How to paint eaves

The eaves on a roof are used for many different purposes. First, the eaves help to manage the rainwater system of the home. They are used in conjunction with the gutters and downspouts to channel the water away from the home. Second, the eaves help to allow the excess air to escape through the eaves from the attic. Without proper attic ventilation, the heat and humidity will accumulate and eventually filter into the living space. This will inevitably increase the cost of your electricity during the warm summer months. Another part of your home maintenance plan should include keeping your eaves in tip-top shape. Below you will find instructions on how to properly paint the roof eaves.

Step 1 – Clean the Eaves

Pull out a ladder that will touch the eaves. Find a spotter that can help you hold the ladder and climb the ladder in order to get to a point where you can properly touch the eaves. Take a bucket of warm soapy water and a dry cloth with you. Proceed to wash the eaves free of all dirt, grime, and grease. Once you have fully scrubbed the eaves, take a pressure washer or a hose and rinse completely. Make sure you take off all the dirt.

Step 2 – Allow to Dry

You need to allow the eaves enough time to dry. If you are working on a sunny, warm day then they may dry in an hour or so.

Step 3 – Pick a Paint

Pick an exterior paint that you can use on your eaves. If your eaves are constructed with metal, then you need to pick an exterior paint that will cover metal. If your eaves are wood, then pick an exterior paint that will adhere to wood and that is suitable for the exterior.

Step 4 – Sand

Sand any peeling or chipping paint. Use sandpaper that works with metal if you are sanding the chipped paint on the metal eaves. Use a sandpaper that is suitable for wood if chipping over your wood eaves.

Step 5 – Paint

Using a roller and a brush, carefully paint the eaves on your house. You may need to apply two coats depending on how well the eaves are covered by the coat of paint. Rolling and painting work better than spray paint. It will last longer and look much more professional. If paint gets on other parts of your home, make sure you remove the paint before it cures.

Step 6 – Seal

Add a sealer to the exterior of your eaves to extend the life of your paint job. Make sure that you apply an even coat of the sealer using a different paintbrush and roller. Wipe off any sealer that gets onto other parts of the house while you work to coat the eaves.

How to paint eaves

Generally, the elements have a deleterious relationship to exteriors, causing wear and damage that can end in costly repairs. Exposure to weather does, however, have one very positive effect: cleaning your surfaces naturally. The few exterior elements of your home that never benefit from that cleaning effect are the shaded spaces under your eaves, where dirt, grime, pollution, and—most importantly—sulfur dioxide accumulates.

You can’t get away from sulfur dioxide: it’s in the air. And what sulfur dioxide does that you need to know about is this: it leaves tiny, salt-like crystals on exterior surfaces. Those crystals are, unfortunately, rather problematic—particularly when they’ve been lingering under your eaves for a long time. If you’re looking for a reason why the paint in those protected, shady places are peeling, a good first suspect is improper surface preparation. If those salt deposits from the air weren’t removed prior to coating, it’s no surprise that your paint has started to peel.

To take a short, science-based detour: your paint peels because the crystals draw moisture through the top coat, roughly the same way salt draws moisture into a piece of poultry. When that happens with chicken, you have a succulent bird; when it happens with paint, you get peeling and blistering—unlike poultry, paint should never be moist under the surface. So what do you do if the damage is already done? How do you deal with paint peeling under your eaves?

A good solution is perhaps an obvious one, but we’ll say it anyway: repaint. But before doing that, you need to remember a few things to ensure a strong, long-lasting finish.

First, clean the area you’re looking to repaint and let it dry. Second, scrape off any peeling paint and sand the surface down to the substrate, making sure to wipe it down and ensure that no dust from the sanding will get under your finish. Finally, before repainting, use a high-quality primer. Then apply your topcoat.

Once your paint job is finished, just keep in mind that nothing is naturally cleaning the space under your eaves. If you want to maintain your smooth new topcoat, occasionally spray it down with a hose, and remember that those protected parts of your exteriors need, if anything, a little extra attention from time to time.

How to paint eaves

Every house deserves a new fresh paint after a number of years. Depending on what you are comfortable with, you can decide to paint your two-story house yourself or have it done by a professional painter.

However, if you decide to paint your house the DIY way, painting the eaves might be one of the trickiest parts you will be dealing with because they are off guard and often difficult to reach. You will have to make sure your ladder is stable enough and you also have to be careful not to slide and fall

It’s always a good idea to have a friend by your side to help. Before you begin, make sure you have all the tools you need to accomplish this task which include; drop cloths, tape, paint tray, paint roller and refills, a ladder and small brushes.

You should also minimize climbing the ladder up and down unless when it’s absolutely necessary. This helps you to save your energy –painting can drain most of your energy especially if you’re painting in awkward places such as the eaves.

How to paint the eaves of your two-story house;

1. Clean your eaves;
Use a power washer to clean the eaves, ensure that the surfaces you’re planning to paint look clean. Point your power washer towards your eaves, start spraying from the top of the eaves coming down and make sure your hands are steady. Check to see that the surface is clean and no debris is left. Be sure to cover your eyes with protective glasses and avoid pointing the nozzle towards your windows. The high pressure from the power washer might damage your windows.

If you don’t have the power washer, you can wash your eaves with a bucket of water, some soap, and a bristle brush, but this option will take longer, much longer.

2. Make sure your ladder is in the right position;

Grab yourself a twenty-foot extension ladder on top of your first story building and use it to reach to the top. Your ladder should not reach three feet beyond the eaves, lean the ladder on stable fixtures. If your ladder is not that long you can use ladder stabilizers to support you, confirm if the stabilizers are strong enough to hold your weight.

When you have finished painting the small portions, move your ladder to other sections and don’t reset the ladder, this gives you an easier time with reaching the portions you want to paint. Instead of carrying one tool at a time you can put all the essentials in a bucket and hang them on a stable hook on the ladder.

3. Remove the old paint in your eaves with a wide putty knife;

Use your wide putty knife to scrape off the old paint, a narrower putty knife can also be essential when scraping off the corners. You don’t have to scrape off all the paint from the wood. Start by scraping the most noticeable ones. Also, remember to tape the places you’re not painting to make your work look much neater.

4. Apply the paint

Paint the eaves using quality exterior paint, while standing below the top three rungs of the ladder. Standing any higher might cause you to lose stability.

Pro painting tips;
• Choose the right paint; Latex and water-based paints are the best paints because they emit lesser fumes, tend to dry faster and also give you an easier time when cleaning. Additionally, choose the best finish for your paint.
• Prime when you need to; if you’re covering dirty stains or painting drywall, a primer will be necessary. In fact, the primer is almost always necessary in any exterior painting situation. It helps you reduce the number of coats you will need to paint, block stubborn stains and improve paint adhesion.

The Bottom Line

Painting the exterior of a two-story home can be quite a challenging task. Painting eaves of such houses particularly puts you in a precarious position with plenty of room of accidents and injuries. If you don’t have the training, experience, and tools to handle such tasks, you highly recommend that you hire a professional painting contractor like Sir Paints A Lot.

At Sir Paints A Lot, we specialize in residential painting and guarantee a high-quality paint job using the best paint products in the market. To give us a try, simply call us on 541-600-2025 for a free estimate.

Updated: April 2021

Change cost factors, combine homewyse items and add items you create – in a resuable pricing app customized to your business. Start with a popular templates below or build your own (free; Account sign up required):

Interior Painting
Exterior Painting
Drywall, Tape and Texture
Residential Electrical
Handyman
See all Templates
Cancel

For a basic project in zip code 47474 with 120 square feet, the cost to Paint a Soffit starts at $3.64 – $7.54 per square foot*. Actual costs will depend on job size, conditions, and options.

To estimate costs for your project:

1. Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased.

2. Specify Project Size and Options Enter the number of “square feet” required for the project.

3. Re-calculate Click the “Update” button.

NOTE: *Input the total of the finished surface area AND the area of any openings enclosed by the finished area.

Unit Costs: How Pros Price

Unlike websites which blend pricing from dissimilar jobs, Homewyse creates custom estimates from Unit Costs. The Unit Cost method is based on job specific detail and current costs. Contracting, trade, design and maintenance businesses rely on the Unit Cost method for transparency, accuracy and fair profits.

Cost to Paint a Soffit – Notes and General Information

These estimates are for BASIC work performed in serviceable conditions by qualified trade professionals using MID GRADE materials. Work not mentioned on this page and/or work using master craftsman, premium materials and project supervision will result in HIGHER COSTS!

These estimates are NOT substitutes for written quotes from trade professionals. Homewyse strongly recommends that you contact reputable professionals for accurate assessments of work required and costs for your project – before making any decisions or commitments.

The cost estimate includes:

  • Costs for local material / equipment delivery to and service provider transportation to and from the job site.
  • Costs to prepare the worksite for Soffit Painting, including costs to protect existing structure(s), finishes, materials and components.
  • Labor setup time, mobilization time and minimum hourly charges that are commonly included for small Soffit Painting jobs.

The cost estimate does NOT include:

  • Costs for removing, relocating, repairing, or modifying existing framing, surfacing, HVAC, electrical, and plumbing systems – or bringing those systems into compliance with current building codes.
  • Costs for testing and remediation of hazardous materials (asbestos, lead, etc).
  • General contractor overhead and markup for organizing and supervising the Soffit Painting. Add 13% to 22% to the total cost above if a general contractor will supervise this project.
  • Sales tax on materials and supplies.
  • Permit or inspection fees (or portion thereof) required by your local building department for your overall project.

References – Soffit Painting

  • Product and Supplies Data: Home Depot Paints, Stains and Supplies Home Depot, Apr 2021, Website
  • Product and Supplies Data: Lowes Paints, Stains and Supplies Lowes , Apr 2021, Website
  • Product and Supplies Data: Menards Paints, Stains and Supplies Menards, Apr 2021, Website
  • Product and Supplies Data: Exterior Paint and Supplies Catalog Do It Best, Apr 2021, Website
  • The HUD PATH Rehab Guide Volume 2: Exterior Walls U.S. Department of Housing and Urban Development Office of Policy Development and Research, Mar 2011, Editorial Staff
  • The Building Estimator’s Reference Book , Mar 2012,
  • Home Improvement 1-2-3: Expert Advice from The Home Depot Homer, TLC, Apr 2021, Editorial Staff, ISBN 696213273
  • Carpentry and Building Construction, Student Text Glencoe/McGraw-Hill; 6th edition, Jan 2003, Mark Feirer, John Feirer, ISBN 007822702X

Hiring Local Professionals

Our FREE homewyse hiring guide helps you locate and hire great help, get quality craftsmanship and understand fair pricing on your specific project.

Make Homewyse better

We’re a cooperative community that values and depends on your input. So, let us know – how can we improve this site? Would your friends and online contacts benefit from homewyse information? Make homewyse better for everyone – send your feedback or share this page. Many thanks!

  • Send your feedback or questions.
  • Save and share Homewyse on social media using the buttons below:

Installing the Under Roof: Simple and Effective

There are many ways to personalize a roof: roof finials, mantling, PVC or wooden under roofs, eaves or roof paint. There are many possibilities for those who want to embellish their home.

How to paint eaves

It is possible to create a perfect harmony between the woodwork of a house, cladding and the under roof. Thus, the under-roof can be, like the joinery:

– Wooden (panelling, shuttering board, etc.):

◦ can be painted in the desired colour, in harmony with the rest of the house;

◦ charm and naturalness.

– Made of PVC:

◦ resistant: long life;

◦ very light: easy to install;

◦ available in various colours.

A clad roof overhang gives a more aesthetic appearance and also helps to limit heat loss in attics. In addition, you can lay a layer of insulation under the eaves.

You can install the under roof perpendicular to the wall or parallel to it. The under roof is laid on a piece of wood:

– either directly on a rafter of the roof structure;

– or on an added batten or board.

How to paint eaves

With a few simple tools such as a hammer, tape measure and level, you can make your own under-roof. The installation steps are detailed in the table below:

Installing the support

– Draw a straight line on the top of the wall at the same level as the bottom edge of the gutter.

– Check the level.

– This straight line serves as a base for a board that will be fixed flat to the wall.

Place the ends of the formwork

– Make two wooden triangles that close the formwork.

– Fix them with screws.

Measure, cut and fix the wooden boards (panelling, etc.)

– Lay the first board cut a little longer than necessary:

◦ by nailing in longer boards, you will be able to create an even finishing level in the end.

◦ this installation can be done with screws, staples or small-pointed nails.

◦ the nail heads can be driven under the wood and the holes filled with paste.

Carrying out the levelling

– Use a space-saving blade saw for wood, as the stroke length is quite short.

– It is possible to hide the cut wood by nailing a wooden angle.

– Apply a fungicide stain or varnish to the wood.

– A paint in the same colour as your woodwork can also be applied.

PVC under roof installation: a simplified technique

The steps involved in installing PVC under roofs are reduced thanks to new installation techniques:

Fixing the batten to the masonry.

Fixing the edge profile to the masonry.

Fixing the fascia to the rafter ends: it is essential to check the alignment.

Cutting the infill profiles leaving a gap. This gap allows the profiles to expand.

Fixing on the tongue side using:

– or stainless steel screws.

Returns are easy to make using a joining profile.

The planks are installed perpendicular to the façade.

You can further install a screen with an insect screen to prevent insects from entering the room. This will also allow optimal ventilation of the underside of the wall: it is installed with clips.

Note: You can also provide for the installation of spotlights during the installation.

Do you want to know more? Get in touch with roofing professional s in Simcoe County . They’ve been taking care of properties for over 25 years, be it Flat Roofing, Shingles, Skylight systems, Eavestrough Installation, Soffit Installation , Roofing Repair, or Roofing Maintenance.

How to paint eaves

Some home remodeling projects are just too huge to take lightly, and house painting is one of them. So adopt a steadfast mentality, prepare your weapons, steel yourself as if going to war, and most of all, relax and have fun (if possible).

Here is how to paint your own house, all the while keeping your sanity intact and delivering good work in the process.

Each Side of the House Is a Project Unto Itself

Do not think: I’m going to paint the entire house now.

Instead think: I am going to paint this one side of the house now. Consider one side of the house a project and ignore the other sides for now.

Do the Hard, Boring Parts First

Hard and boring parts are places like under the eaves. Fun places to paint are the most visible areas.

Psychologically you will run into trouble if you paint all the fun stuff first. You begin to think that the work is basically finished. Then, when you move to those hard, boring areas, they feel like twice as much work. So, get those under-the-eaves-type places out of the way first.

During boring stretches, sometimes give yourself a carrot at the end of the stick. Say to yourself: If I finish this section, I get to do that more interesting area of the facade for a while.

Flat Finishes Can Make Your Work Easier

Flat or satin finish paint? This is a tough call, as both have advantages.

Satin finish exterior paint is easier to clean, due to its light sheen.

But one great thing about flat exterior paint is that you can pick up again on painting any time after you have taken a break, no overlapping seams visible.

On the Extension Ladder, Paint Whatever Is in Reach

If you are on a 16′ extension ladder, it can be quite time-consuming to go up and down and move it every few minutes.

For that reason, paint as far as you can comfortably and safely within reach while you are on top of the ladder, rather than following some pattern dictated by the house’s architecture.

Again, this is where flat finish paint comes in handy. When you have to return to those painted areas later, it’s easy to blend your new work in.

Paint Sprayer vs. Brush? Your Conclusion Might Be Wrong

With cheaper paint sprayers on the market now, homeowners automatically assume that spraying their house will be faster and better than brushing and/or rolling. Not so.

Paint spraying necessitates an incredible amount of prep work: every square inch not to be painted must be masked.

Not only that, you need to tarp five or more feet beyond the house (likely farther). In a strict accounting of time, sometimes brushing and rolling comes out ahead of spraying.

Pick Your Battles Well

Make the highly visible areas perfect. These are places like: around the front and back doors, the entire facade, etc.

Other places, like under the dreaded eaves, may not require the same level of tender loving care.

Do Not Make Paint Do the Work of Patching/Sealing

Before actually dipping a brush into the paint and smearing it on your house, you first need to prepare the house by patching and sealing it.

Yes, paint can work minor miracles, such as drowning pin-size holes or filling in hairline cracks. But that is about all.

You run into problems when you try to goop in too much paint and expect it to do the work of caulk or wood filler.

Pick the Right Season for Painting Your House

Should you decide to start painting the outside of your home in the wrong season, you will continually be fighting the elements.

Even if you are in a “right” season for painting, you will be working against the clock and calendar to finish.

Use Every Possible Step, Even the Smallest

Reaching on the tips of your toes to swat a fly is one thing. But when you are on your toes to paint an entire 22′ long section of your home, the work–and potential for injury–adds up by the minute.

Later that evening you will be clutching your back in pain. Instead, use a step whenever possible to avoid painting far over your head.

Look for These Qualities in a Professional Painter

How to paint eaves

When you plan to paint the exterior of your home, a paint sprayer can help you get the job done more quickly. It will also create a smooth and even finish that looks great. That said, it is important to understand how to get it done. Continue reading to learn how to use a paint sprayer on your exterior.

Start by Cleaning the Exterior

The first step is to power wash the exterior of your home. It doesn’t matter what your home is made of; power washing will remove any dirt or debris, as well as any loose paint. This will prepare the surface so that the paint can adhere to it. You should let the siding dry for a few days to make sure that it is completely dry before you paint.

Prepare the House for Painting

Next, you will want to prepare the house for painting. You should start by priming any exposed wood and fix any damaged areas. Cover light fixtures and protect any bushes nearby by covering them in plastic.

Get your paint sprayer ready as well. If you haven’t used a paint sprayer before, you can test it out on a large piece of cardboard. This will help you get a feel for the sprayer before you use it. Hold it at least 12 inches away from the surface and keep it parallel to the surface.

Start with the Eaves and Trim

It is a good idea to start by painting the eaves and trim. This way, you won’t damage your paint job. Make sure that you put the tip on for the direction you plan to spray, and make sure that it isn’t windy outside. Start with the eaves and then you can spray the trim, including the trim around your windows.

Paint the House

Now you can paint the house. Wait for the trim to dry, and then use painter’s tape to protect it with plastic. For the siding, most people recommend that you use the 515 tip that comes with the sprayer. It will give you coverage and it works great for latex paints.

When you start, begin at the top of your home and work down from there. You can start out on a ladder and paint in wide sections before moving the ladder over to the next section. Make sure that you do the entire width so that the paint doesn’t dry. You should point the spray gun up and then go at an angle towards the bottom of the row you are working on.

If you notice any drips, you can even them out with a paintbrush and then return to spraying. Keep going until your entire house is finished. Once you finish, let your house dry completely and then you can remove the plastic and the painter’s tape.

Final Words

Spray painting your home is a rewarding project. It can completely transform the exterior of your home. When you have a spray gun to do the work, it takes less time and looks great.

Installing the Under Roof: Simple and Effective

There are many ways to personalize a roof: roof finials, mantling, PVC or wooden under roofs, eaves or roof paint. There are many possibilities for those who want to embellish their home.

How to paint eaves

It is possible to create a perfect harmony between the woodwork of a house, cladding and the under roof. Thus, the under-roof can be, like the joinery:

– Wooden (panelling, shuttering board, etc.):

◦ can be painted in the desired colour, in harmony with the rest of the house;

◦ charm and naturalness.

– Made of PVC:

◦ resistant: long life;

◦ very light: easy to install;

◦ available in various colours.

A clad roof overhang gives a more aesthetic appearance and also helps to limit heat loss in attics. In addition, you can lay a layer of insulation under the eaves.

You can install the under roof perpendicular to the wall or parallel to it. The under roof is laid on a piece of wood:

– either directly on a rafter of the roof structure;

– or on an added batten or board.

How to paint eaves

With a few simple tools such as a hammer, tape measure and level, you can make your own under-roof. The installation steps are detailed in the table below:

Installing the support

– Draw a straight line on the top of the wall at the same level as the bottom edge of the gutter.

– Check the level.

– This straight line serves as a base for a board that will be fixed flat to the wall.

Place the ends of the formwork

– Make two wooden triangles that close the formwork.

– Fix them with screws.

Measure, cut and fix the wooden boards (panelling, etc.)

– Lay the first board cut a little longer than necessary:

◦ by nailing in longer boards, you will be able to create an even finishing level in the end.

◦ this installation can be done with screws, staples or small-pointed nails.

◦ the nail heads can be driven under the wood and the holes filled with paste.

Carrying out the levelling

– Use a space-saving blade saw for wood, as the stroke length is quite short.

– It is possible to hide the cut wood by nailing a wooden angle.

– Apply a fungicide stain or varnish to the wood.

– A paint in the same colour as your woodwork can also be applied.

PVC under roof installation: a simplified technique

The steps involved in installing PVC under roofs are reduced thanks to new installation techniques:

Fixing the batten to the masonry.

Fixing the edge profile to the masonry.

Fixing the fascia to the rafter ends: it is essential to check the alignment.

Cutting the infill profiles leaving a gap. This gap allows the profiles to expand.

Fixing on the tongue side using:

– or stainless steel screws.

Returns are easy to make using a joining profile.

The planks are installed perpendicular to the façade.

You can further install a screen with an insect screen to prevent insects from entering the room. This will also allow optimal ventilation of the underside of the wall: it is installed with clips.

Note: You can also provide for the installation of spotlights during the installation.

Do you want to know more? Get in touch with roofing professional s in Simcoe County . They’ve been taking care of properties for over 25 years, be it Flat Roofing, Shingles, Skylight systems, Eavestrough Installation, Soffit Installation , Roofing Repair, or Roofing Maintenance.