Join the Community
Blood stain removal can be one of the most difficult cleaning processes, and depending on the surface and type of material stained, there are a number of different techniques that can be used. One of the most important things to note is that if the material that is stained is something like clothing or carpet, it is vital to use only cold or cool water and not apply heat to the stain. Heat will cook the proteins in the blood just like in meat, and the stain will be set and just about impossible to remove. In general, the best approach to blood stain removal is to use a mild mixture of soap and cold water, with a towel or sponge and blot rather than rub the blood in further.
The best methods for blood stain removal depend a great deal on the surface or material that has been stained. Typically, clothing is one of the most difficult materials when dealing with a blood stain. Anyone attempting to remove blood from clothing should carefully read any handling or washing instructions on the garment to ensure the article is not damaged during blood stain removal. Afterward, the garment should be allowed to air dry in case the stain was not completely removed, as heated drying will set the stain.
One of the best ways to remove blood is with a mixture of diluted ammonia or soap in water, which is then carefully applied and blotted repeatedly until the stain is “pulled” out of the fabric. Ammonia should not be used on delicate or animal-based materials such as silk and wool, as it can seriously damage the material. A mixture of baking soda and cool water can also be similarly used, as well as hydrogen peroxide. If peroxide is used then it may stain or bleach fabric, so it should be used very carefully and not be applied outside of the stain area.
Since blood is similar in many respects to meat included in many people’s diets, the same products used to clean meat off dishes can often be used in blood stain removal. Detergents and dishwashing solutions that contain enzymes for breaking down meat can often remove blood quite well. Similarly, meat tenderizers often contain these same types of enzymes that can break down blood stains as easily as a tough steak. These can be used in a small solution of cool water and applied like any other cleaning product, though again care should be taken with silk and wool.
Saliva also contains similar enzymes and a small amount of saliva can be applied for small stains from a bloody nose or lip. For carpet, a solution of baking soda and water, applied lightly then blotted, taking care not to push the stain in further, is usually the best method of blood stain removal. On plastic and metal, some warm water can usually be used with a damp rag to rub or wipe the stain off.
On leather or suede, a solution of mild soap in cool or lukewarm water should be prepared and stirred until bubbly. Only the foam should then be carefully applied to the stain area, then a damp cloth should be used to wipe away the stain and cleaner. It is also important to note that if the blood is somehow related to a criminal act, then the removal of the blood stain may be considered tampering with evidence and be illegal.
How to Remove Dried Blood Stains from Carpet
Dried blood may seem like it would permanently ruin your carpet, but this isn’t always the case. While it may seem like a difficult task to remove, with the right cleaning agents and a little elbow grease, you can remove dried blood from your carpet in no time.
Not only will you save money on costly carpet replacements, but you won’t have to worry about the hassle of having a new carpet installed.
If you’re wondering how to remove dried blood stains from carpet, then this guide has everything you’ll need to know for fast, easy removal.
How to Remove Dried Blood Stains From Carpet
First, gather ingredients and necessary cleaning tools. Be sure to have a white piece of cloth handy, and a spray bottle.
Water and Dish Detergent Solution
Mix cold water with dish detergent in a spray bottle, and give it a shake. Next, spray the dry blood stains with the mixture and slowly begin to run with the white cloth. As the blood transfers to the cloth, use a new one to prevent blood from transferring elsewhere on your carpet.
Baking Soda and Vinegar
If water and dish detergent don’t prove as effective as you’d like, you may find yourself how to remove old dried blood stains from carpet using other cleaning agents. This is where baking soda and vinegar come into play.
Begin mixing water and vinegar in a spray bottle. Be sure to use cold water. Next, sprinkle baking soda spray over the dried blood stain. Once you’re done with this step, spray the entire area with the water and baking soda mixture.
You’ll notice the vinegar and baking soda will react, causing a fizzing to happen. Let this dry and vacuum it. If you still see remnants of dried blood, spot touch with vinegar and baking soda and blot with a white cloth.
Another excellent way of removing driving blood from carpets is by using a salt paste. Simply mix cold water and salt until a paste is formed, and apply to your carpet. Let it dry and blog clean with a white cloth.
If you’re still wondering how to remove dried blood stains from carpet, and nothing else has worked, then try hydrogen peroxide. Put a little bit on the stain and let it sit for an hour. Blot it dry until you see the stain lift from your carpet.
Be sure to use caution with any of these methods, especially if you have children or pets that are on your carpet, as some of these ingredients can be toxic if ingested. If all else fails, be sure to call in a professional carpet cleaning service to remove dried blood stains from carpet.
Remove Dried Blood With Ease
Whether you try baking soda and vinegar or find a salt paste to be the most effective, there are various ways of getting your carpets clean and removing dried blood. Now that you know how to remove dried blood stains from carpet, you can move forward with cleaning those unwanted stains.
For professional carpet cleaning services you can rely on, contact us today. We’ve got the tools and experience to clean any stains and to leave your carpet fresher and newer looking than ever before.
Accidents happen, which is exactly why this how-to guide exists.
Just when you thought cutting your finger couldn’t get worse, you spy a spot of blood settling on your carpet. Similar to red wine and coffee stains, blood — wet or dry — can be tough to remove. That’s why Carolyn Forte, director of the Good Housekeeping Institute Cleaning Lab, shares how to get blood out of carpet, depending on the carpet cleaners you have on hand.
The next time an accident inevitably happens, take stock of your cleaning supplies and choose from one of these tried-and-tested methods. All of them are equally as effective, even if you’re tackling a dried blood stain.
How to Get Blood Out of Carpet
Like most other stains, it’s best to clean blood as quickly as you can stomach it. But if you happen to wait around (the wound is still too fresh, perhaps), then not all hope is lost: You can still follow the same cleaning method — just with a little more elbow grease.
Method 1: Detergent Solution
- If the stain has dried, gently go over it with a soft brush to break up the deposit.
- Mix one tablespoon of scent-free liquid hand dishwashing detergent with two cups of cold water. Using a clean white cloth, sponge the stain with the detergent solution.
- Blot until the liquid is absorbed. Repeat until the stain disappears, then sponge the spot with cold water and blot dry.
- If the spot still remains, mix one tablespoon of ammonia (FIY, never mix chlorine bleach and ammonia as the resulting fumes are hazardous) with 1/2 cup of warm water. Sponge the stain with the solution and blot until the liquid is absorbed. Sponge with cold water and blot dry.
Method 2: Hydrogen Peroxide
Rather than relying on trusty pantry cleaners like vinegar and baking soda, head to the medicine cabinet when you’re in a pinch. Then follow this step-by-step:
- Test the hydrogen peroxide in a hidden spot first to make sure it doesn’t change the color of the carpet.
- If you don’t notice any color changes, dip a cotton swab in hydrogen peroxide and apply it carefully to the stain.
- Rinse with wet cloth and air dry.
Method 3: OxiClean
If you prefer using speciality cleaners rather than making your own solution from scratch, then OxiClean is your friend. To use, dissolve OxiClean Versatile Stain Remover in warm water, according to package instructions. Saturate the stain and let it sit for up to five minutes before blotting with a dry cloth. And in case you’re dealing with any other stains, you can do the same with red wine, coffee, and pet messes.
Though most carpets come with anti-stain treatment, some body fluids, like blood-stains, makeups, beverages and foods might leave stains that just keep annoying you. In most cases, it’s easy to get blood out of carpets and completely remove the blood stain if you use the correct materials and methods.
We recommend professional cleaning agents to remove blood stains from your carpet. Never use chlorinated agents or bleaching agents to get blood out of carpets, as these might discolour your carpet.
Egecarpet’s Expert Guide On How to Get Blood Out of Carpets
When it comes to getting blood out of carpets – or removing any kind of stain from a carpet for that matter – the key thing to remember is that the sooner you act, the better result you’re likely to get.
If you’re unsure how to get the blood out of your carpet, you should follow these 1 to 3 first aid steps as the very first thing when discovering your stain of fresh or dried blood. Again, the faster you take action, the greater the chances of removing the blood stain from your carpet.
When you’re cleaning the blood stains from the carpet, remember to always work from the edge of the blood stain towards the centre. To prevent the cleaned area from quickly becoming soiled again after treatment, it is important to rinse off and blot up the remaining stain-removing agent.
Step #1: Wipe up any excess blood on the carpet
If the bloodstain on the carpet is fresh, first wipe up the blood with a dry, white cloth or non-dyed absorbent paper. You can, for instance, use kitchen paper towels to gently dap the blood stain.
Note: Do not rub as this might increase the blood stain. Instead, the stain should be blotted off and then you’re ready for the next step in our guide to removing blood from a carpet.
Step #2: Dissolve the blood stain in lukewarm water
The next step when you want to get blood out of carpets is to apply cold water to the blood stain (without soap, washing powder, liquid detergent or any similar agents). It is important to use cold water to remove blood from carpets because warm water follows that blood clots faster and makes the stain removing more tricky. Dab the area gently with a damp cloth, and then absorb as much of the liquid as possible by blotting with a dry, white cloth.
Step #3: Apply potato starch to the stain
After you’ve dissolved the blood stain on your carpet in lukewarm, you should drizzle potato starch on the stain and leave it to dry for 24 hours before vacuuming the carpet.
More often than not, the first three steps in this guide will be enough to get the blood out of the carpet – but if you’re still not happy with the result, continue on to step #4 below for another trick on how to remove blood from the carpet.
Step #4: Use a carpet stain remover on the blood stain
If the blood stain on your carpet is not completely removed after you’ve dissolved it in water and potato starch, your next step is to try a universal stain-removing agent. This is a little harsher on your carpets so be gentle when attempting to remove blood stains from carpets with stain-removing agents. See the instructions for use on the product’s packaging for further guidelines.
Still not happy? Read these extra tips on how to get blood out of carpets
If first aid steps 1 to 4 do not get the blood stain out of your carpet, do as follows: Dab with a cloth dipped in a solution of cold water and salt (2 tbsp. salt per liter of water). Keep dapping until the blood come loose of the carpet fiber and make sure only to use as little water and salt solution as possible.
If none of the preceding steps gets the blood out of the carpet, the blood stain must be treated using a special stain-removing agent. In general, the use and dosage instructions must be followed closely, and treatment should not take place on moist areas. Instead, the area should be left to dry before the special agent is applied to the blood stain(s).
If the treatment leaves a mark, this may indicate that the carpet is generally soiled and needs to be cleaned. If the stain re-appears after treatment, this is usually because there is still some stain-removing agent or stain residue left in the carpet. In this case, the area should be treated again according to the guidelines described in first aid step 3.
The first time a new cleaning agent or stain remover is used on the carpet, you should check whether the agent may damage the carpet. Damage occurs from colour bleed, discolouration, bleaching or dissolution. To avoid this, test both cleaning agent and stain remover on an area the size of a postage stamp. This might be in a corner, under a radiator or in a similar area.
More ways to remove blood from carpets
If you still didn’t get the blood out of the carpet, there are a few more ways to remove the blood stain. Note that these are harsher methods that could damage your carpet, so remember to always test a small area before applying the solutions to the blood stain.
Using a mixture of water and ammonia can be an effective way to remove blood stains from a carpet but remember to never use ammonia on woolen carpets. For this methods, mix 1-2 teaspoons of ammonia with water and apply the solution to the carpet. Let the solution work for 5-10 minutes before blotting the spot with a clean cloth.
Hydrogen peroxide can also be used in cases where the blood stain on the carpet is particularly persistent. Add a small portion of hydrogen peroxide to the blood stain and let it work for 1-2 hours. Then, blot the carpet clean and repeat the procedure if you’re still not happy with the results.
Carpets can last a life time!
With the right maintenance and cleaning, your carpet will retain its appearance and good qualities for many years to come. For more information about maintenance read the Service and Maintenance Guide and don’t forget: Most stains truly are removable!
Check out egecarpets anti-stain carpets if you’re looking for a carpet solution for your bar, restaurant or hotel.
Did this ever happen to you? You got injured, and you were unconsciously standing on the carpet. After a few days, when you were vacuuming the carpet, you noticed dried bloodstain, and Oh no! That is a nightmare to have bloodstain on your valuable carpet. But don’t worry, no matter how much you hear the myths about dried blood stains that they are the impossible ones to get rid of, we have not one but eight different solutions for you, with the best carpet cleaners. So let’s not waste any more time and jump to different methods to remove dried blood stains from the carpet.
How To Remove Dried Blood Stains From Carpet
Like any other stains, the best practice is to clean it with water or wet cloth immediately and then apply some detergent to the carpet area. But if the stain goes unnoticed and you notice it the next day when it has dried out, they are then hard to remove but not impossible to remove. You can still clean it as nothing happened there. Follow up these multiple methods according to your convenience and enjoy your fresh and clean carpet again.
1. Cleaning With Cold Water
To treat the dried bloodstain, the easiest and effective method is to clean it with cold water. Remember not to use hot water ever; it will make the stain stick to the carpet permanently. Take cold water in a spray bottle and dampen the stain with it. Do not use excess water and soak the stain too much. It can spread blood over the carpet.
After applying the water, take a clean white cloth or sponge and blot dry the area in an up and down motion. Do not rub the cloth or sponge over the stain. The blood will spread on the carpet and will make it worse. You have to have patience; the stain will not disappear in one go. Repeat it several times to get the results. Once you notice the stain is gone, blot the area with a clean cloth and let it air dry, and tada! You are done!.
2. Cleaning With Dish Wash Soap
If the cold water method doesn’t help the stain, you can use dilute dishwashing soap to clean it. Take a spray bottle, add 3 tablespoons of soap to the bottle filled with water, and mix it well. Apply the solution to the stain and let it seep through the stain. The soap will cut through the stain and will make it easy to clean. Let the solution stay on the stain for a while; do not rub it. Once the stain comes loose, use a wet clean cloth or sponge to blot it. Do this repeatedly until the area is spotless. In the end, allow the carpet to air dry.
3. Cleaning With Salt Paste
The following hack on our list is using a salt paste to remove the bloodstain. Salt has strong dehydrating powers; that’s why it helps lift stains, especially bloodstain, and clean them. Make a thin paste of salt by mixing it in a portion of water. Apply the paste on the stain and let it sit on the stain for 15 to 20 minutes. If the stain is very old and stubborn, leave it for a longer time. Rinse it with cold water after and blot dry the area.
4. Cleaning With Hydrogen Peroxide
Suppose your pantry items don’t help to remove the stain. Don’t worry; we have other options too. Take hydrogen Peroxide from a nearby medical store. Be careful with this method so that you do not ruin your carpet. Test out a portion of your carpet’s hidden area with it; if it doesn’t decolorize the carpet, then you can use it on the stain. Apply Hydrogen peroxide on the stain until the stain disappears. Get a wet cloth and rinse the stain. Let the area of carpet air dry in the end.
5. Cleaning With Ammonia
To clean the dried bloodstain out of the carpet, mix a tablespoon of ammonia in warm water. Apply it to the stain; it will lift the stain and make it easy to clean. Take a sponge to absorb the solution out of the carpet when the stain disappears. Blot the area with cold water and a sponge at the end of the process and let the carpet dry afterward.
6. Cleaning With Baking Soda And Vinegar
The acid-base combination of baking soda and vinegar is an expert in cleaning purposes. They can clean the most stubborn stain, even the grease stains, easily. All you have to do is take 1 cup of warm water, half a cup of white vinegar, and 2 tablespoons of baking soda and mix them well. Apply the solution on the stain and let it sit on the stain for five to 10 minutes, depending on the stain. Blot dry the carpet with a damp clean cotton cloth. Let the carpet air dry after you are finished.
7. Cleaning With Enzyme Cleaner
There are many commercial enzyme cleaners available, you can get one of these as they can cut through the complex chemicals present like blood or tough stains. Simply spray the product straight on the stain, let it seep through the stain, and lift it. Blot dry it with a damp cloth and that’s it.
8. Cleaning With Shampoo and ammonia
As said earlier, ammonia can fade the color of your carpet. That is why you can not risk your valuable carpet by leaving the ammonia over the stain for too long. If the stain is big and really tough, you can get shampoo’s help to lose the stain a bit and then treat the stain with household ammonia afterward. For shampoo, technique; mix shampoo in water and spray it over the stain. Blot it dry, and then apply ammonia for perfect results.
Apart from the hacks mentioned above, the other tips that can help you get 100% clean and fresh carpet are to scrape the dried blood with a knife (not recommended for valuable, expensive carpets) or brush to remove the flakes of dried blood. You can also use a wet vac for this performance. These head-up tricks can help you a lot.
Wrapping It Up
We know how upsetting it is to see a blood stain on your favorite valuable carpet and not to know how to deal with it. It does not only ruin the aesthetic of your house but is also very gross. We hope these tricks help you get your carpet back to its pleasant and clean state. Best of luck!
No matter if it is bloody nose from an unauthorized game of touch football in the living room or a small cut, the only thing worse than getting hurt is when you then have to clean up the mess it makes!
Blood is a very interesting thing, it is full of protein and due to the nature of blood, when it lands on the carpet, it does not want to be removed!
Today we are looking at how you can remove blood from your carpet. To make it as easy as possible, I am sharing four different methods as you will most likely have at least one of these products in your home in case you do need to clean blood from the carpet.
How To Get Blood Out Of Carpet With Baking Soda
Baking soda is one of my go to’s for many different stains and it even works on blood.
What You Need
- The first thing you need to do is combine the water and baking soda to make a paste. Put baking soda into a bowl of water and keep adding it until it makes a thick and yucky paste.
- Thoroughly cover the blood stain with your baking soda paste and if you can leave it overnight. Worst case scenario, you want to leave it for an hour.
- Using your cloth or rage, blot away (remember, no rubbing!) the baking soda paste and it will lift the blood stain with it. Use clean areas of the towel if it is getting too wet and messy.
- Once you are done, drip a little bit of water on the remaining baking soda and blot it up. Once the area is dry, you can vacuum up any remaining baking soda and see if you need to repeat the steps again to get rid of any bits of blood that remain.
How To Get Blood Out Of Carpet With Hydrogen Peroxide
Hydrogen peroxide is one of the best things out there for getting rid of blood stains!
What You Need
- Pour some hydrogen peroxide over the blood stain, making sure to cover the whole stain. It will put on a bit of a bubbling show but do not worry.
- Once the bubbling rock and roll show starts to settle down, use a paper towel to blot the area. When a towel is saturated, use a clean one.
- The bloodstain may not come up on the first attempt. If it does not, repeat the steps and eventually, the blood stain will be gone. Once the stain is gone, use paper towels to bot dry the area.
How To Get Blood Out Of Carpet With Liquid Dish Soap
Even the cheapest liquid dish soap you can get in Walmart is going to be ok for this method.
What You Need
- Cover the blood stain with your liquid dish soap. I think that it is best to live it sitting on there a few minutes. Then you need to get your spray bottle and very lightly spray the area with your water.
- Using your scrubbing brush, gently brush the area thoroughly and then use the towel to blow away the dish soap/water mix so you can see if the stain has been removed. Chances are this will not happen the first time, so be prepared to repeat this a few times.
- Once the blood stain has been completely removed, you can now spray the area with your water bottle and use the towel to blot up the remaining liquid dish soap. Let the carpet dry and you are done.
How To get Blood Out Of Carpet With Salt
Salt not only goes great on your pizza it can help clean your carpet too!
What You Need
- Pour some salt into a bowl of water, you want to put quite a lot in as you want it to form a kind of paste.
- Once you have your awesome salt paste, cover the blood stain with it. Make sure every part of the stain is covered and do not be scared to put it on really thick.
- Leave the salt paste to sit on the blood stain. In an ideal world, you will be leaving it overnight, but at the very least you want to leave it sitting on there for an hour.
- Now you use tour towel or rag to blot the stain. Do not rub it in, make sure you are only blotting it up. Keep on going until the stain is removed.
- Once the stain is fully removed, allow the carpet to dry and make sure you remove all of the salt that is left behind using a vacuum cleaner.
One extra bit of advice I want to share is that the quicker you can get to a blood stain, the easier it is for you to clean up. Dry blood can be removed from your carpet using any of the methods above.
However, it is going to take more than one going over to fully remove the stain. Also, hot water is a most definite NO when it comes to getting blood out of a carpet. This is because the heat will cause the blood stain to really set in the carpet.
I can tell you that all of the methods we have looked at today work, hydrogen peroxide is the best. Not only does it clean up the stain, it disinfects as well. I know that more than likely people will have salt, baking soda, and dish soap in their home rather than hydrogen peroxide.
I would say there is nothing wrong with using the salt, dish soap or baking soda method as a first response and then getting some hydrogen peroxide if the stain is really, really stubborn.