wired Network Adapter, both USB and PCI.

    This site outlines the different ways of installing a network card in Linux depending on the Linux Distribution being used.

    This site outlines the steps to installing the Network Card driver via a manufacturer CD-ROM or a manufacturer’s website.

    This site is another step-by-step account of installing a network interface card using Windows and Network Wizard.

    Environment

    Intel® Ethernet Connection I219-LM Intel® Ethernet Connection I219-V

    Operating System

    Network Interface Card proper installation

    Cause: Correct driver for the network interface card was needed.

    • Summary
    • Description
    • Resolution
    • Additional information

    Need more help?

    Give Feedback

    Product and Performance Information

    All postings and use of the content on this site are subject to Intel.com Terms of Use.

    • Company Information
    • Our Commitment
    • Diversity & Inclusion
    • Communities
    • Investor Relations
    • Contact Us
    • Newsroom
    • Jobs
    • © Intel Corporation
    • Terms of Use
    • *Trademarks
    • Cookies
    • Privacy
    • Supply Chain Transparency
    • Site Map

    Intel technologies may require enabled hardware, software or service activation. // No product or component can be absolutely secure. // Your costs and results may vary. // Performance varies by use, configuration and other factors. // See our complete legal Notices and Disclaimers. // Intel is committed to respecting human rights and avoiding complicity in human rights abuses. See Intel’s Global Human Rights Principles. Intel’s products and software are intended only to be used in applications that do not cause or contribute to a violation of an internationally recognized human right.

    How to install a network interface card

    How to install a network interface cardAs a PC user at some point, you have heard of Network Drivers. Have you ever wondered what network drivers is all about? Prior to figuring out what a network driver is, let us get to know few things about something called Network Adapter.

    A device needs to be connected to a network for you to access the internet and that’s where network adapter comes in.

    Network adapters come in different forms, for instance, network interface card, wireless network adapter and USB Network Adapter etc.How to install a network interface card

    Most devices such as Laptops, desktops or even tablets comes with an inbuilt Network Interface Card, which is usually installed on the device motherboard.

    However, older devices lack a network interface. So, what should you do in such a situation? In case your device lacks a built-in network interface, you need to find a way for your device to interface with WiFi or LAN by installing External Network Card.

    Why Is It Necessary To Have One?

    Computer operating systems are able to support network adapters via software known as Network driver. Network drivers are actually what that you need in order to connect your computer to any network.How to install a network interface card

    In another word, a drive acts as the bridge between your device software programs and hardware. This allows your PC operating system to access and activate the hardware functions as required in the software programs.

    You will find that some network drivers get install automatically the instant the network adapter is plugged in and the power is turned on.

    However, there are some instances that you especially needs to install the particular Network Driver in your PC’s Operating System.

    Mainly to install a driver, you need the driver’s setup file, who is also mainly compatible with the version of Operating System and Hardware Model of your laptop or desktop computer system;

    So, before downloading and installing a driver, you’ll also need to consider its compatibility too. For instance, you can’t install windows 10 network drivers in Linux or in windows 7, cuz it just won’t support;

    How to Install Network Driver?

    Most are times that after installing new OS; you will find yourself with No Drivers No Internet. Don’t worry! It’s actually just a normal problem in the computer world.

    Most computer users who format their computer and clean install a New OS counter such a problem. The most frustrating thing for the lovers of the internet is that they might not be in a position to access the internet after installing a fresh OS in their PC.

    As you try to connect your PC with WiFi or LAN, a message written about ‘your computer lacks network drivers will pop up’. And I know, this is enough to stress you in.

    So, just follow the procedure given below and you’ll Good To Go!!

    #Let’s See How To Install It;

    To install the drivers, first, you’ll need to identify the type of hardware what you have and then search its name and model no. on the internet, just to download the latest drivers file of your Network Adaptor.How to install a network interface card

    You can also use the Drivers disc, only if you have a drivers CD/DVD, which comes with your laptop, desktop or with your motherboard, mainly when you bought it new.

    And you know, downloading and installing network drivers manually, is kind of hectic, since you have to refer to the hardware details and model, then carry out a thorough research for the right driver for your PC network adapter.

    This is a time-consuming task, nevertheless, you will get good results in case you find the right network drivers.

    Here’s a picture which can help you know, what particular keyword you’ll actually need to mention on the google search bar, just to find the compatible drivers:

    How to install a network interface card

    After that, open the manufactures website, and look out for the compatible drivers according to the version of your operating system;

    And make sure you’ll always need to remember one more thing that the 32-bit drivers will not work on a 64-bit OS. Vice-versa installations have been known to work, but they can develop problems.

    Pick the right version just to be sure, and stay safe rather than sorry.

    How to install a network interface card

    Once you have the drivers just double on it to install it and your system will show the driver’s status in the Device Manager;

    If you still having some problem to finding the compatible drivers or maybe having some issue related to installing the drivers;

    Then you can also try to follow the instructions given in this link which can help you out to know;

    “And that’s all for now, thanks for sticking with the article, and you know it will always good to let me know about the tutorial, in the comments down below.” ?

    This document details how to uninstall and reinstall a network adapter for the purpose of troubleshooting networking problems on Windows 7, 8, and 10.

    If a user is having issues connecting to or staying connected to a wired or wireless network, an easy first step at troubleshooting is to uninstall and reinstall the network adapter. This is also a good step to try if a user is able to connect to a network but are unable load web pages in their browser. This fix will bring the network adapter back to default settings and will resolve issues a large percentage of the time. If the the network adapter doesn’t show up in the list it could indicate a hardware issue with the adapter.

      Type “Device Manager” into the search field to open the device manager console.

    .. How to install a network interface card

    Expand the “Network Adapters” field. This will list all network adapters that the machine has installed. Right click on the adapter you want to uninstall and select “Uninstall”. This will remove the adapter from the list and uninstall the device. If troubleshooting a wireless issue make sure to select the correct device – the word “Wireless” will likely be in the title.

    .. . . How to install a network interface card

    Click “Ok” when prompted to uninstall the device. This will remove the adapter from the list and uninstall the driver.

    . . . How to install a network interface card

    Once the adapter has been uninstalled click on the “Scan for hardware changes” button to search for and reinstall the correct adapter. The icon can be hard to see – you can hover your mouse over the button to confirm you are choosing the correct one.

    .. How to install a network interface card

    If the device is successfully reinstalled it will show back up under the “Network Adapters” drop-down. Reboot the computer and see if the connectivity issue has been resolved.

    If the issue is not resolved click here for instructions on restarting the windows networking service.

    Users running Microsoft Windows

    How to install a network interface card

    Microsoft Windows users can determine the NIC (network interface card) currently installed in their computer by following the steps below.

    Windows 8 and 10 users

    1. In Windows 8, start typing system info while on the Start screen and select the System Information option in the search results.

    In Windows 10, type system info in the search bar on the taskbar and select the System Information option in the search results.

  • In the System Informationwindow, click the + symbol next to Components in the left navigation area.
  • Click the + next to Network and highlight Adapter. The right side of the window should display complete information about the network card. For example, under Name, if it says Intel(R) Dual Band Wireless-AC 7265, the computer has Wi-Fi (wireless.)
  • Windows 7 and earlier users

    1. Click Start and then click the Programs or All Programsoption.
    2. Click the Accessories and then the System Tools folder.
    3. In the System Tools folder, click the System Information program.
    4. In the System Information window, click the + symbol next to Components in the left navigation area.
    5. Click the + next to Network and highlight Adapter. The right side of the window should display complete information about the network card.

    Microsoft may install a different, but compatible driver for some network cards. As a result, the network card listed may not actually be the exact manufacturer or model that is installed on your computer.

    Other methods of determining the network card type

    1. Looking at the back of the desktop or side of a laptop, if you see an RJ-45LAN (local area network) port, the computer has an Ethernet network card.
    2. Another method of determining the network card in the computer is by physically looking at the network card. Many times the network card lists the manufacturer and part number on the actual card.
    3. If you cannot locate a manufacturer or model number of the network card, but can locate an FCC identification number, we recommend you perform an FCC search using that number. For additional information about FCC numbers, see our FCC definition page.

    Product listing or specifications

    If you’re trying to list all the specific information about your computer network card, specifying the manufacturer, type, model, and speed of the network card is sufficient. Below is an example of how this may look.

    Drivers or installation

    • Computer network drivers.
    • How to install a computer network card.

    Replacement or repair

    If you’re trying to determine the network card because it needs replaced or repaired, we recommend the network card be replaced with another network card. If you are replacing an old 10 MB network card, we recommend it be replaced with a 10/100 network card.

    4sysops – The online community for SysAdmins and DevOps

    • Author
    • Recent Posts

    How to install a network interface card

    How to install a network interface card

    • What’s the difference? Azure AD registration vs. Azure AD join – Tue, Feb 9 2021
    • Configure hybrid identity with Azure AD Connect cloud provisioning – Tue, Feb 2 2021
    • Two ways to integrate GitHub with Azure DevOps – Tue, Jan 12 2021
    • Starting PowerShell
    • NIC configuration with get-netadapter
    • Conclusion

    I’ve said it before, and I’ll say it again: if you want to “future-proof” your career as a Windows systems administrator, you need to develop sharpness with the following technologies:

    • IPv6
    • Windows PowerShell

    Today’s topic focuses on the second bullet point with a nod to the first, if that makes sense. In other words, I’m going to give you an easy-to-follow tutorial on how you can configure you system’s network interface card (NIC) by using PowerShell version 3.

    Starting PowerShell ^

    Windows Server 2012 and Windows 8 come with PowerShell v3 already installed. If you run Windows Server 2008 or Windows 7, then you can install PowerShell v3 by downloading and installing the Windows Management Framework 3.0. In addition to upgrading PowerShell, the WMF 3.0 gives you updates to Windows Management Instrumentation (WMI) and Windows Remote Management (WinRM), among other technologies.

    In this demo I’ll be using Windows 8. Let’s begin by opening an elevated command prompt and starting PowerShell.

    Press the Windows key to transition from the Desktop environment to the Start Screen. Type cmd to run a quick search for the Windows Command Processor. Right-click the cmd icon and then click Run as Administrator. You’ll be jetted back to the Desktop and, after dealing with User Account Control (UAC), you’ll have an administrative command prompt session.

    How to install a network interface card

    Starting an elevated command prompt in Windows 8

    To start PowerShell, simply type powershell and press ENTER.

    We can verify that we are running PowerShell 3.0 by running the PowerShell method $host.version.

    PowerShell 3 ships with a minimal online help system by default. This is actually by design; you and I both know that the most current help documentation exists at Microsoft, not on our local file system.

    Thus, I suggest that you periodically run update-help to download the full PowerShell help files, in addition to any updates that may be available.

    Let’s now turn our attention to NIC configuration proper. I’ll try to inject this part of the demo with useful PowerShell tips and tricks that should prove useful for beginners.

    NIC configuration with get-netadapter ^

    Windows 8 and Windows Server 2012 automatically load PowerShell modules when you issue cmdlets. Thus, you don’t need to run import-module netadapter to make the NIC-related PowerShell available to your current PowerShell session.

    Run the cmdlet get-netadapter (cmdlets are not case sensitive, by the way) to list all wired and wireless NICs on the local system.

    How to install a network interface card

    Get-NetAdapter cmdlet output

    Study the preceding screenshot if you would. You’ll want to note the friendly names of your NICs, because we actually most commonly reference them by name instead of interface index.

    To that point, I can run get-netadapter –name ethernet | format-list * to get a run of all known properties of my NIC named “Ethernet.” In that cmdlet, name is a parameter of the get-netadapter cmdlet. We pipe (or redirect) the output from the get-netadapter cmdlet into the format-list cmdlet, which retrieves all properties and presents a nice list view for your studying pleasure.

    How to install a network interface card

    Obtaining NIC properties

    If you want to see every conceivable property of your NIC, run the cmdlet get-netadapteradvancedproperty Ethernet, substituting your adapter’s friendly name for the “Ethernet” used in my example.

    Back to Figure 2, now. Did you notice that my second NIC has the name “Ethernet 2”? For easier reference through PowerShell, we should rename the friendly name of that NIC:

    Users running Microsoft Windows

    How to install a network interface card

    Microsoft Windows users can determine the NIC (network interface card) currently installed in their computer by following the steps below.

    Windows 8 and 10 users

    1. In Windows 8, start typing system info while on the Start screen and select the System Information option in the search results.

    In Windows 10, type system info in the search bar on the taskbar and select the System Information option in the search results.

  • In the System Informationwindow, click the + symbol next to Components in the left navigation area.
  • Click the + next to Network and highlight Adapter. The right side of the window should display complete information about the network card. For example, under Name, if it says Intel(R) Dual Band Wireless-AC 7265, the computer has Wi-Fi (wireless.)
  • Windows 7 and earlier users

    1. Click Start and then click the Programs or All Programsoption.
    2. Click the Accessories and then the System Tools folder.
    3. In the System Tools folder, click the System Information program.
    4. In the System Information window, click the + symbol next to Components in the left navigation area.
    5. Click the + next to Network and highlight Adapter. The right side of the window should display complete information about the network card.

    Microsoft may install a different, but compatible driver for some network cards. As a result, the network card listed may not actually be the exact manufacturer or model that is installed on your computer.

    Other methods of determining the network card type

    1. Looking at the back of the desktop or side of a laptop, if you see an RJ-45LAN (local area network) port, the computer has an Ethernet network card.
    2. Another method of determining the network card in the computer is by physically looking at the network card. Many times the network card lists the manufacturer and part number on the actual card.
    3. If you cannot locate a manufacturer or model number of the network card, but can locate an FCC identification number, we recommend you perform an FCC search using that number. For additional information about FCC numbers, see our FCC definition page.

    Product listing or specifications

    If you’re trying to list all the specific information about your computer network card, specifying the manufacturer, type, model, and speed of the network card is sufficient. Below is an example of how this may look.

    Drivers or installation

    • Computer network drivers.
    • How to install a computer network card.

    Replacement or repair

    If you’re trying to determine the network card because it needs replaced or repaired, we recommend the network card be replaced with another network card. If you are replacing an old 10 MB network card, we recommend it be replaced with a 10/100 network card.