As summer approaches, pool owners everywhere begin thinking about when to open their pools for the season. They think about all the poolside parties, a good lap-swimming workout, and weekends spent lounging by the water, soaking up the sun.
Many times, maintenance is an afterthought, neglected until the walls turn green from slime or a filter gets clogged with leaves. However, waiting until problems arise can end up costing a lot more time and money than if you simply establish a good maintenance routine.
Perhaps you’re a brand new pool owner, or maybe you’ve owned a pool for years. Either way, it’s good to have a clear idea of how you’re going to keep the pool clean and well-maintained all summer long. The only way to do that is to ensure you have the bases covered with these tips and tricks.
Shock your pool the right way
If you’re a beginner, shocking doesn’t mean surprising your pool. Shocking means raising the chlorine levels for a little while to kill bacteria. It should be done at least twice a season or whenever the water looks murky, such as right after a big pool party.
But you need to do it right to avoid over- or under-chlorinating and to prevent damage to yourself, your pool liner, and filter. The best way to do shock is to dilute your concentrated chlorine by mixing it into a bucket of warm water. Mix it well to dissolve evenly while wearing protective gloves and goggles. Then pour it into your pool.
Be sure to only shock the pool at night, however. The sun burns off chlorine at about 1 ppm per hour, which reduces the effectiveness and wastes money. Shock at night for the best results. Just be sure no one will be doing any night swimming.
Become BFFs with your brush and skimmer
This should become like brushing your teeth, something you automatically do on a daily basis to keep things clean. Every day, you should be skimming leaves and debris from the water’s surface with a net skimmer.
If you have a little extra cash, robotic pool vacuums can be a big help in keeping the pool floor and sometimes the walls clean. We have some great options for the top robotic pool cleaners of 2021 here on our site. There are also suction-side and pressure-side cleaners that provide automated cleaning for a little less money.
However, you should always have this basic equipment on hand:
- a net skimmer
- a pool brush
- a manual pool vacuum
Automated cleaners, even those with smart tech, are only so smart. They won’t catch everything or be able to reach every corner and surface. You’ll need to manually brush the walls and pool stairs at least weekly, to dislodge stuck-on algae and debris that your automatic cleaner will miss.
The truth about pool pumps and filters
Ideally, your pump should be running 24 hours a day all summer long for the best filtration results. Not everyone’s budget and equipment can sustain that, however, but aim to run your pump at least 8 hours a day each day. Think of your pool pump having a full-time 9-5 job. That consistent circulation is the number one way to keep the water clean and healthy.
At least once a month, depending on how much debris your pool collects, you should backwash your filter. This means reversing the water flow and redirecting the water out of a waste port that flows out of your pool. The type of filter you have determines how you’ll backwash, but the end result is removing all the built-up dirt that can clog the pipes and other areas that you can’t clean simply by emptying the filter basket.
Don’t be intimidated by pool chemistry
Basic pool chemistry is really simple, but you have to stay on top of it so things don’t get out of hand. All you really need is a good water testing kit. Before you start throwing chemicals in the pool, test your water so you’ll know exactly how to adjust the chemicals without wasting time and money. There are 3 main things to test for:
- pH levels: How basic or acidic your water is on a 0 – 14 pH scale. Low pH means acidic (0 – 7), while high pH is basic. You should aim to keep your pool water within the neutral zone of 7.4 to 7.6.
- Alkalinity: a pH buffer that prevents spikes in acidity or basicity. Your ideal range should be 100 – 150 ppm.
- Sanitizer: Whether chlorine, bromine, or something else, this is necessary to kill bacteria and other microorganisms. Levels vary depending on what you’re using.
At least once a week, test your water with a good testing kit. Go slowly, follow all directions to the letter, and carefully adjust chemicals according to results. Once a month, collect a sample and bring it to your pool supply store. There, they should have high tech testing equipment that will give you an even more accurate picture of the chemical composition in your pool.
Call in the professionals
If you have any leaks, cracks or anything that you’re not able to easily fix as part of your maintenance routine, call a pool service professional to come take a look. Don’t wait, or the problem could get so out of hand that it’ll end up costing you a ton of money for a major repair.
Even though you may not see any problems or think it’s a waste of money, have a service professional come out once a year just to check everything and make sure it’s in working order. They may be able to catch things you’ve missed or offer tips for better maintenance or pool products.
The best time to do this is right after opening the pool for the summer.
Pool maintenance is a very important aspect of keeping the swimming pool safe. If not properly maintained, they can result in very serious infections and also cause health threats to the users. Humana in the surroundings can contaminate pools with organisms that are infectious.
These infections are potentially dangerous and can be serious at some point to cause serious diseases. Pools should be well maintained and checked frequently in order to prevent potential health risks to people that are using it. This can be done by killing harmful viruses and bacteria which cause infection. A pool should be frequently treated in order to remove contaminants such as skin hair or sunscreen that drop during swimming according to this article.
There are also other organisms that grow in water such as algae. Algae should also be controlled because it may cause skin, ear, eyes and nervous system infections and also digestive systems. They are small organisms that usually spread very fast. They form a greenish substance that floats in water. Presence of algae in your pool is an indication that the level of chlorine is not maintained. These microorganisms are usually passed animals and humans to the environment. Pool safety is very important. This article is designed to offer guidelines for home improvement of swimming pools.
Step 1 : the water supply
A pool should only be filled with treated water from domestic supply. This water may, however, contain an unsuitable level of PH that may be unsuitable for swimming pool use. High levels of PH concentration have high minerals that may interfere with your pool by causing stains, corrosion and scale. Regular chemical treatment and testing are important for the pool. Cloudy or dirty water means that the PH concentration is not within the recommended range and hence should be immediately taken care of. It is good to consult with a nearby health officer about the swimming pool water.
The pipes circulating water should be regularly checked to ensure that the water is circulating properly. In order to facilitate the efficiency of chlorine, it is important to know that the proper PH concentration ranges from 7.2 to 7.6.
Step 2: frequent water treatment
For a long period of time, swimming pool water remains in the pool. This is the main reason why pool water should be regularly checked and treated. Water contaminants such as soil, insects, can be removed by filtration. The chemicals being used on the pool should be used and handled with care and according to the guidelines of the manufacturer. Chlorine is the most commonly used disinfectant for home swimming pools. It should be used in standardized amounts according to the supplier’s instructions. A professional officer who knows the volume of the water in the pool can be consulted.
Use of chlorine ensures that that concentration of your pool is maintained. Bacteria can be killed by the use of a reasonable amount of chlorine. Treatment stabilizer can be used to ensure that chlorine poured into the water do not get consumed in large quantities. A pool supplier can be consulted about the number of stabilizers to be used. More chlorine can be used in heated pool water compared to non-heated pool water.
Step3: water filtration
In order to maintain a clean swimming pool, it is important to keep the water circulating. The chemicals that are added to the water in order to clean it will be effective if only the filtration is working efficiently. Filters that are commonly used include cartridge filters and earth filters. The volume of water in the pool should be efficiently filtered by the filters installed. A good system of filtration is the one that filters the water continuously.
Another important thing to note about swimming pool filters is that in order for them to function effectively, they require to be checked regularly to ensure that they are working. Filters should be kept in good condition. Pipes leading the water in the pool should be in proper conditions as well as motors kept in good working conditions. Covering the pool is also a good remedy for filtering out leaves, soil, minimizing mosquito breeding and also plays an important role in preventing loss of water through evaporation.
Step 4: regular testing
A concentration of the swimming pool water should be regularly tested for chlorine and PH. When the pool has been used by many people or experienced heavy rains, it is important to test and understand the quality of the water to avoid disasters from happening. During testing, reliable test kits should be used. Testing is important so as to maintain the normal concentration of the pool. The objectives of testing can also be done by salt chlorinators of the pool. This involves putting a reasonable amount of salt into the pool. This salt produces chlorine while passing through water. However, the operation of salt chlorinator requires professional instructions and guidance as this is most important ever to a number of people.
Step 5: safety of the pool
Swimming pools safety is a very important aspect of ensuring confidence when enjoying swimming. A pool owner should provide open instructions on those using the pool. There should be restrictions on those who do not how to swim unless there is a guide. Children should also be monitored closely. Pool surfaces that are broken should be mended. Swimming pools should be regularly cleaned in order to remove debris that may make the pool slippery. It is also important to ensure that all electrical equipment used around the pool is in a good condition. Open electric circuits can cause serious injuries and even lead to death.
A swimming pool should be well maintained and serviced to avoid contamination. Important guidelines to follow in order to maintain a good swimming pool for your home includes chlorination, filtration, maintenance of a good range of PH concentration, the safety of the pool, proper water supply and regular testing. It is important to hire a privately licensed pool supplier with knowledge of pool chemicals for assistance.
Owning a swimming pool is a lot of fun but it comes with big responsibility too. In the same way that your car needs regular upkeep to be at its best, so does the pool. Having a solid understanding of how all components work and how to best care for it, will keep it in the best shape all year. Regular maintenance is as simple as three C’s: Circulation, Cleaning, and Chemistry. Setting a schedule around these three concepts is the best way to care for your pool.
How to Properly Maintain Your Swimming Pool?
Water that is stagnant collects algae and turns cloudy, moving water is clean. To keep everything safe and health, proper circulation is essential. Ideally, run the pump continuously. But, we understand this may not work for your budget. If possible, aim to run the filter and pump for 10 to 12 hours a day. Doing this will turn the water over a few times to maintain safety and cleanliness. Try to backwash your filter as well, which involves reversing the water flow to push out dirty water.
This task is much easier when there is good circulation. With a little elbow grease and the right tools, it will not be as big of a chore as you might think. Make sure there is:
- A net skimmer
- A brush
- A vacuum
It will get dirty naturally from people using it and from leaves and debris blowing in. Then consider the dangers of algae and it is clear how important cleaning is. Plan on brushing, skimming, and vacuuming weekly to remove debris and keep the walls sparkling. For stubborn stains or algae, use baking soda paste as a basic scouring agent that is delicate on vinyl liners and tiles. Note that with an in-ground pool, the drains will help pull water to the filter and this makes everything easier. Above-ground pools do not have these so a vacuum is the best tool for getting all surfaces thoroughly clean. Just make sure the vacuum is upside down before turning it on to better clear out the cloudy water.
A must-have tool for maintenance is a water testing kit. Pool owners are aware that chemicals are necessary for keeping the water clean but before reaching for the chemicals, test the water first. The three most important parts of water chemistry are:
- Alkalinity works as a pH buffer to prevent acidity or basicity spikes. Aim for a range between 100 and 150 ppm.
- pH levels which indicate if the water is basic (high numbers) or acidic (low numbers). Ideally, the water needs to be between 7.4 and 7.6.
Sanitizer levels refer to the amount of chlorine or bromine and the level will depend on which type of agent is being used. Reach out to us if there are any concerns on chemical levels. All of this may take time, but by following this routine you will make sure your pool is clean and safe, so everyone can focus on fun.
*If you want to find out about the best hot tubs, check out this link.
An in-ground pool in your backyard offers leisure, entertainment, opportunities to exercise, and increases your home’s value.
According to the National Association of Realtors, an in-ground pool adds your home value by about 8%.
Thus, it is advisable to take great care of this valuable addition to ensure it stays clean and healthy.
Here is how you should care for and maintain your swimming pool.
Take Care of the Circulation
Proper care for your pool begins with pool circulation. The pump, filter, jets, and skimmer make up your pool’s circulatory system. If any of these parts are impeded, the quality of water will deteriorate.
The pump is regarded as the heart of your pool. If the water in the pool is stagnant, then the pump must be faulty or the filter is not working.
The more you run the filtration system, the cleaner your water will be.Furthermore, stagnant water is a popular breeding ground for algae.
For most people, running the pump for 24 hours may sound unrealistic; thus, it is recommended that you run it for about 10 and12 hours each day. Always backwash or clean the filter from time to time usually, if the pump gauge reads 10psi above the standard, which is usually about 10 and 15psi.
Cleaning the skimmer and pump basket is essential for overall pool maintenance. Clogged baskets make it harder to pump water. This in turn, stresses the seals and decreases the lifespan of your pump.
Frogs may get stuck in the clutter; hence, you would want them removed in good time. Another straightforward adjustment is to ensure that your pool jets point away from the skimmer to ensure that the water cycles in a circular manner. This encourages the pool water to rotate and enables the skimmer to get rid of debris.
Normalize Thorough and Regular Cleaning
Cleaning is also a necessary action for proper pool maintenance. Brush or skim once each day, and vacuum every week. Scrub the walls with a brush to prevent algae formation, scaling, or staining. Also, buy a net or leaf rake to use while skinning on the pool’s water surface to remove large floating debris.
Benefits of Installing A Backyard Swimming Pool
some pool fun ideas to consider
Vacuuming is yet another essential part of cleaning the bottom of your pool. It helps remove debris that blocks water circulation or damages your pool. Pool resurfacing in Winter Green, or in a location near you, can give your pool a new surface appearance by sandblasting or hydro blasting, or bond coating, which are jobs best left to resurfacing professionals.
Check Your Pool’s Chemistry
Observing your pool’s chemistry is a vital part of proper pool care. It helps keep your pool water clean. If your water is balanced, you are less prone to deal with issues, such as green water, cloudy water, or the accumulation of harmful bacteria.
For good results, test your water each week. Some testing kits tell you what you need to add to maintain the balance at optimum levels.
The essential ranges to keep in mind are:
- An ideal pH of about 7.5 is neither too high nor too low pH levels to encourage corrosion or increased algae growth.
- Ideal Calcium hardness should be about 200 – 400 ppm. Low levels of calcium hardness may damage your pool’s vinyl liner or plaster finish. While very high levels of calcium hardness will form deposits of calcium on the walls and floor.
- Alkalinity of about 120 and150 ppm is vital. If it goes beyond this range, the water may become cloudy, and if it falls below this range, your swimming pool’s surfaces are more susceptible to staining.
- Chlorine is typically available in tablets, granules, or sticks. It helps break down harmful bacteria and also sanitizes the pool water. Always ensure that chlorine levels are stable to ensure that the water remains clean.
- Very high phosphate levels in your pool may make your water appear green or cloudy and can as well lead to increased algae growth.
- Also, normalize overloading the pool with a sanitizer every fortnight to kill any bacteria, organic matter, or excess contaminants, commonly referred to as pool shocking.
other related articles of interest:
Follow the basic above-written guidelines for proper pool care, and you will always have a health and crystal-clear pool. The key takeaway is establishing a routine and taking action as soon as you notice any discoloration, scaling, or cloudy water. Your goal is to maintain your swimming pool for year-round enjoyment.
Most families nowadays decide to buy a large swimming pool and out it right there in their garden or yard. With this, they have no need to go out and look for another pool that is public. But, once when you add a swimming pool in your own garden, you must learn how to keep the water clean. This is why you should learn how to maintain your swimming pool and you will learn in the post that follows now.
When you buy a swimming pool you also need a filter pump that will help to keep your water crystal clear. The process of cleaning the water is called backwash and the water is circling with the aim to give you clean water back again in the pool.
Identify pool water pH
You must understand the need for your pool. Pay attention to water pH, total alkalinity, chlorine, cyanuric acid, calcium hardness, and total dissolved solids levels. Learn these level ranges:
pH: 7.2 – 7.8
Total alkalinity: 80 – 120 ppm
Chlorine: 1.0 – 2.0 ppm
Cyanuric Acid: 40 – 80 ppm
Calcium hardness: 180 – 220 ppm, though some say 200 – 400
Total Dissolved Solids: below 5000 ppm
Test chlorine twice a week
The third thing to do is to test the water in the pool. Make a test about water chlorine even twice a week, if you can. If don’t, do this at least once a week. You can buy a test in almost every store so not just the chlorine you can also test the chemicals in the water.
Photo via www.freebiemom.com/
Add chlorine tabs in the pool
You must buy chlorine tabs in the pool and clean it deeply the water. These tabs are cheap and you can buy in every store.
Photo via www.webshop.swimmingpools.be
Clean the pool manually and do this every day
You can’t keep your swimming pool clean just with tabs but you must clean it daily and do this manually. This is how yo will keep the water crystal clear so now you can swim with hours, so do your kids can swim too!
Photo via www.toolsreviewss.com
Go now and swim in your swimming pool and enjoy in the hot water there! You don’t need vacation but you need pool like this!
Did you recently buy a house with a swimming pool but don’t know how to maintain it? Swimming is a great exercise that works the entire body. Not only will it build endurance, but it’ll also strengthen your lungs and heart. The best part is that it’s a low-impact workout. In other words, it puts minimal stress on the joints. This makes it ideal for those who have osteoarthritis or similar conditions.
If so, if this is something you’re interested in, we invite you to continue reading for an easy guide about to how to maintain your swimming pool.
Maintain Your Swimming Pool with This Easy Guide
Regular maintenance is a must when it comes to swimming pools. Neglect it for a few weeks and algae will begin to grow. Not to mention that it can become a hotbed for bacteria!
On top of that, it actually damages your pool. For example, metal parts such as screws or ladders will corrode without the right maintenance. There might also be staining or chipping of the surface.
• 4 Pool Care Tips That You Should Know
Want your pool to be sparkly clean? Here are a few things to keep in mind.
1. Vacuum the Pool
As a general rule, you want to vacuum your pool at least once a week. Make sure to work slowly so that you get the entire bottom surface.
Not only will it keep the water clear but it’ll also make your chemicals work more efficiently. On top of that, it helps control algae growth.
2. Maintain the pH Level
Make a habit of testing your pool’s pH levels. Generally speaking, you want it to be between 7.2 and 7.8.
You don’t want it to be too alkaline as that can cause various issues. For instance, it can lead to calcium buildup in pool. It also reduces the effectiveness of chlorine, which results in bacteria growth.
3. Clean the Filter
Check your pool filter regularly. How can you tell whether or not it’s time to clean the filter? Chances are, there will be obstruction in the drain at the bottom of your pool. There might also be an abnormal odor.
4. Check and Maintain the Water Level
Make sure to check and maintain the water level. You don’t want it to fall below the level of the pool skimmer, otherwise, it will damage the pump.
Consider adding more water if the level is low. Don’t add too much, though because that also causes problems with the skimmer.
• Taking Care of a Pool
As you can see, there are several things to do when it comes to maintaining your swimming pool. So, follow these tips for the best results all summer long. Doing so will ensure uninterrupted summer fun for you, your family, and friends.
If you have any questions, please leave them in the comments below. You will also find other interesting links below for all things design.
The fall is a popular time for homeowners to pursue inground swimming pool installation, allowing them to make the most of their new pool as soon as the temperature warms up in the spring. Whether you are interested in inground or above ground swimming pools, installation is only the beginning of the process for new pool owners. There are many important maintenance steps to follow to keep your pool in good condition. Plenty of maintenance tools can be purchased in the fall and winter to support your new pool throughout the cold months and prepare it for the upcoming spring and summer.
A swimming pool heater can help extend your pool use into the spring and fall, especially for Canadian pool owners. Following your inground swimming pool installation, you may want to purchase a water heater to help you use your pool earlier in the spring. A variety of energy-efficient and high-performance swimming pool heaters are available through the Seaway Pools & Hot Tubs online store.
Although it may seem like a simple accessory, a thermometer can actually help you get the most out of your pool. Whether you choose to heat your pool or not, a thermometer can help you keep track of the temperature and make an informed decision about when your pool is ready to be opened in the spring. Your thermometer will also help you assess the pool temperatures that you prefer for swimming.
Water Chemistry Test Kit
Inground and above ground swimming pools both require regular water chemistry maintenance to ensure the pH is balanced and the sanitizer levels are stable. With a home water test kit, you can carefully monitor your water chemistry to ensure you are protecting your equipment from corrosion and your family from illness. Many pool and spa stores, including Seaway, offer free water quality testing on-site. Simply bring in a sample of your pool water and an expert technician will help you determine what products you need to maintain your water.
Sanitizers and Shock
Following inground swimming pool installation, you will want to prepare your pool for the winter and ensure you have the appropriate chemicals ready for it to be used in the spring. This includes both sanitizers and shock, which help to kill algae and bacteria in your pool.
At Seaway Pools & Hot Tubs, we offer inground swimming pool installation year-round in the Greater Toronto Area. The fall is the perfect time to install a new pool in your backyard so you can use it as soon as temperatures warm up in the spring. For inground and above ground swimming pools, the Seaway online pool supplies store has everything you need for regular equipment and water maintenance. Most of our supplies can be ordered for curbside pick-up and we offer professional closing services to make sure your pool is properly protected for the winter. For more information or to get started with your inground swimming pool installation, contact the Seaway team today at 905-294-8030 (Markham) or 905-853-8500 (Newmarket).
Winterizing the Pool / Getty Images
As lovely as in-ground pools sound, they’re not always feasible to install in the backyard, whether it’s because of the cost, the space available, or the type of soil in the back. An above-ground pool, however, could be an option for enjoying the water during warmer months.
Above-ground swimming pools range from economical models to more luxurious (and expensive) styles. Many can be enjoyed throughout the year, and some use saltwater systems, which are popular with in-ground models. Above-ground pools also have options for solar heating systems and energy-efficient covers.
Contemporary models may have upgraded features that are usually seen in in-ground models, including advanced filtration systems and pumps to keep them clean. However, even above-ground pools that have built-in systems need a little hands-on work regularly to stay clean and in good working condition.
Follow a Maintenance Checklist
Petegar / Getty Images
” data-caption=”” data-expand=”300″ data-tracking-container=”true” />
Petegar / Getty Images
It’s tempting to put off above-ground pool maintenance, but you will pay for it later through water problems or pool liner issues, which are expensive to fix. To ensure that you’re taking proper care of the pool, follow a daily and weekly pool maintenance checklist.
Complete these tasks daily:
- Test the pH level to ensure it’s between 7.4 and 7.6.
- Test the chlorine level, which should be between 2.0 and 4.0 ppm.
- Run the pool filter for 12 to 18 hours.
- Check the water level, which should be around mid-skimmer.
- Empty the skimmer and pump baskets.
- Check filter pressure and pump operation.
Once a week, complete these tasks:
- Test total alkalinity to make sure it’s between 80 and 120 ppm.
- Skim the surface, vacuum, and brush the pool.
- Properly dose with algaecide, clarifier, and metal control.
- Clean the pool deck and surrounding area.
- Add chlorine tablets.
- If the pressure gauge rises 7 to 9 psi, backwash or clean the filter.
Ensure Water Circulation
” data-caption=”” data-expand=”300″ data-tracking-container=”true” />
Vladimir Vladimirov / Getty Images
Above-ground pools have issues with water circulation, which can allow algae to breed. This is particularly evident in the dead spots of the pool, which typically have bad circulation, including behind ladders, around steps, under the skimmer, and in any cracks, crevices, or creases.
The pool’s pump circulates the water, but sometimes it doesn’t do a great job in these dead spots. You can improve the situation by installing return jets that are multi-directional but keep a pool brush on hand to manually circulate water, too.
Don’t Forget About the Walls
” data-caption=”” data-expand=”300″ data-tracking-container=”true” />
The pool walls need care just as much as the water inside of them. Avoid letting guests sit on the edges or the top rail of the pool, which can cause damage and crease or crack the sides.
Other hazards that could hit the walls of the pool include falling tree branches and kids that are throwing objects or riding bikes around the pool.
Winterizing the Pool
Stefan Cristian Cioata / Getty Images
” data-caption=”” data-expand=”300″ data-tracking-container=”true” />
Stefan Cristian Cioata / Getty Images
If you don’t use the pool for the entire year, it needs to be winterized at the end of each swimming season. This includes:
- Cleaning the pool thoroughly, and adding a winter chemical kit to the water.
- Removing chemicals, cleaning supplies, and the pool’s ladder to store in a safe, dry area.
- Running the filter for one hour before disconnecting the motor and pump, also to be stored in a safe, dry place.
- Lowering the water level to below the return and skimmer. Don’t drain the pool entirely, as it can be damaged by hydrostatic pressure.
- Adding pool anti-freeze—not automobile anti-freeze—to the plumbing and installing threaded winter plugs to keep water out of the pipes.
- Covering the pool with a winter cover.