How to replace the honda accord 2000 car radio with a bluetooth capable system

How to replace the honda accord 2000 car radio with a bluetooth capable system

When you replace your car battery, you may need to enter your Honda radio codes to activate your radio.

You may even need to do this for a simple disconnect or a complete drain of the battery.

Normally, you can activate your radio’s battery by pressing and holding the power button for about 2 seconds.

However, this method will not always work. If your radio cannot be reset, you will need to enter your Honda radio codes.

How do you find your radio security code?

How to replace the honda accord 2000 car radio with a bluetooth capable system

Finding your Honda radio codes can help you activate your radio if your battery is disconnected. This is because Honda’s leading anti-theft technology prevents your radio from working without these codes.

The easiest way to find these codes is to look in your glove compartment for the owner’s manual, which contains a set of activation codes. Usually this is just a sticker that is placed in the glove box or in the manual. Apart from the codes, the sticker also contains your vehicle identification number, which is mentioned below.

You can also visit the Honda online store to retrieve your activation codes. You will need your zip code, email address, and other contact information, as well as your Vehicle Identification Number. While this is usually found in the driver’s door, on your registration papers, and on your car’s windshield, it can be difficult to find on models that have undergone repairs.

If you cannot find or enter your Honda radio codes, you should consider using professional services to safely reinstall and activate your radio.

How to enter Honda radio code

Entering your Honda radio codes is pretty straightforward. You have to go through the same process as for finding your serial number, with minor adjustments to enter your code. Remember to turn off the engine before turning the ignition key to the accessory position.

When the radio displays “Code” or “Enter Code”, you should use the radio’s preset switches 1 and 6 to enter your code. Your radio should now be activated and fully functional.

You should consider using professional service providers if you are uncomfortable with any part of this process, as you may have difficulty activating your radio.

Where are the VIN and serial number located?

How to replace the honda accord 2000 car radio with a bluetooth capable system

The vehicle identification numbers as well as your unit’s serial number are a critical resource in finding your Honda radio codes. These 17-digit numbers usually have a similar profile to others of the same brands.

Honda’s set of VIN codes consists of an alphanumeric scale without the letters ‘I’, ‘O’ and ‘Q’, which can cause some confusion. You will use this 17-digit code to find your radio codes through Honda’s website.

Your insurance card contains your detailed vehicle information, including your VIN number. The code can also be seen on your windshield and in the glove box. It is usually a sturdy sticker with some numbers on it.

If you have trouble finding it in your car, you might consider looking through your financial information, such as your service declaration and new owner surveys, to help you find it.

The procedure for identifying your device serial number depends on the make of your car. In most cases, it is usually located on an anti-theft sticker on a part of your car, such as the glove compartment. However, it will not always be easily and quickly available. You will need to follow these steps for your Honda vehicle, with the exception of the Honda Odyssey 2013 and 2014 models, which do not require a security code.

You should turn on your vehicle and the unit and make sure that it displays a “code” message. Turn the unit off and hold down the preset buttons 1 and 6. An alphanumeric code is displayed, starting with U followed by 4 digits. On the next screen, a second alphanumeric code is displayed. You should ignore the letters in your serial number and write down your serial number so that you can use it when retrieving your Honda radio code.

How to find your serial number on models built after 2002

You can find a serial number or your 2002 and newer models without having to completely remove your radio, which can be difficult to replace. You should press the radio’s power button, which will result in a blank display.

Make sure your engine is turned off and turn the ignition key to the accessory position. Then press the display buttons 1 and 6 on your radio while pressing the power button. Your display will show 10 digits, which you should note down.

The numeric part of your code, which consists of eight characters, will be your serial number.

How to find your serial number on models older than 2002

For models older than 2002, no serial number is displayed and it may be difficult to restore radio functionality. To obtain your serial number, you must completely remove your radio. However, it may be difficult to get it back in. Although you can still reset your Honda radio for models older than 2002, you should consider professional maintenance.

Final word

You can find your Honda radio codes through the vehicle manufacturer’s website. You can access the codes from the website using your vehicle identification number (VIN) and your serial number. However, Honda will ask you to provide detailed contact information so the code can be delivered securely.

If your vehicle is a 2001 or older model, you will need to remove your radio to access the serial number. As this can be difficult, we recommend that you visit your nearest certified dealer and service provider to avoid possible damage to your vehicle.

Once the battery is disconnected, you cannot use your Honda radio without activating it. This anti-theft service can be of great benefit to you, but it can also cause inconvenience if it needs to be reactivated regularly. This code is specific to your vehicle. However, it can be difficult to find. You should visit Honda’s website to find out how to reactivate your Honda radio and obtain the unique radio codes for your vehicle.

To keep your passengers relaxed in the back seats of your car, it is necessary for you to upgrade your factory radio by installing a new aftermarket stereo which is equipped with a lot of practical and entertainment features. If you own a 2009-2013 HONDA PILOT, and plan to upgrade your factory radio, you can read the following related installation steps to help with your installation.

How to replace the honda accord 2000 car radio with a bluetooth capable system 2009-2013 HONDA PILOT car radio after installation

Tips about the installation:

1.Please disconnect the power before the installation.

2.Please prepare a lever and a screwdriver before the removal and the installation.

3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2009-2013 HONDA PILOT car stereo installation steps

1. The original car radio.

How to replace the honda accord 2000 car radio with a bluetooth capable system

2. Start by moving shift lever into lower position.

How to replace the honda accord 2000 car radio with a bluetooth capable system

3. Using your pry tool, carefully pry loose left dash panel and slide over shifter. Then use the pry tool to remove the right panel.

How to replace the honda accord 2000 car radio with a bluetooth capable system 3-1 How to replace the honda accord 2000 car radio with a bluetooth capable system 3-2

4. Using a Philip head screwdriver to unscrew screws that fix the pocket and then remove it.

How to replace the honda accord 2000 car radio with a bluetooth capable system

5. Unscrews four screws that are holding the radio and then take out the radio.

How to replace the honda accord 2000 car radio with a bluetooth capable system

6. Check all the accessories for the new Seicane car stereo.

How to replace the honda accord 2000 car radio with a bluetooth capable system

7. Connect the harnesses to the back of the new Seicane car stereo.

How to replace the honda accord 2000 car radio with a bluetooth capable system

8. Connect the Seicane car stereo to your original stereo’s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place. All the installation is done.

Before the installation, please make clear every step. If you have any doubts, you can consult your dealer or ask someone experienced to help you. But if you still think it hard to finish the installation by yourself, you’d better go to a car stereo upgrade center to arrange a technician to install the stereo. Anyway, first of all, please check whether your new car stereo is compatible with your car or not. If not, here I would like to share a 2009-2013 HONDA PILOT gps navi dvd car stereo from Seicane with you. Please click:

This Seicane 2009-2013 HONDA PILOT car stereo is based on the Pure Android 6.0 operation system and a R16 1.6 GHz Quad-core CPU, so you are able to embrace a brand new smoother and faster operation experience than ever. Even though you don’t have a good sense of direction, you are capable of finding the best way to get to your destinations with the help of the powerful 3D GPS navigation system in high precision. What’s more, with the help of the wireless Bluetooth technology, hands-free calls and Bluetooth music are both available if you connect your Bluetooth-enabled cell phone with this unit. If you like this car stereo, don’t forget to add it to your cart. Good luck to you!

How to replace the honda accord 2000 car radio with a bluetooth capable system

Bworks3

Senior Member
  • Thread starter
  • #1

I am still deciding between LX and EX.
Was thinking I could save a few bucks and invest into a decent aftermarket stereo and maybe a little amp and a small sub.
Not sure if aftermarket stereo units are much better or as comprehensive.

I was looking into head units and I found several with built in GPS, touch screen, bluetooth, hdmi, hd, etc. between $160-$600 and the apple/android app specific units are $6-700.
http://www.carid.com/2016-honda-civic-stereos/

The units that were apple and android app ready started off at $600.
I’m wondering if there are any system limitations with using them as opposed to the OEM head unit and if they are any better?
Has anyone gone down this road yet?

How to replace the honda accord 2000 car radio with a bluetooth capable system

markhu

Member

makemerush

Senior Member

The OEM head unit is extremely buggy and the OEM speakers on the Touring are bad. CarPlay is awesome though (besides how the right signal cuts Siri off – very annoying).

I wouldn’t be surprised if I upgraded the head unit within a year, especially if they don’t release a firmware update.

I was hoping somebody would’ve posted an audio system upgrade tutorial for the 2016 Civic by now but I guess I’m going to have to wing it after Christmas.

I’m going to install two Polk db651S, a Kenwood KAC-8105D (mono amp) and a Pioneer TS-SWX251 subwoofer from my previous Civic and two new Polk db651. I’m also considering also replacing the rear deck “subwoofer” (it rattles and has no bass) with something better. I haven’t looked closely so I don’t know if the Polk db840 or db840dvc would work in that application, and I don’t know what I would use to power it since I don’t really want to buy another amp.

turbo96xx

Member

The OEM head unit is extremely buggy and the OEM speakers on the Touring are bad. CarPlay is awesome though (besides how the right signal cuts Siri off – very annoying).

I wouldn’t be surprised if I upgraded the head unit within a year, especially if they don’t release a firmware update.

I was hoping somebody would’ve posted an audio system upgrade tutorial for the 2016 Civic by now but I guess I’m going to have to wing it after Christmas.

I’m going to install two Polk db651S, a Kenwood KAC-8105D (mono amp) and a Pioneer TS-SWX251 subwoofer from my previous Civic and two new Polk db651. I’m also considering also replacing the rear deck “subwoofer” (it rattles and has no bass) with something better. I haven’t looked closely so I don’t know if the Polk db840 or db840dvc would work in that application, and I don’t know what I would use to power it since I don’t really want to buy another amp.

How to replace the honda accord 2000 car radio with a bluetooth capable system

If your car lacks a Bluetooth feature than you are missing a lot of fun. This amazing technology that we call as Bluetooth comes with a feature that can allow two different devices to connect with each other remotely and there is no wire connection between them. In this article, our editors have explained the best ways that will help you add Bluetooth connection in your car.

How to replace the honda accord 2000 car radio with a bluetooth capable system

Many newer cars come with a Bluetooth GPS system. Bluetooth is a wireless system, and as long as the car has a receiver, Bluetooth can be used with your phone, without the need for additional devices like earpieces. Because many states have now banned driving with a phone, hands-free systems are highly desired. Purchasing a vehicle with Bluetooth already installed will ensure that the system works from the get-go. There is no need to install the system yourself.

The best Bluetooth adapter for your car is also one that you do not have to configure each time you want to use your device(s). Rather, it automatically pairs with your device(s) when you enter the vehicle. Some remember devices they have been previously paired with and they will automatically connect if they are within range. Pairing is also important if you intend to stream favorite (Pandora) stations. You want your Bluetooth to unobtrusively connect.

How to replace the honda accord 2000 car radio with a bluetooth capable system

Given the choice between an AUX-in or FM Transmitter, the AUX-in Bluetooth car kit is the better choice. And of these kits, the SoundBot SB360 is one of the best AUX-in kits on the market for both sound quality and price. In my tests, it performed among the best Bluetooth car kits for audio signal and clarity. In many ways, it’s almost identical to the Anker SoundSync Drive, the best Bluetooth car kit overall. It’s even better at hands-free calling. The audio signal isn’t the strongest, but the clarity of the signal is excellent. The difference between its audio quality and a Bluetooth FM transmitter is night and day. The only consideration is whether your stereo has an auxiliary input.

Given the choice between an AUX-in or FM Transmitter, the AUX-in Bluetooth car kit is the better choice. And of these kits, the SoundBot SB360 is one of the best AUX-in kits on the market for both sound quality and price. In my tests, it performed among the best Bluetooth car kits for audio signal and clarity. In many ways, it’s almost identical to the Anker SoundSync Drive, the best Bluetooth car kit overall. It’s even better at hands-free calling. The audio signal isn’t the strongest, but the clarity of the signal is excellent. The difference between its audio quality and a Bluetooth FM transmitter is night and day. The only consideration is whether your stereo has an auxiliary input.

How to replace the honda accord 2000 car radio with a bluetooth capable system

When the connection has been successfully established, the note Sending data is shown. Data received via Bluetooth can be found in the Inbox folder in Messaging. Tip: Pairing is a means of authentication. The users of the devices using Bluetooth technology should agree together what the passcode is, and use the same passcode for both devices in order to pair them. Devices that do not have a user interface have a preset passcode.

By the way, you can buy the 9012 led bulb for your car light on the website, to choose the suitable one for you.