How to remove a glass from a garbage disposal

Accidents happen, especially in the kitchen. While we all know that it’s not worth crying over spilled milk, there are some mishaps that can be a bit more troubling.

One question that our professional plumbers get often from clients is, “How do I get broken glass out of garbage disposal?” We can all imagine how this circumstance would happen by accidentally dropping a glass or ceramic plate into the sink. If some pieces of broken glass end up going down the drain and into the garbage disposal, you may not be sure what to do next.

How to remove a glass from a garbage disposal

You likely know that it’s dangerous to reach your hand down into the garbage disposal but you also can’t run the motor without risking shards of glass getting tossed about and possibly damaging the blades and motor.

How to remove broken glass from a garbage disposal

The good news is that this isn’t a hopeless situation. Here are our tips for successfully – and safely – cleaning broken glass out of a garbage disposal.

  1. Switch off the power. The very first thing you should do before retrieving anything down a garbage disposal is cutting off power to the unit. Some models make this easy by having a power switch. Otherwise, you will have to turn off the circuit breaker that services the garbage disposal. It’s always a good idea to test to make sure the unit is really off before moving on to the next step.
  2. Retrieve large pieces with a tool. We’ll say it again. Don’t stick your hands down the garbage disposal – especially when there’s broken glass in it. Instead, try using a pair of needle-nose pliers or a similar tool to pick out the larger pieces of glass. If you have a headlamp, it will make it easier to see down the drain without using any hands.
  3. Manually move the blades. There’s a good chance that some of the glass fell deeper into the canister and you couldn’t reach it with your tool during the first attempt. Since you can’t (and wouldn’t want to) turn on the motor, you can manually move the blades so you can uncover any hidden pieces of glass. You can use your tool to reposition the blades and then look for additional pieces to remove.
  4. Shop-vac the drain. If the glass really shattered and you suspect there are small pieces of glass in the garbage disposal, the next thing to try sucking them out with wet/dry shop vacuum. Use the hose or a narrow accessory that can reach the bottom of the canister. You will likely hear if bits of glass are getting sucked up.
  5. Turn the power back on a test. Once you think you removed all the glass pieces, you can turn the power back on, run the water, and turn on the garbage disposal to test it out. If you hear a loud grinding, that means there’s still some glass interfering with the blades and motor.

Professional garbage disposal service

If you go through this list of steps (even multiple times) and can’t seem to remove the broken glass or another blockage, it may be time to all in a licensed plumber.

For trusted, professional service in Amarillo, TX, and surrounding areas, call Pratt Plumbing. We can help with all your garbage disposal repair and installation needs. To schedule a service visit, call us at (806) 373-7866.

  • by Contractor2020
  • Published at July 19, 2020
  • Category: Garbage Disposal

Glasses and dishware can occasionally break when they’re handled in the sink. Unfortunately, glass and other broken shards can make their way into your sink’s garbage disposal. Great! Now we have to fish these pieces out very, very carefully…

How to remove a glass from a garbage disposal

Step 1: Cut the Power

Before you do anything, the power being supplied to the garbage disposal must be turned off. You can turn off the power on the disposal itself, but just to be safe — switch off the breaker at the panel too.

Step 2: Go Fishing

First things first, do not stick your hand into the drain in hope to pull out the glass. Instead, grab a pair of needle nose pliers and begun pulling out as many pieces as you can find. Most of the bigger pieces will live toward the top of the drain’s opening.

Step 3: Vacuum or Bust

Next up, bring your Shop Vac into the house from the garage. Using the long-head attachment, begin sucking out glass from the drain opening. If you don’t have this long, yet skinny attachment, tape thin PEX tubing to the nozzle of the vacuum. Some pieces will need to sucked out one by one if the opening of the nozzle isn’t wide enough.

Step 4: Turn the Blades

To remove the last bits and pieces of remaining glass, you’ll need to turn the blades of the disposal. Do this by using a hex key underneath the disposal, or by using a broom handle (or stick) via the drain opening to turn the blades. Suck up any remaining glass with your vacuum.

Step 5: Power On

Once all of the glass has been removed, turn the power back on for the garbage disposal. Run the tap to wash away any extremely small piece of glass that might linger behind.

Removing glass from a garbage disposal isn’t difficult — but it is dangerous. When your garbage disposal or plumbing needs service or repair, contact Len The Plumber. If you’re looking for a reliable plumber, check to see if you live in one of our many service areas!

A garbage disposal can be very efficient and can grind many things well, but large pieces of glass are not among them. Unfortunately, accidents can happen, and if you break glass that falls into your disposal, do not despair. By using the following steps you will be able to remove this glass.

Step 1 – Remove Small Pieces of Glass

First, determine whether the pieces of glass are large and have jammed the disposal blades, or whether they are small enough that your disposal blades still are able to turn. If you have reason to believe the pieces are small, then simply turn on your cold water and the garbage disposal and let it run. Small pieces will not harm your disposal. In fact, they can actually sharpen its blades. Once you have ground the tiny shards of glass, fill your sink with water and allow it to drain slowly into the disposal, removing any remaining glass that may have been caught in the blades of your disposal.

Step 2 – Remove Larger Pieces of Glass

If you determine that the pieces of glass in your disposal are large ones, do not try to grind them up. If you do, you may jam up the disposal and make it more difficult to remove the glass in it.

Make sure your disposal is turned off, unplugged, and keep your hand out of the disposal. Needless to say, putting your hand down the disposal with the sharp edges of glass will only be asking for trouble. To grip some of the glass pieces, use kitchen tongs. Carefully reach into your disposal, grasp a piece of glass, remove it, and deposit it in a safe place, such as a plastic bag or garbage can. Repeat this process until you’ve removed all glass remnants.

Another method that works quite well is to cut the bottom off a large, raw potato that will fit through the opening of the disposal. Then jam the potato down onto the bottom surface of your disposal. The force of entry will embed some of the glass pieces into the potato. Continue the process with additional potatoes until you have removed all the large glass pieces. Then grind up any pieces that are small enough to avoid jamming up the disposal.

Step 3 – Run the Disposal

When you have removed all the glass from your disposal, turn on the cold water and your disposal to see if the disposal is turning as it should.

Step 4 – Reset the Disposal

If your disposal fails to turn, you may need to reset it. Turn off the power switch, locate the reset button on the bottom of your disposal unit, push the button, and then turn on the power switch again.

Step 5 – Dislodge the Disposal Blades

If a piece of glass has become wedged into the blades and has become lodged, turn off your disposal, insert an Allen wrench into the socket on the bottom surface of your disposal, and turn the wrench. When the blades become free again, remove the wrench and turn on the power.

When you purchase through links on our site, we may earn commissions at no cost to you.

Related Articles

Foreign objects such as glass can cause your garbage disposal to jam. When your disposal jams, you may hear it hum when you turn it on, but the grinder won’t turn, and can’t shred and drain away food waste. For most garbage disposal models, you can use a couple of tools to free the grinder blades and remove the glass. It’s important to remove all visible shards first and then proceed to manually forcing the blades to break up the remaining glass.

How to Clear Garbage Disposals of Glass

1. Shut Down the Power

Turn the power to the disposal unit off at the main breaker. Wear heavy work gloves before you touch any visible shards and do not attempt to work on your garbage disposal with the power turned on.

2. Remove Glass With Tweezers

Pick out visible pieces of glass from the garbage disposal drain using tweezers or needle-nose pliers. Shine a flashlight into the drain and make sure you remove all large, accessible shards of glass. Do not put your hand into the disposal drain.

3. Check the Reset Button

Lie beneath the sink so that you can see the bottom of the disposal unit. Check that the red reset button near the bottom of the unit hasn’t popped out. If it has, press it back in again, advises The Plumbing Experts.

4. Move the Grinder Blades

Insert an Allen wrench into the port on the bottom of the disposal unit. Turn the key clockwise until you feel resistance. Turn it counterclockwise until you feel resistance again. This moves the grinder blades inside the unit manually and helps to break up the glass and debris that are clogging the inside. If your garbage disposal doesn’t have a port for the Allen wrench, you can insert a broom handle into the disposer opening and gently try to turn it back and forth.

Continue to turn the key clockwise and then counterclockwise until it moves freely.

5. Use a Disposal Wrench

Insert a garbage disposal tool wrench into the drain from above if the Allen key does not free the glass. A disposal wrench is a long, flat metal tool with a handle at the top and a U-shaped blade at the bottom that you can find at most hardware and appliance parts stores. It is commonly used by plumbers to clear disposal drains.

Turn the wrench clockwise until you feel resistance and then turn it counterclockwise. The blades at the end of this tool line up with the blades on the disposal’s grinder to turn them manually, and free the glass and debris inside.

6. Use a Wet-Dry Vacuum

Continue turning the wrench until there is no resistance. Insert the nozzle of a wet-dry vacuum into the drain. Turn it on to suck out the broken glass in garbage disposal, advises Maybe Marvelous Life.

7. Restore the Power

Turn the power back on and run water into the disposal drain. Turn the garbage disposal on. Let it run for a minute to clear any remaining bits of glass or debris.

Related Articles

The garbage disposal makes food cleanup a breeze, and if food were the only thing that ever found its way into the disposal you’d be enjoying the day rather than trying to figure out how to remove the glass that sneaked into the disposal. After explaining to your youngster that the garbage disposal isn’t a glass recycling bin, you can quickly fix the problem with common tools so life can go on as normal once again.

Turn off the power to the garbage disposal to avoid a day in the emergency room, explaining why you stuck your hand in the disposal. The safest way to cut the power is at the breaker box rather than at the switch to ensure it is not turned on accidentally while you work.

Pull out any larger pieces you can reach with needle-nose pliers. Sometimes when glass falls in the sink the larger pieces remain near the top. Never stick your hands in the disposal to pull out the large pieces of glass.

Suck up pieces of glass with the shop vacuum. If the hose is too large or too short to get down far enough, create a temporary hose with cross-linked polyethylene tubing (PEX) or other smaller flexible tubing. Cut a piece that is long enough to fit as far down the disposal as possible and at least a couple of inches into the shop vac hose. Wrapping duct tape around the two hoses, starting with the shop vac, will do the trick. The pieces of glass might be too large to travel through the PEX, so you might need to pull out one piece at a time, using the suction power of the vacuum to hold the glass against the PEX.

Use a hex key on the bottom of the disposal to manually turn the blade to help dislodge any glass blocking the blades. Vacuum again to suck up the dislodged particles of glass. If your garbage disposal unit does not have an option to insert a hex key at the bottom, use a broom stick instead. Insert it through the top of the disposal and manually turn the blade. Move the vacuum hose or PEX around until you no longer hear any glass sounds and the vacuum is no longer sucking up any glass particles.

Turn the power back on to the garbage disposal. Turn on the cold water and give the disposal a try to make sure the glass has been cleared thoroughly.

Things You Will Need

Cross-linked polyethylene tubing (PEX)


Keep your face away from the opening to the disposal when turning it on in case you missed some of the glass.

Removing a broken glass out of garbage disposal is not a difficult task, you just need a few tools and equipment to complete the task. But be careful while removing the broken glass as you do not want to get cut yourself or get injured during the process. Just follow our step by step process and you will be fine.

Tools And Equipment’s Needed To Get Broken Glass Out Of A Garbage Disposal

  • Needle-nose Pliers
  • Shop Vacuum
  • Hex Key

Steps To Get Broken Glass Out Of A Garbage Disposal

Step 1 – First thing we will do is to cut off the power. Unplug the garbage disposal and to be safe, disconnect the garbage disposal from the circuit breaker as well. The first step is extremely important because if garbage disposal turns on suddenly, the small pieces of glass can fly out and could injure you.

Step 2 – Now we will remove the glass. Before starting the process, please do not make the mistake of taking out the broken glass by sticking your bare hands in the garbage disposal, you may get seriously hurt.

For this process grab your needle-nose pliers. Some people often get lazy and use tongs which is not recommended because it does not provide enough grip to hold the glass and will make removing glass difficult and time-consuming.

With the help of needle-nose pliers, pull out the large pieces of glass that are visible. You can also use a flashlight or a lamp to look inside the garbage disposal and remove the easily accessible pieces. Just give your best and remove as many pieces as possible.

Step 3 – Now it is time to grab your Shop Vacuum. If you do not have a shop vacuum, then we will suggest you get one. They are very handy in these situations and in such cases, you cannot use your normal vacuum cleaner.

Before running the shop vacuum make sure the garbage disposal is unplugged and no water is running. Use the little attachment that comes with the shop vacuum and use it to remove all the little pieces out of garbage disposal. In case you get big pieces stuck at the mouth of the vacuum then remove them one by one very carefully.

Now peek inside the garbage disposal with a flashlight to check if anything is left. If not, then you can move to the next step.

Step 4 – After removing the small pieces with the shop vacuum, we will manually move the blades of the garbage disposal with the hex key to unjam the blades.

Now, get down under the sink to reach the bottom side of the garbage disposal. Get underneath the garbage disposal, right in the center of it you will see a hole, put a hex key inside it, and turn it. If there is anything stuck in the blades, it will be difficult to move blades with the key.

You can use your shop vacuum again to pull out the pieces till it gets easy to move the blades with the hex key. Manually moving the blades will remove all the stuck pieces and it will free up your garbage disposal.

Step 5 – Now carefully pick up the glass pieces which you have removed with help of cloth and discard them safely. Clear the sink area and plug in your garbage disposal. Turn on the water and let it run for a few minutes. The water will wash away any remaining small pieces that may have stayed behind. Switch on the garbage disposal and check if everything is working fine.

If everything is good, then your work is done.

Please keep in mind that we may receive a small commissions when you click our links and make purchases. However, this does not impact our reviews and comparisons. We try our best to keep things fair and balanced, in order to help you make the best choice for you.

Garbage disposals are a wonderfully convenient kitchen appliance. But while they’re often extremely useful, they can also fall victim to problems. Broken blades from foreign objects and attempting to dispose of food improperly can lead to problems in the appliance and your pipes.

How to remove a glass from a garbage disposal

If you’ve ever accidentally dropped a foreign object into a running garbage disposal, you can understand the panic associated with the mistake. When you have broken glass in your garbage disposal, it’s important to take safe steps to remove the glass shards with pliers and a vacuum, without damaging the disposal blades – or your hands.

Step for removing glass from your garbage disposal

  1. Turn off the disposal from the power source. This is an essential first step to avoid a dangerous situation.
  2. Remove as many large pieces of glass as possible. Use pliers to remove whatever shards of glass you can. NEVER reach into the garbage disposal with your hands.
  3. Vacuum the drain opening. Once you have removed the large pieces of broken glass, use a shop vac or vacuum with a nozzle attachment to remove smaller, less visible pieces.
  4. Turn the blades. Again, do not reach into the garbage disposal with your bare hands. Turn the garbage disposal blades using a HEX key from below the appliance or with a broom handle or similar device through the drain opening. Turning the blades will dislodge any bits of broken glass that you might have missed.
  5. Repeat step 3. Vacuum again to ensure you have removed as much of the glass as possible.
  6. Turn the disposal back on. Turn the disposal back on and run water through the system to flush out any microscopic remnants that might exist.

Broken glass in a garbage disposal is not the end of the world, but it can be a dangerous mess to clean up. Make sure to exercise extreme caution when dealing with glass in a garbage disposal, as the mix of electricity, sharp blades, and sharp glass can be catastrophic.

Garbage disposal repair and installation

If you encounter any other issues with your garbage disposal, or if it’s time to install a new unit, call the local pros at Waldman Plumbing and Heating, Inc. To schedule an appointment, call us at (781) 780-3184.

  • Published at March 30, 2021
  • Category: Garbage Disposals

Accidents happen – especially in the kitchen where there’s so much activity between meal prep, cooking, and cleaning. One accident that can be extra frustrating – and potentially dangerous – is having broken glass fall down your garbage disposal.

How to remove a glass from a garbage disposal

Whether it’s a shattered wine glass or chipped plate, it’s important to clean the debris out the drain before using the disposal again. The good news is that with some patience and by taking the proper steps, you can safely remove the glass and return to the rest of your kitchen duties.

Here are some dos and don’ts to follow:

1. Turn off the power.

This is the first step any time you’re working on the garbage disposal. While you can turn off the power directly to the unit, we recommend you unplug it completely or turn off the switch at your circuit breaker box, just to be safe.

2. Use a wet/dry vacuum.

The best way to retrieve the small pieces is by sucking them up with your trusted Shop Vac. The long, skinny attachment is ideal to get into all the crevices of the garbage disposal.

3. Manually turn the blades.

While vacuuming out the drain, it’s a good idea to move the disposal blades around to loosen up any small pieces that are hiding on bottom. You can do this by using an Allen wrench (aka hex key) to wiggle the hole at the bottom of the disposal (under the sink). Another option is using a broom handle or similar object to insert into the drain (above the sink) and push the blades around a bit. Then give the drain another pass with the vacuum.


1. Run the garbage disposal with glass in it: It’s never wise to use the garbage disposal with any non-food items in it, and that goes extra for glass. Not only do you risk wearing down or breaking the unit, but shards of glass could come flying back up and injure you.

2. Stick your hand down the drain: The last thing you want to do is cut your fingers on either the disposal blades or the glass you’re attempting to remove. Instead, using a tool such as a pair of pliers to pull out the bigger pieces of glass.

By being smart and taking the right precautions, you can successfully clean broken glass out of your garbage disposal. However, if you run into any issues or want a professional to look at your disposal, don’t hesitate to contact Reichelt Plumbing. We’ve been serving the Schererville area for over 25 years, and will be happy to help you with any plumbing issues. Call us today at (219) 322-4906.

  • Published at April 30, 2020
  • Category: Garbage Disposal
  • Home
  • Consumer Advice
  • Agent Advice
  • Agent With Heart
  • Agent Marketing Package
  • Agent Resource Center
  • Advice from Agents

How to Remove Broken Glass from the Garbage Disposal

Broken glasses can be dangerous—especially when lodged into a garbage disposal. Plus, according to the environmental rules, leaving pieces of glasses in garbage disposal not only hurts the environment but can also endanger your life. However, removing the glass from garbage disposal can be a tricky ordeal—especially if you are new to this handling glass. Remember, glass can cause serious injuries. Care must be taken.

But if the glass didn’t cause any major damages, you can remove the particles using a wrench or a broomstick. You could also opt to vacuum the disposal. However, if doing this doesn’t bring out the glass then you might want to remove the unit and shake it rigorously. Check out the following steps to get rid of glass material stuck in your garbage disposal. They’re safe and highly effective.

Start With Small Pieces

How big are the pieces of glass? Are they large? Have they jammed your disposal blades? Determine their sizes. There are those pieces that are small enough and can be turned to buy your disposal blades. And if you ascertain that they are small in size, consider running cold water in your garbage disposal. Remember, small pieces don’t harm the blades. Instead, they make them sharper. Once you are through with grinding those tiny glass shards, ensure the sink is filled with lots of water. Then allow things to drain into the disposal. This will remove any glass stuck in the disposal’s blades.

Go To Larger Pieces

Don’t grind large pieces in the disposal. Doing so will jam the disposal—making it more difficult when it comes to removing the glass. Also, be sure to turn off the disposal. Plus, keep your hands away from the disposal— glass can injure your hands . From here, use kitchen tongs to grip the glass. Don’t rush. Slowly and carefully grasp the pieces and put them in a safe container. Do this again and again till every glass is out of the garbage.

Alternatively, you could chop off the bottom of a big, raw potato that’ll perfectly fit through the opening of your garbage disposal. Once done, try jamming the potato down onto the lower surface of the disposal. The force exerted during entry will embed some pieces of the broken glass into the potato. Repeat the process with more potatoes until you’ve gotten rid of all the large glass pieces.

Start Running the Disposal

When you’re done removing all the glass pieces, turn on your cold water tap as well as the disposal to check if the disposal is functioning properly.

Consider Resetting the Disposal

If it fails to turn on, you might need to reset your disposal. Switch off the power switch, press the reset button located at the bottom of the unit, and then switch on the power supply again.

Dislodging the Disposal Blades

In case some pieces of glass have become wedged into the blades of your disposal and have become lodged, put off the unit and using an Allen wrench try removing the glass particles. Remove the wrench and switch on the power.

Don’t sink your hand inside the disposal in the hope to remove some glass particles. Instead, utilize a pair of small-sized pliers and start pulling out the pieces you can find. Remember, most of the larger particles will tend to live toward the upper side of the drain’s opening.

Using a Shop Vac, go ahead and such out a glass from the opening of your garbage disposal. But if you don’t have this long-head attachment, consider tape thinning PEX tubing to the drain’s vacuum nozzle. For small nozzles, you may need to suck the glass particles one by one. Though this might take quite long, it’s usually an effective way of removing a glass from your garbage disposal unit.

Turn the Blades

To get rid of the remaining pieces of glass, you’ll have to switch off the blades. Do this with the help of the hex key underneath your disposal unit or by utilizing a broom handle via the drain opening to quickly turn the blades. Be sure to suck up all the remaining glass particles with your vacuum.

After all the glass has been removed, switch on the power of your garbage disposal. Open the water tap to wash away any tiny pieces that might linger behind. You don’t want to work in a kitchen whose garbage disposal unit isn’t functioning properly, right? Then undertake the right measures and fix this problem in the shortest time possible.

Lastly, you’ll need to reinstall your garbage disposal and continue disposing of your kitchen waste. If you’re able to follow these simple tips, you can always get your unit cleaned and unblocked in no time. Though it may appear as a big issue at first, there’s actually nothing much to worry about.

Garbage disposal is a must-have for any homeowner. It’s actually what keeps your kitchen in good condition. With an open drain line, however, you’re more likely to drop utensils as well as other materials in the drainage pipe. Items like spoons, forks, and glass can present a big challenge. A stuck glass in your disposal unit can be a real mess. Handle it cautiously or you’ll end up hurting yourself.

Removing the glass from your garbage disposal isn’t very easy. If you turn on your unit without noticing the presence of glass materials, you might damage the inner blades as well as other parts of the disposal. Plus, the unit’s motor can also get hurt by the sharp edges, forcing to purchase a new unit.

It isn’t always an easy task of removing glass from your garbage disposal. Plus, it can be extremely dangerous. With the above steps, however, you can always fix this problem within a few minutes. Remember, pieces of glass can be dangerous. They can injure your hands or get into your food. Therefore, it’s advisable to handle them properly. Plus, ensure you buy the best garbage disposal. Visit garbage disposal Reviews .

I have a garbage disposal that had a shot glass fall in. It got ground up. The disposal got jammed; I unjammed it and now it makes a glass grinding noise because of the shards inside.

How do I clear the glass?

What do I need to do to fix this?

How to remove a glass from a garbage disposal

11 Answers 11

The easy way: remove the large shards with tongs. If you’re having a hard time, cut up an old kitchen sponge, make sure it’s soft (moist) and put it in the tongs as a bait for all the glass shards. They’ll stick in the sponge just like they would your hand. Then, just hope that the small pieces will go down the drain with time.

The hard way: unhook the disposal (turn off the power first), take it outside, turn it upside down, and really work on it with a garden hose. Wear gloves and verify by operating it via the screw on the base to make sure you got everything before you take it back in. Don’t do this anywhere someone would go barefoot.

I’ve used a warmed, peeled potato with good effect to pick up glass. Also if you can get a wet/dry shop vac in there you can attempt to use that to bring the pieces out.

The tong approach is good, and it is safe. Don’t try with your hands. Ball up some duct tape with sticky side out and dob it around the bottom of the disposer. The smaller pieces will work themselves out with time. Putting some bread or other porous sticky organic material in there and running it will help gather the shards and pass them. Go easy on the water, so the bread will catch the glass before it dissolves too much.

I agree to use tongs (or large needle-nose pliers) to get the big glass shards. Then I would use a Shop Vac for the smaller bits.

Next, I would put a wooden broom handle down the disposal and work the blades back and forth a few times to shake loose any bits of glass that might be wedged. Shop Vac again.

Anything that is left by that point would be like grains of sand, and would probably wash through the disposal. Fill a pot or pitcher with water and dump it directly into the disposal. Repeat a few times. (Don’t turn on the disposal during this. The idea is to get the glass out of there so the mechanism doesn’t dull excessively while eating glass.)

Finally, run the disposal for a minute or two with a steady stream of water. Any tiny/stubborn bits that you missed should be ground to dust.

Have you ever had a cup fall into your garbage disposal? Well, you are not the only one with that bad experience. If a glass cup or a jar ends up in your garbage disposal here is how to take it out;

You can take a cup or jar out of garbage disposal using needle-nose pliers. If the cup is too big or inverted, you can use a shop vac and slowly bring the cup out of the disposal. If the cup or jar is made of plastic, you can heat the edge of a knife, cut the plastic and take out the pieces.

How to remove a glass from a garbage disposal

Here is a detailed guide to getting cups and jars that fell into your garbage disposal;

How to get a shot glass out of garbage disposal

Shot glasses are prone to fall into your garbage disposal, especially if you had too many shots! Shot glasses are small, and hence they make their way easily into the grinding chamber of the disposal.

You can take out the shot glass in your garbage disposal with the help of a needle-nose plier. If the glass is broken, all the large pieces should be removed with pliers, and then use a shop vac to remove the tiny pieces. Wash away any debris left with plenty of water.

If a shot glass falls into your disposal, here is how to get it out. Please note that the point here is to free the garbage disposal of the shot glass, it is not about getting the shot glass intact.

  1. Disconnect the garbage disposal: In most cases, the garbage disposal will be running when a shot glass accidentally falls in it. If this happens, immediately shut down the garbage disposal. If you don’t, the shot glass will break (you are lucky if you get it out intact), causing damage to your garbage disposals and yourself.
  2. Fish out the pieces using a needle-nose plier: As mentioned before, the shot glass is possibly broken since the garbage disposal was running. If it was not, you are lucky. Now that the garbage disposal is off, use a needle-nose plier to remove all the pieces you can carefully. In most cases, there won’t be more than two or three pieces if you managed to shut down the garbage disposal in time.
  3. Use a shop vac to remove all the small pieces: There can be tiny shattered pieces of glass in the garbage disposal. These need to be sucked up using a shop vac. A shop vac is recommended since there can be water in the disposal. You can also use a home vac if you are confident.
  4. Rotate the blades to dislodge any debris and vac again: Tiny pieces of glass can be stuck beneath the grinding components of your garbage disposal which were not sucked up by the vac in your first attempt. You can dislodge them by rotating the garbage disposal blades using a wrench. Once the blades are moves, use the shop vac again to remove all the glass left in the disposal.
  5. Wash away debris with water: Once all the pieces of the shot glass are taken out, run plenty of water and wash away any debris left in the disposal.

Shot glasses are easier to take out since they are tiny. But glass cups and jars are not so.

How to get a glass cup or a jar out of garbage disposal

Have you ever noticed that some glass cups and jars are made in the exact dimension of the kitchen sinkhole? They can easily slip down the drain hole and into the garbage disposal, but it is hard as hell to get them out,

This happens more often than you can imagine, and so there are many ‘experienced’ people on the subject and many creative solutions to this problem. Here are some of those;

Get the cup or jar out using duct tape

This is one creative solution I recently found from YouTube. Here, the guy uses duct tape, some WD-40, some hand gel, and some tissue papers to get the job done.

First, spray the WD-40 around the sink flange. Then add some hand gel onto the cup to loosen it. Then wipe the glass and sink of any excess WD-40. Once clean, use two long duct tape pieces and paste one end of them onto the insides of the cup, all the while leaving the rest outside. Grab the ends of the tape and pull the cup or jar out of the garbage disposal.

Using reverse opening pliers

It can be tough to get hold of a cup or jar in the garbage disposal using regular pliers. The cups are often the size of the drain hole, so it won’t leave any room for the pliers to grab them. In this case, you can use reverse-opening pliers. These pliers open up when you exert pressure on their handles. Remove the cup or jar by grabbing it from its inside using a reverse-opening plier and pull it out of the garbage disposal.

This method won’t work if the cup is lying inverted.

If the cup is broken, make sure you remove all the glass from the garbage disposal before running it. Here is a good guide on how to get broken glass out of garbage disposal.

Getting an inverted cup out of garbage disposal using a glue gun

If the cup is in the inverted position, it is impossible to get it out using pliers. In this case, you can glue a handle onto the top of the cup or jar using a glue gun and pull out the cup using it. When doing this, make sure that the cup’s surface is dry so you can glue the handle properly.

Here is a video showing how this is done;

How to get a plastic cup out of a garbage disposal

You can use any of the above methods to get the cup or jar out of your garbage disposal, irrespective of what they are made of. If the cup is made of plastic, and you are not keen on getting it out intact, use this method.

Heat a knife or any sharp tool. When hot, pierce it into the plastic cup stuck inside the garbage disposal. Keep the knife there for a few seconds, so it cools down. Once you get a good grip on the cup, pull it out slowly with the knife.

If the cup is hard to remove, use the hot knife to cut the cup into pieces. Then remove these pieces using pliers.

How to remove a cup that is stuck in the sink drain

Sometimes a cup can get stuck in the sink drain connecting the sink and the garbage disposal. This can happen even if you don’t have a garbage disposal. Often, the cup can be hard to remove with force as it is vacuum sealed into the drain hole. The use of excessive force can break the cup and cause more problems. Here is a simple trick to unstuck a cup from the sink drain;

A cup stuck in the sink drain can be removed by loosening the tight vacuum seal around it. This is done by letting air on the cup’s bottom side by disconnecting the p-trap under the sink. Removing the p-trap will loosen the cup, and you can simply lift it out.

You can also find more creative methods of getting a cup out of a garbage disposal by searching YouTube. Like I said before, a lot of people run into this problem and they make their own solution. If you have any creative ideas to share with us, let me know in the comments.

How to remove a glass from a garbage disposal

Thomas Anderson

My name is Thomas Anderson, and I have worked briefly as a plumber. Even though I am currently working on a different career path I still help out my friends and family with their plumbing issues. This is a hobby blog where I share my knowledge with the audience through random articles. Through this blog, I hope to address some common questions about garbage disposals.

My Waste King brand Legend Series food waste garbage disposal has stopped working. I dropped a wine glass in the sink and the pieces of glass went into the disposal. The glass is now in the garbage disposal and now it won’t work. I was not sure what to do so I turned the disposer ON. It began to crush the glass pieces but then stopped working. Now it will not turn ON when I turn on the disposal wall switch. I carefully removed most of the glass pieces and tried turning the switch back ON but it does nothing. The blades or spinners inside are dead. I hear NO noise when I turn the disposer switch ON. Did I break the food waste disposal or is there something I can do to fix it?

Garbage disposal won’t work – Glass inside – How to fix?

When you dropped the wine glass into the disposal and turned it ON, you most likely jammed the impellers and popped the reset switch . This reset switch or button is located on the bottom of the disposal.

There should be a small garbage disposal hex wrench tool (a standard 1/4″ allen wrench) located at the top of the disposal or under the sink. The garbage disposal tool is used to get the disposal working again when the impeller is jammed or stuck.

Used to free jammed impeller – Garbage disposal hex wrench tool

Here is how to get your garbage disposal working again:

Turn the switch that provides power to the disposal OFF.
Unplug the disposal from power. (usually located under the sink)
Wear gloves and remove as much of the glass pieces from the disposer as you can.
Get a flashlight and find the disposal tool called a HEX wrench.
Locate where the hex wrench fits into on the very bottom and center of the disposal.
Use the wrench and turn the impeller back and forth multiple times.
(The broken glass is wedged around the impeller and preventing it from spinning.)
Moving the disposal impeller back and forth will dislodge the pieces of glass.
Keep turning the impeller with the tool until it is able to turn with no resistance.
(Running the sink faucet water while doing this may help clear the glass as you turn the impeller.)
Once the impeller is free, locate the red reset button on the bottom of the disposal.
Press the red reset button.
Plug the garbage disposal back in.
Run water into the garbage disposal.
Turn the switch to power ON the disposal.
Your disposal should now work with no problems.
(If the disposal does NOT turn back on, check your home circuit breaker as it may have reset.)

Garbage disposal – Hex wrench tool insert hole and Red reset button location

How To Fix A Jammed Garbage Disposer After Glass Is Removed

If perhaps you have a faulty or broken garbage disposal, you may want to check our page on the top 10 best garbage disposals before you go out and buy a new one. We also have some of the best selling garbage disposals below just in case you need to buy a new one…

Garbage Disposals – Best Selling

Have you tried the method above and your garbage disposal is still not getting power or working? We can help! We can help if you have glass in your garbage disposal and it won’t turn on, broken glass in your garbage disposal and it is jammed, glass in the garbage disposal and now it won’t work, and if you have glass in your garbage disposal and it is not working. Please leave us your question below and we will be more than happy to assist you in fixing your garbage disposal.

We’ve all been there – we’re washing the dishes or rinsing them to put in the dishwasher and something happens to cause a glass to break. At least in broke in the sink, right? But now the problem is that some of that broken glass has gone down the garbage disposal.

How to remove a glass from a garbage disposal

Don’t panic – follow these easy steps and you should be fine. But if you have any problems – call your plumber right away.

Steps To Follow If You Have Small Pieces Of Glass:

  1. If you now that the pieces of glass that have fallen in the garbage disposal are very small, then simply turn on your water and your garbage disposal and let it run for awhile. This won’t hurt your garbage disposal.
  2. Once you are down you can drop some ice cubes down the disposal and with the water on, run the disposal to grind up the ice cubes. This will help to ensure that the disposal is clean.
  3. When you are completely done then fill the sink with water and let it drain slowly. This is something that can be done overnight.

Steps To Follow If You Have Large Pieces Of Glass:

  1. BUT – if there are large pieces of glass in the disposal – DO NOT ATTEMPT TO GRIND THEM DOWN IN THE DISPOSAL UNIT.
  2. Instead, turn the power to the disposal off by switching off the breaker.
  3. Use kitchen tongs to pull out the glass pieces out of the disposal unit.
  4. Discard the glass pieces in the garbage – be careful not to drop it or to cut yourself.
  5. If you have trouble using kitchen tongs – find several potatoes that will fit in the garbage disposal. Cut one in half and with your hand (wear safety gloves) jam the potato down the garbage disposal so that the glass gets embeded into the potato. Then pull the half potato out.
  6. Keep repeating this until you see no more glass in the potato.
  7. Once you’ve removed the larger pieces of glass you can then clean out the garbage disposal of the smaller pieces of glass by following the previous steps.

You shouldn’t have any problems performing these steps but if you do, or you just don’t feel comfortable doing them, contact your plumber immediately.

If you have any questions about garbage disposals, call Atlantis Plumbing today at 770-505-8570. We are available 24 hours a day, 7 days a week.

We Offer Plumbing Services in Metro Atlanta and Surrounding Areas

Fulton County, Bartow County, Cobb County, Paulding County, Cherokee County, Gwinnett County, and Douglas County.

Acworth GA, Atlanta GA, Austell GA, Cartersville GA, Doraville GA, Douglasville GA, Hiram GA, Kennesaw GA, Lawrenceville GA, Lithia Springs GA, Loganville GA, Mableton GA, Marietta GA, Powder Springs GA, Rockmart GA, Roswell GA, Smyrna GA, Tucker GA, Villa Rica GA, Vinings GA, Woodstock GA, and Surrounding Communities.

How to remove a glass from a garbage disposal

Your garbage disposal has the impressive ability to grind down massive amounts of rubbish. Unfortunately, however, there are times when the wrong types of items and materials make their way down into the drain. When they do, you have to have a way to safely get them back out. Grinding these things up rather than removing them could seriously damage this appliance. More importantly, pulling them out with your hands could lead to lacerations or other injuries. For instance, if you ever experience glass in the garbage disposal, knowing how to remove it without harming yourself and without damaging your garbage disposal is critical.

How To Safely Clear Broken Glass From Your Garbage Disposal

In this article, we discuss how to remove glass from your garbage disposal.

Identify The Broken Item To Know What You’re Looking For

Find out which of your plates, mugs, or other serving-ware has been broken. Assessing the remainder of this item will give you an idea of how much glass you’re looking for.

You may find that a relatively small piece of glass has chipped off or you might discover that an entire saucer is lying at the bottom of the drain in numerous pieces. Having an idea of the amount of glass that you need to retrieve will ensure that you aren’t leaving any large pieces behind.

Use A Light To Peer Down Into The Unit

How to remove a glass from a garbage disposalUse your cell phone or a flashlight to illuminate the interior of the drain. If the fragments of glass are visible, you may be able to quickly reach in and retrieve them with an appropriate tool.

Before taking any action, however, you’ll want to make sure that the power to your garbage disposal has been turned completely off. There should be a simple on-and-off switch at the base of the unit or on the wall. The best way to ensure that the power supply to this appliance is off is by shutting it off at the circuit breaker. Only after this has been done will you be able to safely reach in and pull the fragments out.

If you have protective gloves, be sure to use them to avoid getting cut on sharp edges. If you do not have protective gloves, consider using a pair of needle-nose pliers or kitchen tongs to remove the obstruction.

Suctions The Remaining Fragments Up With Your Vacuum Cleaner

In some instances, it may be possible to retrieve small pieces of broken glass using the hose attachment on your vacuum cleaner. This is only a workable solution, however, when there is no substantial build-up of water in the drain and when your vacuum boasts both wet and dry operation.

More often than not, if the obstruction in your garbage disposal has created a considerable back-up of water, you should call a plumber. In instances like these, we can safely remove all glass fragments, clear any resulting blockages, and make sure that everything is working properly.

Verify That You’ve Collected Everything

If possible, take a quick look at the amount of glass that you’ve collected and then compare it to the missing pieces from your broken item or items. This will tell you whether or not the job is done. If you have performed the retrieval with a pair of tongs or needle-nose pliers, be sure to follow-up with a wet-dry vacuum. Consequently, even relatively small-sized shards can cause continued problems with the garbage disposal and its functioning.

Perform A Quick Test

How to remove a glass from a garbage disposal

If your troubleshooting was thorough and effective, your disposal should run seamlessly and without making any harsh grinding sounds. Turn the power supply to the unit back on and let the water run for several seconds. Then activate your garbage disposal.

If you hear strange noises, turn the unit off immediately. If the disposal does not turn on after the power supply has been restored and your troubleshooting is complete, try pushing the red reset button at the base of the unit.

However, if the problem still remains unresolved, get in touch with us to schedule a garbage disposal repair service. It may be that the unit has sustained lasting damage, or it could be that it’s finally reached the end of its lifespan. With a professional inspection and repair, you can be sure that everything is performing exactly as it should.

Call Robinson Plumbing For Water Heater Maintenance & Repairs

Contact Robinson Plumbing, one of the most trusted plumbing companies in the Lehigh Valley, for reliable plumbing services. We offer a variety of plumbing services ranging from garbage disposal repairs and replacements, plumbing fixture upgrades, water leak repairs, and more. We always give a wide range of solutions when possible for any plumbing repairs. This allows you to choose the best option for your budget and home.

We proudly offer the most affordable and best plumbing services in the Lehigh Valley area. Additionally, our experienced plumbers all have the proper licenses and expertise to ensure your satisfaction. All of our work is backed with a guarantee. Contact Robinson Plumbing today and schedule your free estimate.

Call us today at (610) 351-9889 or click here to contact us for any questions that you might have!

Table of Contents

You’ll want to use kitchen tongs or a needle nose pliers and pull out any large broken pieces from the disposal. Another effective way of removing the glass is to find a raw potato that is large enough to fit into the opening of the disposal and cut the bottom off of it.

What happens if glass goes down the garbage disposal?

You likely know that it’s dangerous to reach your hand down into the garbage disposal but you also can’t run the motor without risking shards of glass getting tossed about and possibly damaging the blades and motor.

Can you grind glass in a garbage disposal?

Foreign objects such as glass can cause your garbage disposal to jam. For most garbage disposal models, you can use a couple of tools to free the grinder blades and remove the glass. It’s important to remove all visible shards first and then proceed to manually forcing the blades to break up the remaining glass.

How do you get something out of a garbage disposal?

Use kitchen utensils to retrieve nonmetal items Use a flashlight to locate nonmetal items that may have fallen down the disposal. Should you see anything, try to retrieve it with tongs, wooden spoons or another long kitchen utensil. Whatever you do, avoid sticking your hand down there – it’s sharp!.

What do you do if you break a glass in the dishwasher?

If you suspect that a glass has broken during the dishwasher’s cycle, you should immediately stop the appliance to inspect it. If a glass is broken, it is important that you take care removing the pieces, as they will likely be very sharp and jagged. Additional broken pieces of glass may be caught in the drain basket.

Can I run my dishwasher if my garbage disposal is broken?

If, for example, your disposal is broken, as in an electrical or mechanical problem, you can still run the dishwasher. It’s the garbage disposal drain system that can keep the dishwasher from draining properly.

What does it mean when your garbage disposal just hums?

A humming garbage disposal is likely caused by an object in the drain that has jammed the blades. When the blades are jammed, they are unable to rotate. If the garbage disposal is turned on while an object has blocked the blades from spinning, its use has the potential to burn out the unit’s motor.

How do you get popcorn kernels out of a garbage disposal?

If you don’t get all the popcorn seeds out of the garbage disposal, they will just jam it again. Maybe there are just a few more, in which case grinding several ice cubes will probably force them down the drain. If there is a bagful, though, you’d better get them out, or you risk permanent damage to your appliance.

Does broken glass damage dishwasher?

Broken glass in a dishwasher can further damage both the wash tub and the dishes inside. If you hear the sound of broken glass during or after a cycle, remove it safely and thoroughly before it damages you or the unit.

Why does glass break in dishwasher?

Dishwashers use water at a much higher temperature (between 70 and 75 °C) than you would use to hand-wash dishes (between 40 and 45 °C). When the hot water in your dishwasher hits a cold, thick-bottomed glass, it causes differential expansion, then it cracks.

What are glass shards?

The definition of a shard is a broken piece, especially of pottery, glass or metal. An example of a shard is a small piece of glass that broke off a window. A piece of broken glass or pottery, especially one found in an archaeological dig.

Can you still use the sink if the garbage disposal is broken?

Yes you can, but with some caveats. The garbage disposal is the port that the dishwasher uses for its’ drain line. A broken disposal will still be connected to the drain system and allow grey water from the washer to flow thru it into to the drain line.

How long does a garbage disposal usually last?

If you should especially consider replacing your disposal if it’s been at least a decade since your last renovation or garbage disposal installation project. Most disposals have a life expectancy of about 10 years, after which they may start clogging more often.

Why is water coming out the bottom of my garbage disposal?

If water is dripping from the bottom of your garbage disposal, it’s likely due to a broken seal or cracks inside the unit. Leaks coming from the reset button are especially risky and indicate that the garbage disposal is likely at the end of its life. The fix: Replace the unit.

How do I fix a garbage disposal that just hums?

How Can You Determine Why Your Garbage Disposal Only Hums? Turn off power to the disposal. Visually check for food or foreign objects in the disposal. Use a wooden spoon to gently push and rotate the blades manually. Use an allen wrench to manually rotate the flywheel. Turn the allen wrench back and forth.

Why is my garbage disposal humming but not jammed?

If the garbage disposal humming sound is persistent when you turn it on, but the flywheel isn’t stuck, the likely reason for this is that the motor bearing has ceased. The simple fact that your garbage disposal is humming, means it’s still getting power, which is a good thing.

Why is my garbage disposal humming but not spinning?

If the garbage disposal won’t turn on but the motor makes a humming sound when you flip the switch, it indicates that the inner flywheel is jammed. The problem is almost always the result of food or a foreign object being lodged between the impeller(s) and the shredder ring inside the disposal.

How do you get metal out of a garbage disposal?

At the bottom of the disposal housing, there is a hole in the underside that goes to the motor shaft. If you use the Allen type wrench in that hole you should be able to rock the motor shaft back and forth to break the metal piece stuck in the shredder plate loose.

How do you get a peach pit out of a garbage disposal?

How to get a peach pit out of a garbage disposal – Quora. Unplug it. Reach in and pull it out. Plug back in.

Can you vacuum glass?

It’s true that vacuuming glass can damage your vacuum cleaner. Large pieces of broken glass are especially damaging, but your vacuum cleaner could be ruined by smaller shards too.

Where is the drain basket in a dishwasher?

The drain basket can usually be located at the bottom or side of the dishwasher. If it’s clogged with food or detergent, simply wash it under the sink until clear. If you can’t find or remove the basket, pour one tablespoon of baking soda, then two tablespoons of vinegar down the drain. Let it sit for 15 minutes.

Can a dishwasher explode?

The reason for this is to release hydrogen sulfide gas which may be in the water lines. If you run the dishwasher and this gas is present, the gas in the dishwasher could explode.

All garbage disposals come with splash guards, so it is unlikely that any glassware will fall into the unit. I am pretty sure it will get stuck at the splash guard, and you won’t have any difficulty picking it up.

But though strange, sometimes glassware does end up inside the disposal unit. If you ask me how, I don’t know.

How to remove a glass from a garbage disposal

Steps to remove broken glass from a garbage disposal

Time needed: 20 minutes.

If you are unfortunate enough to find glass inside your garbage disposal, here is how to remove them;

    Remove big glass pieces

Use a tong and remove the bigger glass pieces (I am assuming that you are clever enough to switch off the unit before doing this). If you are using a Waste King disposal its splash guard is removable, so it is easier to remove the glass pieces. You will have a tougher time with InSinkErator models.
Remove the tiny pieces using a vacuum cleaner or a sponge

Use a wet sponge to scour through the insides of the unit with the help of a tong. The wet sponge will catch the smaller pieces of broken glass. I am afraid you will have to do this multiple times to get the most of the glass pieces out.
Using a wet-dry vacuum cleaner to suck up the glass pieces would be a better idea. Put its nozzle through the top and run it for a few minutes.
Grind away the rest

Once you have done the best to remove all glass pieces from the garbage disposal run plenty of water and run the unit. The tiniest pieces will be ground and washed away.

But if you are unfortunate enough, the disposal unit won’t start on Step 3. That means your cleaning was not as good as you thought, the garbage disposal is stuck because some tiny glass pieces are jamming its blades. So if this is the case you will have to manually rotate the blades using an Allen wrench (if yours is an InSinkErator) or using a garbage disposal wrench (for Waste King and similar). Once the blades are somewhat free, repeat Step 2 & 3 until the unit starts working again.

The whole process of clearing broken glass from the garbage disposal will take around 20 minutes.

Possible risks of having broken glass inside your garbage disposal

I have heard people recommending to use small glass pieces to sharpen garbage disposal blades. But that is non-sense. Grinding glass in your garbage disposal is not going to sharpen their blades. In fact, these machines do not have blades.

Here are the possible risks of grinding broken glass;

Physical injury: If the garbage disposal is working when the glassware falls into it, the glass is definitely going to shatter into small pieces. Hopefully, no pieces will fly out and end up in your eyes thanks to the splash guard, but still, there is a small possibility for it.

Jam the disposal unit: The glass can jam the disposal thus making it unable to work. If you here the machine humming then this already happened. You will have to switch off the garbage disposal and remove the glass pieces as mentioned above in this article.

Clogging the pipes: Even if you manage to grind the glass pieces and these remove them from the garbage disposal there is a chance that these particles will clog your pipes. Glass pieces do not easily flow away with water, they tend to stay at the bottom as sand does. However, since the possibility of successfully grinding glass pieces is very small you are not going to end up with enough of them to clog the pipes.

Damage to the disposal unit: Glass pieces can cause damage to garbage disposals. The grinding chamber if most units are made of high-quality plastic. And glass pieces can damage these plastic walls if you are not careful. Grinding glass can also cause alignment problems to the rotating parts of the disposal unit.

How to avoid glassware from falling into the garbage disposal?

Use a garbage disposal strainer: As I said before, it is unlikely that any glassware will fall into a disposal unit that easily. However there are such cases, and the best preventive measure is to use a garbage disposal strainer.

A strainer prevents anything other than water from going down the drain. But unfortunately, you will need to remove it while running a garbage disposal so it cannot prevent any glass pieces from falling into the unit at that time.

Careful of what you put: While running the garbage disposal be mindful of what you are doing. Surprisingly this can prevent many accidents, and save many glasswares.

Use a batch feed unit: Batch feed garbage disposals need to be closed with a lid for them to start working. So there is zero chance of anything falling into them.

I hope this article was helpful in solving your problem. If you have any comments do let me know.

Garbage disposals are a very efficient device and can grind most of the waste. They make cleaning up food a breeze, but if the food were the only thing found in the disposal, you would enjoy it, however, big pieces of glass are not one of those.

Dishware and glasses break in the sink occasionally and may make way to the disposal. Such accidents happen, unfortunately, and if a broken glass falls in the disposal, do not worry.

This guide will give you steps that tell you how to get the glass out of garbage disposal.

1. Cut the power supply:

Before starting with anything, the very first step should be removing the power supply to the garbage disposal.

Turn off the power to garbage disposal, so you do not end up in the ER explaining how your hand got stuck in a kitchen garbage disposal.

The garbage disposal can be turned off itself, but to be very safe, switching off the breaker from the panel is the best option to go with.

2. Fishing!

Another safety hack, food does not stick down your hand in the drain to pull out the glass. Determine if the pieces jammed in the disposal are large or small, which will decide if they can be turned or will have to be removed manually.

If you believe that there are small pieces, run down some cold water and let the garbage disposal run for a while. Small glass pieces will not harm your disposal. Instead, they can aid in sharpening their blades.

Once these tiny glass shards are grounded, fill the sink with water and let it drain slowly through the disposal to get rid of any remaining glass bits which may have been caught up in the blades of the disposal.

3. Remove Large glass pieces

Instead of this unsafe measure, grab a nose plier and begin by removing as many pieces as you can find and get hold of using the plier.

Most of the large glass in garbage disposal must be on the top of the drain opening and can be removed easily.

Make sure that you are not grinding these large pieces of glass, as they will end up jamming your disposal and making it even more challenging to remove the glass from it.

It would help if you again made sure that the disposal is switched off, and you are not putting down your hand in the disposal.

Sticking your hand down the disposal with sharp ended blades is only synonymous with calling in more trouble for yourself.

Kitchen tongs are also a useful utensil to remove these glass pieces. Remove the glass pieces by collecting them from the disposal using pliers or kitchen tongs, and deposit them in a safe place once removed.

Repeat the same until all the glass pieces are removed from the disposal.

Another method to remove glass is by using a shop vacuum to suck up the glass pieces.

If the hose seems too big or too short to get down to it, you can make a temporary hose using a cross-linked polyethylene tubbing or any other small flexible tube.

Cut a long enough piece that can fit as far down the disposal as required and a couple of inches in the shop vacuum hose as well.

Use some duct tape to wrap around both the hoses. Start with the shop vacuum to do the trick well.

Some glass pieces may be very large to go through the PEX, so you may even have to pull them one at a time using the vacuum’s suction power to hold the glass against PEX.

4. Run the disposal

Once all the glass pieces are removed from the disposal, and you are sure that no other remains turn on the disposal and run some cold water in it.

Check if the disposal is turning like it should be, and running cold water will also remove any leftover small bits of glass that may have been stuck in the blades or walls.

The same can be done using a hex key or a broomstick or handle as well, by putting it down the drain’s opening to turn the blades. If there are any remaining glass pieces, again suck them with the vacuum.

5. Dislodge disposal blades

If you see a glass piece being wedged in the blades of your disposal unit, turn it off again and insert an Allen wrench in the socket present at the bottom surface of the disposal unit.

Now turn the wrench. When you see that blades are free again, remove the wrench and switch on the unit again.

6. Resetting the disposal

When you turn on to check the disposal if it does not turn on or turn the way it should be, you may have to reset it.

Switch off the power of the disposal and look for the reset button, which should be present at the underside of the unit.

Push this button and turn the power switch on again, your disposal unit is now reset.

It is not difficult to remove the broken glass in the garbage disposal, but it is quite dangerous.

When the garbage disposal unit or its piping and plumbing need some repair or service, you should contact a professional and reliable plumber.

The garbage disposal unit present in your kitchen sink is a very convenient way to remove the leftovers and scraps efficiently.

Still, if a foreign object like a broken glass gets stuck in it, the mechanism can be jammed, and the entire unit may stop working. There are many steps to how to get a glass out of garbage disposal.

These steps are described above, including removal of significant glass pieces, dislodging the glass an inserting wrench at the top or bottom of disposal, vacuuming the unit, and resetting it.

If none of these work, you can remove the disposal and shake out the glass from it.

< if (sources.length) < this.parentNode.removeChild(sources[0]); >else < this.onerror = null; this.src = fallback; >>)( [. this.parentNode.querySelectorAll(‘source’)], arguments[0].target.currentSrc.replace(/\/$/, ”), ‘/public/images/logo-fallback.png’ )” loading=”lazy”>

Some items should never be put in your garbage disposal. Among them are eggshells, oil, banana peels, coffee grounds and objects such as spoons and cups. If by chance a cup or glass does become lodged in your garbage disposal, do not turn on the disposal or pour oil on it to loosen it. Disconnect the disposal before trying to dislodge the cup.

Disconnect the Power

Anytime you are working with a garbage disposal, turn off the disposal and disconnect the power at your circuit breaker to ensure that the disposal cannot come to life while you are working on it.

Protect Yourself

If you are working with a glass or ceramic cup, the likelihood of hurting yourself is greater than if you are working with a plastic cup. Protect yourself by wearing thick work gloves and a pair of goggles.

Lifting the Cup

Try lifting the cup out of the drain using a pair of needle-nose pliers. Do not grip too firmly if you are trying to dislodge a glass cup. Ask a helper to hold a flashlight over the disposal so that you can see as you try to pick up the cup. If you do not have a helper, wear a headlamp. Gently pull the cup to the surface of the disposal with the pliers.

Water Trick

Fill your sink with hot water and a little soap. Place a toilet plunger over the disposal, ensuring that the plunger forms a seal over the disposal opening. Plunge the disposal up and down until the cup loosens in the disposal and pops up.

  • Mitch the Plumber: Garbage Disposal Repair
  • Chowhound: Pyrex Bowl Stuck in Sink

Vera Leigh has worked as a professional freelance writer since 2008. Her work has appeared in “Learn Overseas” and “Grad Source” magazines. In addition, she received an honorable mention in “Newsweek’s” My Turn contest. She has written features for nonprofits focused on literacy, education, genomics and health. In her spare time, Leigh puts her English major to use by tutoring in grammar and composition.

Garbage disposals exist to discard our waste so that it can be safely eliminated. When you put glass, plastic, wood, or anything else with sharp edges or points into your disposal, you run the risk of them damaging the internal components. Not only that, but they could also cause a leak. For this reason, it is important that you remove the glass from the garbage disposal immediately.

Table of Contents

What can get stuck in a garbage disposer?

The blades are very sharp and precise tools. Anything they come into contact with will be ground up.

The blades rotate at a high speed, so they have a tendency to wear down items that are not food-grade. This can create a hole in the blade or even break the blade itself.

Sharp objects can easily snap and create a mess. They can also easily damage the blades of your disposal. If this happens, you will have to remove the glass or pay for professional repair or buy a new disposal. This makes sense—you do not want something sharp cutting into the blades. At this point, the blades can break. This can create a very dangerous situation for the home if it is not handled correctly.

How to prevent objects from getting stuck in your garbage disposal

While there is not much you can do to prevent your disposal from being damaged by cutting items, there are a few things you can do to protect the blades from being cut in the first place. This will lower the chance of your disposal blades getting damaged, but it will also prevent the items from ever getting near the blades.

You can add a filter over the inlet to make sure that you don’t accidentally push objects into it. It is also possible that you keep the glass away from the sink. You should pay attention when you use a garbage disposal. Everyone can be distracted so let’s take a look at how we can remove glass from the garbage disposal.

The easy fixes for sharp objects in the garbage disposal

If you accidentally put glass in your garbage disposal, there are a few easy ways to fix it. Always wear protective equipment such as goggles and gloves when you work on this.

First, turn the disposal off and unplug it. Remove the item that is stuck. If you are lucky, it are big pieces of glass and it is easy to remove them. Use pliers or another item to do this. These parts can be sharp so be careful and put them in the glass bin.

It is also possible that smaller pieces have gotten into the garbage disposal and this can make it dangerous to turn it on again without opening it up. You should also keep in mind that some items, like small glass pieces, are very hard to remove. We can use a hex key on the bottom to turn the garbage disposal blades. Do this very slowly. We can then use a wet vacuum to remove the glass. It is possible that some liquids were stuck in the garbage disposal so a normal vacuum might break if you use it.

If you are having trouble removing the glass, you can use a prying tool. If there are more pieces, a professional might have to open up your garbage disposal. Check the manual on how to do this if you want to do it yourself.

You also might want to remove the drain as glass particles can create clogs or other damage. You can run a camera in the drain to check if there is glass in it. If there is, you might want to remove it. Grab a bucket and some towels before you start. To open up the drain, simply turn it and it should come loose. You can clean the drains and reattach them. Use a lot of water to clean the drains. Some PVC drains are glued and these can be harder to open up without cutting them open.

Another way is to remove the garbage disposal and turn it upside down. Pieces of glass might fall out of it. This is more work though and sometimes it is not allowed by the manufacturer to hold it upside down so check the manual to see what is allowed.

Make sure that all the glass is removed before you plug the garbage disposal back in. Also, check to make sure that the blades inside it are not damaged. You might have to hit the reset button before the garbage disposal works again. Be very careful when you use it again at first as tiny glass pieces can still be in it.

Final thoughts

The dangers of putting glass in the garbage disposal are very clear. Removing some glass from a garbage disposal is possible but you have to be very careful and wear the proper protective equipment.

Sometimes you will have to call in a professional to get it fixed as small glass pieces can be hard to remove and you might have to open up the garbage disposal. Plumbers will be able to do this for you. They have wet vacuums and other tools to make sure that the glass is completely removed. They can also maintain your garbage disposal and check your drains. This will make sure that your garbage disposal runs as new again.

It could happen to anyone at anytime. Busy washing a sink full of dishes and a small glass cup falls into the grinding chamber without you noticing. You may not see it due to the rubber splash guard or sink full of dirty water.

The water from the sink drains slowly and you turn on the disposal thinking there’s food in the grinding chamber. Before you know it you’re grinding glass or porcelain in the disposal.

1.) Make sure that the only person handling the removal of broken glass is in charge of the on/off switch.

2.) Use thick rubber or work gloves before attempting to insert your hand in the grinding chamber. Broken glass can easily cut your hands or fingers without proper protection.

Play-Dough: You’ll need golf-ball size pieces for this method. Have several pieces readily available since you’ll be throwing away each used one. Now press on the sidewalls of the grinding chamber. Pull the play-dough out and discard. Work your way around the inside of the grinding chamber.

Continue this process until you no longer see glass on the play-dough. If you don’t have play-dough modeling clay works as well.

A Potato: Cut a potato into golf-ball size pieces. Just like the play-dough process above, work your way around the inside walls of the garbage disposal with the potato pieces until you don’t see any glass on the spud. Make sure to discard properly to avoid any injury.

Wet/Dry Shop Vac: If you have a wet-dry shop vacuum you can use it suction out the broken glass from the garbage disposal. It is recommended to still use proper safety gear when performing this task.

Tiny pieces glass should wash away next time you use your disposal. If a large piece of broken glass becomes lodged on the blades, you can try using needle-nose pliers and a flash-light.

Never hesitate to call a professional plumber if you feel uncomfortable performing any of these tips or have the slightest doubt about your safety.

The article here is for informational purposes only and does not guarantee a complete fix.

Primary Sidebar

Hey! It is nice to meet you!

MadWash is a lifestyle blog for the curious with practical tips, health, travel and other topics from everyday life.

How to remove a glass from a garbage disposal

A garbage disposal is a common, handy appliance found in many kitchens. It quickly disposes of any waste and significantly reduces the chance of pipes clogging since it’s installed in the kitchen sink.

However, a garbage disposal might start producing loud, unpleasant sounds, like grinding or rattling. Besides the noise making it less comfortable to use, the grinding may cause concerns about malfunctioning and leave you wondering what’s going on. This article explains why a garbage disposal makes a grinding noise and how to fix the problem.

The source of the noise

The loud, grinding sound is most likely caused by an obstruction preventing the blades’ smooth rotation. In many cases, the object responsible is glass, a kitchen utensil, a piece of metal, or a bone. Whatever the item may be, it’s certainly made of a hard material that the garbage disposal can’t grind up, and it’s jamming the blades.

If the sound is somewhat milder, it might indicate that a grinding component or another part has come loose or that some part of the garbage disposal has broken.

How to fix the problem

To avoid any damage to the machine, turn it off as soon as the loud noise occurs. This way, whatever’s jammed in the appliance doesn’t cause further damage to the blades or other disposal parts.

Turning the power off is the essential first step in removing an object that’s obstructing the mechanism. The safest way to do so is by unplugging the garbage disposal from the power source.

Once you’re sure that the disposal is completely shut down, get a flashlight, and inspect the kitchen sink drain. If you can see the object inside, there are several different ways to try to reach it:

If the object is close to the sink opening and you can reach it without touching the blades, remove it by hand.

Perhaps the object went too far down, or you don’t feel comfortable getting your fingers in the drain. If so, use thinner pliers, tongs, or any long tool that can get to the object.

You could try removing the object with a vacuum cleaner. If the thing stuck in there is light enough, the suction might be able to lift it.

Finally, if none of the approaches above work, it’s possible to reach the jam from the bottom. Use an offset wrench to dislodge the stuck object.

If the garbage disposal can’t be unblocked, the only remaining options are either removing the whole garbage disposal or calling a repair service. Since, at that point, the problem might not even be the obstruction, we recommend contacting a professional appliance service and letting them fix the issue.

If you need a licensed, bonded, experienced plumber for plumbing installation and service in Chandler, Gilbert, Mesa, Queen Creek, Ahwatukee or San Tan Valley call Norfleet Family Plumbing Heating and Air at 480-681-1764.

How to remove a glass from a garbage disposal

Will Broken glass ruin a garbage disposal?

Glasses and dishware can occasionally break when they’re handled in the sink. Unfortunately, glass and other broken shards can make their way into your sink’s garbage disposal. Great! Sep 27, 2017

Can you grind up glass in a garbage disposal?

Foreign objects such as glass can cause your garbage disposal to jam. . For most garbage disposal models, you can use a couple of tools to free the grinder blades and remove the glass. It’s important to remove all visible shards first and then proceed to manually forcing the blades to break up the remaining glass.

How do you get something out of a garbage disposal?

Retrieving the Item

Place your tool of choice into the disposal. Clip the sides of the pliers, tongs or scissors around the item — such as a ring or necklace. Grip the item gently so as not to damage it. Carefully pull it up from the disposal. Sep 26, 2017

What do you do if you break a glass in the dishwasher?

If you suspect that a glass has broken during the dishwasher’s cycle, you should immediately stop the appliance to inspect it. If a glass is broken, it is important that you take care removing the pieces, as they will likely be very sharp and jagged. Additional broken pieces of glass may be caught in the drain basket. May 5, 2020

Main Office: (412) 624-8200

Wear Cut resistant gloves E.g., Leather Gloves, when handling Broken Glass Disposal Boxes.

Glass boxes: Filled Broken Glass Disposal Boxes must be placed inside the Chevron dumpster by the researcher. Tape the bottom and the top of the full box securely. Take the full box to your building’s dumpster. Purchase a replacement box, then tape the bottom to keep it from falling apart if your lab floor gets wet. Broken Glass Boxes will NOT be removed by the custodians.
According to EH&S Guideline Number: 03-018 4. Disposal Preparation
Once the broken glass box is ¾ full, follow the manufacturer’s closing instructions and seal the top with tape. Then, the broken glass box can be disposed in the regular trash.

Ask Chemistry staff E.g., in the stockroom if you are unsure where the dumpster is. We would be glad to help.

Broken Glass Disposal Boxes are available to purchase from the DSS Stockroom and Scientific Suppliers E.g., ThermoFisher Scientific.

UPDATE July 2017 per Chemistry Facilities Coordinator

Since the new trash disposal system was installed on the Chevron dock last week, researchers will once again be responsible for the disposal of their broken glass boxes. Please open the door to the waste receptacle and place the glass box inside the container and close the door.

MBC July 5, 2017.

More information from 2011

There has been some confusion recently over who is responsible (custodians or lab personnel) for getting rid of filled glass waste boxes. In an attempt to answer this question, I contacted numerous people in Facilities Management and unfortunately, got conflicting answers from them as well. Late Friday afternoon, I was able to finally able to talk with the Custodial Manager for the entire Campus about this issue. He informed me that custodians are no longer permitted to remove filled glass waste boxes from the labs. He implemented this change about 18 months ago after a custodian suffered a deep puncture wound to his hand while removing a glass waste box. We subsequently learned that this injury was caused by an improperly-discarded syringe that someone had placed in a glass waste box, but to avoid an possible future injuries to his staff, the custodians have since been forbidden to remove glass waste boxes. Accordingly, the procedure for getting rid of glass waste boxes is as follows:


I hope this clears up any confusion. I further expect that this topic will be addressed during our upcoming Safety Seminars as well. Please feel free to contact me if you have any further questions regarding disposal of glass waste boxes.


Berliner Stadtreinigung (Berlin Waste Management, BSR) is responsible for the rubbish produced by two million households. In addition, we ensure clean streets, pavements and squares – and ensure safe travel in winter. On this page, we explain for you how waste disposal and rubbish separation work in Berlin.

All rubbish bins in overview

The grey household waste bin

Household waste includes all waste that cannot or can only with great expense be recycled. It is not, however, valueless. Everything that ends up in the grey household waste bin is processed by us in our modern waste-to-energy plant, among other places, into “green” energy and clean heat.

Toiletries and tissues, nappies, animal litter

Crockery, plate glass from windows or mirrors

Vacuum cleaner bags, sweepings

Soiled paper, foil, photos

leftover wallpaper, dried-up paints

Ashes and ashtray contents

This does not belong:

Plastics, such as plastic cups or bottles, metals and composites (these belong in the recycling bin)

Glasses, bottles (these belong in the bottle bank)

Paper, cardboard (belongs in the waste paper bin)

Fruit and food waste, coffee grounds (belong in the food bin)

The food bin

All organic waste belongs in the food bin. This helps us to protect the environment, climate and the public purse. This is because we make compost and biogas from the biological waste. The biogas we gain replaces 2.5 million litres of diesel a year, while the compost helps to replace chemical fertilisers.

Leftover food, even cooked (can be wrapped in newspaper)

Old food (without packaging)

Fruit/vegetable leftovers, peelings, including citrus

Coffee grounds, filters, tea, teabags, eggshells

Cuttings/stems, leaves, flowers (you can also use BSR garden waste bags for these)

This does not belong:

Plastics, packaging, film, bags

Metals, aluminium foil, cans

Toiletries, nappies, vacuum cleaner bags

Cat and small animal litter

Treated wood, ashes

Earth, sand, gravel, pebbles

The orange or yellow recycling bin

The recycling bin is for packaging and other objects made of metal, plastic or composites. In Berlin, recycling bins are yellow or orange. The same things are disposed of in each.
If you properly separate recyclable materials (packaging, pots, cans, tins) you aid in their recycling. This preserves scarce raw materials such as crude oil or iron ore and supports climate protection. In Berlin, the companies ALBA and BSR share the disposal of recyclable waste.

Containers, e.g. for yoghurt, margarine

Plastic bottles e.g. for care products, soaps and detergents

Everyday objects e.g. watering cans, plastic bowls, toys

Foil e.g. plastic wrap, plastic bags

Foams, e.g. polystyrene for food

Drink cans, tin cans, bottle caps

Pots, tools, cutlery, screws

Aluminium foils, lids, containers

This does not belong:

The blue waste paper bin

Used paper is an important raw material. When properly separated, used paper helps save natural resources like wood and water. In Berlin alone, every year, the separated collection and reuse of card and paper saves more wood than is produced by the Grunewald.

Newspapers, magazines, cardboard boxes, card

Books, notebooks, writing paper

This does not belong:

Coated paper (waxed, graphic or photographic paper)

Bottle banks and bins

Used glass can be fully recycled. It can be melted and reformed into bottles, containers and glasses as many times as you like. Jars and bottles do not need to be rinsed. But please ensure correct separation of white, green and brown glass. This is important for the subsequent recycling process.

Bottles, e.g. for juice, wine, vinegar

Jars, e.g. for jam or baby food

This does not belong:

Lightbulbs or energy saving bulbs

Crockery, porcelain and ceramics

Plate glass from windows or mirrors

Bulky waste

You can dispose of up to 3 cubic metres of bulky waste with us per delivery without charge. Where? At one of our recycling centres. You can also get us to collect bulky waste. On the saver fare, this costs 50 Euro. You can find further information here.

Bulky waste includes the following:

  • Disassembled large and small pieces of furniture
  • Carpets, mattresses
  • Timber from living areas
  • Scrap such as old bicycles, prams and similar
  • Laminate, door frames, doors and window frames made of plastic (without glass)
  • Plastic parts such as guttering, pipes, cisterns and bath tubs
  • Electrical devices
  • Old textiles (in sacks)
  • Household waste such as e.g. renovation waste in sacks and boxes (to a limited extent)

It is a shame to throw away certain things when other people could use them. For these, please use our free exchange and gift market.

How to remove a glass from a garbage disposal

What to Do When Glass Gets in the Garbage Disposal?

Broken pieces and shards from a broken glass or dish can easily make their way into the garbage disposal. If not removed, this can burn out the appliance’s motor as it tries to grind up these hard pieces. The best course of action is to immediately, and safely, remove pieces of broken glasses or dishes from the garbage disposal.

Fishing for Glass or Broken Dishes in the Garbage Disposal

When working to retrieve an item from the garbage disposal, always be sure to disconnect power to the appliance and never stick your hand directly into the disposal. Instead, use a pair of needle nose pliers or kitchen tongs to remove any pieces that you can find from the garbage disposal. This is often effective for large items, but removing the smaller pieces may be more of a challenge.

A shop vac with a long attachment can be helpful removing these small fragments of glass or broken dish. Place the attachment at the start of the drain, turning the vacuum on. These smaller pieces will be sucked out of the drain and into the vacuum, eliminating the danger of these damaging the garbage disposal’s motor. You may need to move the blades to get all of the pieces to be sure that the appliance is cleared of any glass or other items that could damage it when turned back on.

Turning the Garbage Disposal Back On

Once you are confident that all of the broken pieces have been removed from the garbage disposal, turn on the faucet and run the appliance. Any extremely small pieces lingering behind should be able to travel through the garbage disposal without causing any damage. If you instead hear a grinding noise, turn the appliance off immediately and again check for any lingering pieces with pliers or kitchen tongs and using a shop vac.

If the garbage disposal continues to make a grinding noise when turned on, discontinue use and contact an appliance repair professional.

The team at Jersey Appliance is experienced at repairing garbage disposals. Contact Jersey Appliance at 866-401-9887.

hennessey_support March 14, 2019 Blogs

How to remove a glass from a garbage disposal

Garbage disposals are a great convenience. But like anything mechanical, sometimes they stop working. It’s happened to all of us. You know the drill. You flip the switch and nothing happens, except for the garbage disposal buzzing. Your garbage disposal jammed. So what should you do if something is stuck in the garbage disposal?

We’re glad you asked. We’ll walk you through some do-it-yourself tips here, but if you don’t have the right tools, or just don’t want to lie down with your head under the sink, or if you try everything and the garbage disposal still won’t work, you can call Plumbing By Jake at 928-377-5910 to schedule garbage disposal repair, or garbage disposal replacement, depending on what seems to be the problem. We serve homeowners and commercial clients throughout Mohave County, including Kingman, Bullhead City, Golden Valley, and Lake Havasu.

How to Fix a Jammed Garbage Disposal

Most garbage disposals work the same way. The first thing to do before trying to fix a jammed garbage disposal is to make sure the switch is in the off position. To be doubly safe, you should unplug the disposal from the outlet under your sink.

Next, if there is standing water in your sink, you may want to bail it out. You can reach down into the disposal with a pair of tongs (only use your hands if you’re sure there is no power to the disposal) and remove any debris that is loose. This will help the water drain and make it easier once you get rid of what is actually stuck in the garbage disposal.

Open the Cabinet and Look Under the Garbage Disposal

(A series of diagrams with this explanation would be helpful.).

Look for a small hexagonal hole in the center of the disposal bottom. Look around for a small ¼” hex wrench that fits the hole. There may be one taped to the bottom of the disposal if it has never jammed. If you were not the one who had the garbage disposal installed, you might find the wrench somewhere under the sink, or it may be that thing in the junk drawer that you always wondered what it was for. If you can’t find such a wrench, check the toolbox for an Allen wrench (also known as a hex key), or pick one up at a hardware store.

Once you have the wrench, you’re ready to begin.

  • Double-check that the disposal switch is in the Off position and the disposal is unplugged.
  • Next, insert the hex wrench into the center hole. Work the wrench back and forth until it turns one full revolution. This should have dislodged whatever was stuck.
  • After the wrench turns one full revolution, remove the wrench and use tongs or your hands to remove any debris from the disposal.
  • Allow the garbage disposal motor to coll for 3-5 minutes, then push the red reset button on the bottom of the disposal.
  • Plug the disposal back in, turn on the water, and turn on the disposal. If the disposal runs as it should, you’re done. If it is still jammed, repeat the above steps, being careful to remove debris each time the wrench makes a full revolution.

If you’ve run through these steps up to three times, you may need to call a plumber to remove the disposal to clear a jam. If you’re especially handy, you could do this yourself. Most people aren’t.

Pro tip: Make sure you put the hex wrench back under the sink when you’re done so you can easily fix a jammed garbage disposal in the future.

How to Prevent a Garbage Disposal Jam

While a garbage disposal is convenient, you shouldn’t put just anything down the disposal. Some items are too hard or too small to grind and can end up getting stuck in the impeller.

Items that commonly get stuck include:

  • Pieces of bone
  • Nutshells
  • Fruit pits (peaches, cherries, avocados, etc.)
  • Certain melon seeds
  • Pumpkin guts
  • Corn husks
  • Artichokes
  • Small pieces of gravel or sand
  • Broken glass

While it is generally OK to send carrot peelings and other vegetable peelings down your garbage disposal, be careful to keep the water running, and add small amounts at a time, rather than stuffing a bunch of stuff into the disposal and then trying to run it.

While we’re at it, there are a few things you should not put down your garbage disposal or your drain if you want to avoid a clog:

  • Animal fat, oils, and bacon grease
  • Pasta or bread (They expand when wet)

Call Plumbing By Jake for Garbage Disposal Repair and Installation

Call Plumbing By Jake at 928-377-5910 for garbage disposal repair and garbage disposal installation. You can also fill out our contact form and we’ll get back to you quickly. We serve both residential and commercial clients in Kingman, Bullhead City, Golden Valley, Lake Havasu, and surrounding areas.

How to remove a glass from a garbage disposal

Our emergency response team is ready for all your plumbing emergencies. Call day or night to speak with our emergency repair team

How do you get a stuck glass out of a garbage disposal?

You’ll want to use kitchen tongs or a needle nose pliers and pull out any large broken pieces from the disposal. Another effective way of removing the glass is to find a raw potato that is large enough to fit into the opening of the disposal and cut the bottom off of it.

Will Broken glass ruin a garbage disposal?

Glasses and dishware can occasionally break when they’re handled in the sink. Unfortunately, glass and other broken shards can make their way into your sink’s garbage disposal.

How do you remove a foreign object from a garbage disposal?

Clearing Coin Stuck in Disposal If you see a foreign object or a clog, first try removing it with some long-nose pliers or long-handled tongs — again, do not put your hand in the disposal. Even if you’re sure power to the unit is off, the blades are sharp and can still cause injury.

How do you remove metal from garbage disposal?

There’s usually a hole on the bottom end of these diposals which fits an allen wrench (hex key). Use that to work the the grinder back and forth until you feel it loosen. Then pull the metal out.

What does it mean when your garbage disposal just hums?

The humming (or sometimes buzzing) sound that your garbage disposal makes is an indication that there is power coming into the unit but the blades are not turning. The humming sound can be a sign that the motor is clogged or jammed resulting in its failure to grind.

Where is garbage disposal reset button?

The reset button is a red button located on the bottom or lower back side of the garbage disposer. If the garbage disposer gets jammed and the motor overloads, the reset button will pop out and shut the disposer off.

Does glass sharpen garbage disposal blades?

How to Sharpen Garbage Disposal Blades. In fact, most people are not even aware that you need too – or even can – make the blades sharper. Not only can you, but you absolutely should sharpen them on a regular basis. I have heard people say, “Just drop some glass down the sink and run the system.” This is a big no-no!

How do you know if garbage disposal is stuck?

You’ll know your disposal is jammed or clogged when the motor hums but the disposal doesn’t grind, is overly noisy, or runs and then stops before you turn it off. Don’t continue to run the disposal when it’s jammed—this can burn out the motor. Even when jammed, a disposal will usually drain.

Can lid stuck in garbage disposal?

Liberally apply the dish soap to the edges of the lid stuck in the drain. With the corner of a soft cloth or a cotton swab, rub the dish soap into the edges of the stuck lid. Make sure to liberally apply the soap above the rim of the lid so it has a chance to drip down between the lid and the sides of the drain.

Why did my garbage disposal suddenly stop working?

If your garbage disposal just won’t turn at all, then it’s very likely that the disposal has lost power. Your unit may have blown a circuit, or it could be unplugged. First, check the plug for your garbage disposal to ensure that it’s secure. Next, locate the reset button on the underside of the unit, and push it.

Why did my garbage disposal just stopped working?

What to do if glass gets stuck in garbage disposal?

Any remaining small pieces of glass will now be chopped up and washed down the drain. If the garbage disposal still jams, there’s probably still glass stuck in it. Turn it off immediately, turn of the cold water, and repeat the process from the beginning.

Is it normal for a cocktail shaker to get stuck?

Take the cocktail shaker, for example. One just has to combine all the ingredients, put the lid on, and mix them until it is ready to serve. However, it gets frustrating when a cocktail shaker gets stuck, causing delays in serving the drinks. But this is pretty normal and should be easy to remedy. Read on to learn more.

Why does my Shaker get stuck in the strainer?

Worst, both of the parts may get tangled and make it harder to separate them. If you can open the cap and not the strainer, you can still empty the shaker’s content. However, cleaning the shaker tin will be difficult since you cannot get your hands or cleaning tools thoroughly inside the shaker.

What to do if your cobbler Shaker gets stuck?

Fixing a stuck Cobbler shaker is a lot harder than the Boston shaker because it has more components and would require more steps to take. The strainer or the cap may get stuck while you are using it. Worst, both of the parts may get tangled and make it harder to separate them.

Posted on Last updated: March 9, 2021

Home » Kitchen » How to Remove an Object Stuck in a Garbage Disposal

A blocked garbage disposal can be a pain that may temporarily stunt your kitchen operations. If you are not in a position to use your garbage disposal, you may end up with a stinky kitchen, especially if there are food scraps in the garbage disposal.

How To Remove An Object Stuck In A Garbage Disposal

To remove glass from a garbage disposal, switch off the garbage disposal, and remove the power cord from the power outlet. The proceed to unlock it and then get the broken glass out of garbage disposal. Make sure you remove all the glass from the garbage disposal housing. You can flush it out to ensure no glass is left behind.

Unclog Eggshells In Garbage Disposal

If you have a garbage disposal with an auto-reverse grind system, use it to push the shells back out the grind them again until they are fine enough to go through the drainage pipe.

Unclog A Garbage Disposal Potato Peels

Try to use the auto-reverse grind to regrind the peels and help them to move along the drain pipe. If this does not work, proceed to dismount the garbage disposal and empty it manually.

Do not under any circumstance dip your hand into the sink drain pipe while the garbage disposal is still plugged into the power outlet especially if it is a continuous feed model. If the item stuck is within reach, you can proceed to remove them using a pair of pliers or a wire.

Also, do not put any huge hard to chop foods that may cause your garbage disposal to get jammed or dull the grinding mechanism faster.

Garbage disposal systems are a great, but often misunderstood kitchen appliance. Maybe because of their location or the fact that we use them so frequently, we often tend to take them for granted and forget that, like any piece of machinery, garbage disposals require a little love and tenderness too. Never fear though – in this blog post I am going to share with you some tips for properly maintaining and caring for your unit.

Maintenance Tips for Waste Disposal Systems

In addition to wear and tear issues that inevitably occur with improperly maintained systems, a neglected disposal unit can also lead to pipe issues, such as clogged drains, which can in turn become costly. Fortunately, proper garbage disposal care is rather simple and cheap. A little thought and effort will keep your system in tip top shape and save you a lot of grief and money.

How to Sharpen Garbage Disposal Blades

One of the biggest misconceptions about waste disposals is how to sharpen the blades. In fact, most people are not even aware that you need too – or even can – make the blades sharper. Not only can you, but you absolutely should sharpen them on a regular basis.

I have heard people say, “Just drop some glass down the sink and run the system.” This is a big no-no! It can actually cause your sink to jam up, plus glass is an inorganic item (more on this later). The best way to get your blades slicing and dicing properly is to drop some ice cubes down the drain and run your disposal. This has several benefits. First, ice is free. Second, as the ice grinds and melts, it not only sharpens the knives, it also cleans them. Two for one!

How to Remove Odor from a Garbage Disposal

There are two parts to keeping a waste disposal smell-free. The first part is not letting it get smelly to begin with! Never put food in the disposal before you are ready to use it and never let food just sit in the disposal. This lets bacteria build up and food rot, speeding up the stench process. Old food also leaks acid, which can cause the blades and unit to dull and corrode over time.

The second part of keeping your disposal clean is to use the peel from fruits like lemons, limes, oranges or grapefruits and drop them down the sink. The citric acid will help clean the germs and odor causing agents and add a nice scent to your garburator. Ice also helps to remove smelly odors in a garbage disposal unit.

Use Water Every Time

Always, always use water when using the disposal. And make sure the water is cold – warm water can interact with food particles and release chemicals that can stick to your pipes and the unit. Not using water is a sure fire way to ensure your waste disposal will burn out before its life expectancy.

My Garbage Disposal Stopped Running

Most people think this is because the system has died, burned out or has some sort of an electrical issue. More often than not, if a system has stopped working, it is because there was a jam. Waste disposal units have a safety measure to prevent burn outs when there is a bad jam. To fix this, make sure your disposal is turned off and clear the jam (if it is a bad jam or you are uncomfortable clearing the jam on your own, consult a plumbing professional).

After the jam is cleared, look under your sink at your disposal unit. There should be a red button. If it is sticking out, press it in. If a bad jam was your problem, resetting the system should do the trick.

What Not to Put In Your Garbage Disposal

Contrary to what some may say, you should not just put any old thing in your disposal. First, avoid putting anything that is not food or organic material – no paper, no metal, glass and so forth. Not only are these bad for your disposal, they are bad for your septic system as well.

You should also avoid putting food items like pasta and rice down your unit. As these items come in contact with water, they can expand, leading to clogging issues. The same can be said for grease and fatty food items. Over time these items stick to your pipes and cause clogs, and in worst-case-scenarios, can cause burst plumbing pipes – something you definitely want to avoid!

How to remove a glass from a garbage disposal

One of the most common garbage materials is broken glass. Whether it’s a wine glass, an old vase, or even parts of a shattered window, the risk of broken glass at home is unfortunately everywhere. But did you know that not many people know how to dispose of broken glass properly?

That’s right—it’s not as simple as sweeping it up and dumping it in the bin. Disposing of broken glass requires taking a few steps to ensure that the shards don’t damage other items in the garbage bin, and the people who will handle it won’t get injured in the process.

Check out our step-by-step guide to disposing of broken glass safely, from picking it up off the floor, all the way to your garbage collection bin. Plus, get answers to the most common questions about recycling broken glass:

How to Dispose of Broken Glass at Home

  1. Wrap the broken glass
    After sweeping the shards off the floor, you can’t just dump them directly in the bin. Instead, you’ll need a piece of old cloth that can handle the amount of broken glass. Make sure to secure the cloth wrapping with some tape to keep small, hazardous pieces from falling out. Wondering why you can’t just wrap the shards in another material such as newspaper? The shards can easily cut through the paper and cause injuries during handling.
  2. Break-up larger pieces
    Once you wrap the glass in cloth and secure it, you can also break the shards into smaller pieces for easier handling. You can use a hammer and apply gentle force to break the pieces. After that’s done, check your surroundings to make sure that any small shards didn’t fall out on the floor.
  3. Place wrapped shards in a box
    After the broken glass is wrapped and the shards are made smaller, place the wrapped cloth in a box with a lid. Make sure to secure the box with strong adhesive tape and label it to indicate that there’s broken glass inside. If the box is too big, consider adding items inside or putting more cloth on top of the wrapped glass. This extra step keeps the shards secure inside the box, and safe for handling.

After following these steps, you can now safely dispose of broken glass in your garbage collection bin.

Recycling Broken Glass: A Myth

One of the most common questions that homeowners have is whether broken glass can be recycled. Once disposed of or properly handled, what can you really do with broken light bulbs, window glass, and even wine glasses? The answer is that these broken glass items don’t belong in the blue bin because they don’t have the same composition as regular glass jars and containers. Here’s what you should do when you’re thinking of recycling or repurposing broken glass:

Light Bulbs

Disposing of shattered light bulbs is not as simple as sweeping the glass fragments into the bin. While incandescent and halogen bulbs can go into the trash after following our step-by-step guide on handling broken glass above, compact fluorescent bulbs are built with hazardous materials that require more delicate handling.

If an energy-efficient light-bulb bursts inside your home you should clear the room immediately to avoid exposure to toxic gases. To avoid health hazards, it’s best to take necessary precautions when handling the glass fragments and take all the pieces to a local hazardous waste drop-off facility.

Broken China

When it comes to your favourite wine and drinking glasses, it’s safe to assume that these can’t be reused. Drinking glasses and container glass cannot also be mixed when recycling because they have different chemical compositions and melting points, so recycling them together would do more harm than good.

When disposing of them, make sure to wrap the fragments in cloth separately before storing in boxes that go in the garbage collection bin. This will keep garbage handlers safe and allow them to sort the fragments correctly for disposal or repurposing.

Larger glass fragments such as mirrors require cautious handling, as the sharp and jagged ends can easily cause injuries when not disposed of properly. Before chucking them out, make sure to securely tape along the broken edges and across the rest of the remaining piece to contain the broken pieces and allow safe and easy handling during collection.

Why You Need a Mixed Waste Garbage Bin

Move over regular garbage bins because with mixed waste garbage bins , you won’t have to deal with the confusion of figuring out where specific waste materials go. Mixed waste garbage bins are designed to handle all types of household waste, and that includes properly disposed of broken glass.

To learn more about how to properly dispose of waste, call Gorilla Bins at 877-700-2467 or contact us here .

Similarly, you may ask, what do you do with a broken glass in a garbage disposal?

Use a hex key on the bottom of the disposal to manually turn the blade to help dislodge any glass blocking the blades. Vacuum again to suck up the dislodged particles of glass. If your garbage disposal unit does not have an option to insert a hex key at the bottom, use a broom stick instead.

Secondly, what should not be put in a garbage disposal? 8 Things You Should NEVER Put Down Your Garbage Disposal

  1. 1 Bones. They’ll just keep spinning around and around with the blades.
  2. 2 Celery. The fibrous strings tend to tangle around your disposal’s blades.
  3. 3 Coffee grounds. Coffee grounds are deceptive.
  4. 4 Egg shells.
  5. 5 Fruit pits.
  6. 6 Grease.
  7. 7 Pasta.
  8. 8 Potato peels.

Also question is, can you put glass in garbage?

No. Broken glass is hazardous to the workers who collect and sort your recyclables. To dispose of broken glass, seal it in a box or wrap it in several sheets of newspaper and place it in your garbage.

How do I know if my garbage disposal is broken?

How to Tell If Your Garbage Disposal Is Bad or Broken

  1. Your Garbage Disposal Won’t Turn On.
  2. You Have to Frequently Reset Your Garbage Disposal.
  3. Your Garbage Disposal Takes a Long Time to Break Down Food.
  4. Your Garbage Disposal Always Smells Bad.
  5. Your Garbage Disposal Makes a Screeching Noise.